Dynamic balancing of hexapods for high-speed applications

Robotica

Volumn 17, Issue 3, 1999, Pages 335-342

  Xi, F ^a  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

DEGREES OF FREEDOM (MECHANICS); KINEMATICS; MACHINE TOOLS; MANIPULATORS; POSITION CONTROL; SERVOMECHANISMS;

DYNAMIC BALANCING; HEXAPODS; TOOL HOLDER;

END EFFECTORS;

EID: 0032634392     PISSN: 02635747     EISSN: None     Source Type: Journal    
DOI: 10.1017/S0263574799001484     Document Type: Article

References (34)

1. U. Heisel, and M. Gringel, "Machine tool design requirements for high-speed machining," Annals of the CIRP 45(1), 389-392 (1996).
2. D. Stewart, "A platform with six degrees of freedom" Proceedings of the Institution of Mechanical Engineers 180, No. 5, 371-378 (1965).
3. J.L. Overholt and A.A. Zeid, "Partial state feedback linearized based control for a steward platform" Proceedings of the 1991 Summer Computer Simulation Conference (1991) pp. 512-517.
4. The UH IfA Detector Lab, Wed site home page (1998).
5. T. Tanikawa, T. Arai and T. Masuda, "Development of micro manipulation system with two-finger micro hand" Proceedings of IROS 96, (1996) pp. 850-855.
6. M. Suzuki, K. Watanabe, T. Shibukawa, T. Tooyama and K. Hattori, "Development of milling machine with parallel mechanismToyota Technical Review, Vol. 47, No. 1, pp. 125-130 (1997).
7. H. Ouyang, C. Mechefske and F. Xi, "Effect of the leg errors on hexapod location accuracy" COMADEM 98 (1998).
8. K.H. Hunt, Kinematic Geometry of Mechanisms (Clarendon Press, Oxford 1978).
9. C.F. Earl and J. Rooney, "Some kinematics structures for robot manipulator design" ASME Journal of Mechanisms, Transmissions, and Automation in Design 105, 15-22 (1983).
10. G. Pritschow and W. Philip, "Direct drives for high dynamic machine tool axes" Annals of the CIRP 41(1) 441-415 (1992).
11. F. Pierrot, A. Fournier and P. Dauchez, "Towards a fully-parallel 6 DOF robot for high-speed applications" Proceedings of the 1991 IEEE ICRA, (1991) pp. 1288-1293.
12. F. Behi, "Kinematic analysis for six-degree-of-freedom 3-PRPs parallel mechanism" IEEE Transactions on Robotics and Automation 3, No. 3, 561-565 (1988).
13. L-W. Tsai, "Systematic Enumeration of Parallel Manipulators" ISR Technical Research Report (The University of Maryland, 1998).
14. E.F. Fitcher, "A Stewart platform-based manipulator: general theory and practical construction" Int. J. Robotics Research 5, No. 2, 157-182 (1986).
15. K. Sugimoto, "Kinematic and dynamic analysis of parallel manipulators by means of motor algebra" J. Mechanisms, Transmissions, and Automation in Design 109, 3-7 (1987).
16. J-P. Merlet, "Singular configurations of parallel manipulators and Grassman geometry" Int. J. Robotics Research 8, No. 5, 45-56 (1989).
17. C. Gossselin and J. Angeles, "The optimum kinematic design of a planar three-degree-of-freedom parallel manipulator" Mechanisms, Transmissions, and Automation in Design 110, 35-41 (1988).
18. R.S. Stoughton and T. Arai, "A modified Stewart platform manipulator with improved dexterity" IEEE Transactions on Robotics and Automation 9, No. 2, 166-173 (1993).
19. H. Asada and J.-J.E. Slotine, Robot Analysis and Control (John Wiley and Sons, New York, 1985).
20. J.Y.S. Luh, M.W. Walker and R.P.C. Paul, "On-line computational scheme for mechanical manipulators" ASME Journal of Dynamic Systems, Measurements, and Control 102, 102-110 (1980).
21. M.W. Walker, "Adaptive control of manipulators containing closed kinematic loops" IEEE Transactions on Robotics and Automation 6, No. 1, 10-19 (1990).
22. Geodetic, Hexapod: the technology breakthrough (Geodetic Technology Ltd., UK, 1996).
23. F. Xi and R.G. Fenton, "Modeling and analysis of flexible link manipulators using the algebra of rotations" IEEE Transactions on Systems, Man, and Cybernetics 24, No. 7, 1022-1034 (1994).
24. J-P. Merlet, "Direct kinematics and assembly modes of parallel manipulators" Int. J. Robotics Research 11, No. 2, 150-162 (1992).
25. J-P. Merlet, "Closed-form resolution of the direct kinematics of parallel manipulators using extra sensors data" Proceedings of the 1993 IEEE IRCA (1993) pp. 200-204.
26. Ji Zhiming, "Dynamics decomposition for Stewart platform" J. Mechanical Design 116, 67-69 (1994).
27. M. Raghavan and B. Roth, "On the design of manipulators for applying wrenches" Proceedings of the 1989 IEEE International Conference on Robotics and Automation (1989) pp. 438-443.
28. M. Jean and C. Gosselin, "Static balancing of planar parallel manipulators" Proceedings of the 1996 IEEE International Conference on Robotics and Automation (1996) pp. 3732-3737.
29. R.S. Berkof and G.G. Lowen, "A new method for completely force balancing simple linkages" J. Engineering of Industry, Transactions of the ASME, 91B, 21-26 (1969).
30. C. Bagci, "Complete shaking force and shaking moment balancing of link mechanisms using balancing idler loops" ASME Journal of Mechanical Design 104, 482-493 (1982).
31. J.R. Singh and J.R. Rastegar, "Optimal synthesis of robot manipulators based on global dynamic parameters" Int. J. Robotics Research 11, No. 6, 538-548 (1992).
32. H. Asada, "A geometrical representation of manipulator dynamics and its application to arm design" ASME Journal of Dynamic Systems, Measurement and Control 105, 131-135 (1983).
33. O. Ma and J. Angeles, "Optimum design of manipulators under dynamic isotropy conditions" Proceedings of the 1993 IEEE IRCA (1993) pp. 470-475.
34. G.J. Wien, R.A. Scott and M.Y. Zarrugh, "The role of inertia sensitivity in the evaluation of manipulator performance" ASME Journal of Dynamic Systems, Measurement and Control 111, No. 2, 194-199 (1989).