Modeling mixed hardening of alkali halides with a modified version of an internal state variables model

International journal of plasticity

Volumn 15, Issue 10, 1999, Pages 1067-1088

  Aubertin, Michel ^a   Yahya, Ould Mohamed Lemine ^a   Julien, Michel ^b  

^a Ecl P ^*  (Canada)

^b GOLDER ASSOCIATES LTD   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSION TESTING; DUCTILITY; HARDENING; KINEMATICS; LOAD TESTING; MATHEMATICAL MODELS; POLYCRYSTALLINE MATERIALS; VISCOPLASTICITY;

CONVENTIONAL TRIAXIAL COMPRESSION (CTC) TESTS; INTERNAL STATE VARIABLES (ISV) MODEL; REDUCED TRIAXIAL EXTENSION (RTE) TESTS;

SODIUM CHLORIDE;

EID: 0032597920     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(99)00025-X     Document Type: Article

References (78)

1. Abdul-Latif, A., 1996. Constitutive equations for cyclic plasticity of Waspaloy. Int. Journal of Plasticity 12, 767-785.
2. Allemandou, X., Dusseault, M.B., 1993. Healing process and transient creep of salt rocks. In: Anagnostopoulos, A., Schlosser, F., Kalteziotis, N., Frank, R. (Eds.), Geotechnical Engineering of Hard Soils - Soft Rocks. Balkema, Rotterdam, pp. 1581-1590.
3. Armstrong, P.J., Frederick, C.O., 1966. A mathematical representation of the multiaxial Bauschinger effect. Report RD/B/N731. Central Electric Generating Board, Berkeley Nuclear Laboratories.
4. Aubertin, M., 1989. Développement d'un Modèle Viscoplastique Unifié avec Variables Internes pour le Comportement Rhéologique du Sel Gemme. Ph.D. thesis, École Polytechnique de Montréal.
5. Aubertin M., Gill D.E. Elastoplastic modeling for the ductile behavior of polycristalline sodium chloride with SUVIC. Int. Journal of Plasticity. 9:1993;479-505.
6. Aubertin, M., Gill, D.E., Ladanyi, B., 1987. The active stress concept and the creep of rocksalt. In: Proc. 6th International Congress on Rock Mechanics, Vol. III. Balkema, Rotterdam, pp. 1501-1503.
7. Aubertin M., Gill D.E., Ladanyi B. A unified viscoplastic model for the inelastic flow of alkali halides. Mechanics of Materials. 11:1991;63-82.
8. Aubertin, M., Gill, D.E. & Ladanyi, B., 1993b. Modeling the transient inelastic flow of rocksalt. In: Proc. 7th Symp. on Salt, Vol. 1, Kyoto, pp. 93-104.
9. Aubertin, M., Gill, D.E., Servant, S., 1996. Preliminary determination of constants for an updated version of the Suvic model. In: Proc. 3th Conference on the Mechanical Behavior of Salt, 14-16 September 1993, Palaiseau. Trans Tech Publications, Clausthel-Zellerfeld, pp. 19-30.
10. Aubertin, M., Hardy Jr., H.R. (Eds.), 1998. Proc. 4th Conference on the Mechanic Behavior of Salt, 17-18 June 1996, Montreal. Trans. Tech. Publ., Clausthal-Zellerfeld, Germany.
11. Aubertin, M., Julien, M.R., Li, L., 1998. The semi-brittle behavior of low porosity rocks. Keynote Lecture. Proc. 3rd North American Rock Mechanics Symposium (NARMS'98). CANCUN, Mexico, Vol. 2, pp. 65-90.
12. Aubertin, M., Julien, M.R., Servant, S., Gill, D.E., 1999. A rate dependant model for the ductile behavior of salt rocks. Canadian Geothechnical Journal, in press.
13. Aubertin M., Servant S., Gill D.E. Experimental identification of kinematic and isotropic hardening in rocksalt. Nelson P., Laubach S. Rock Mechanics - Models and Measurements Challenges for Industry. 1994;723-730 Balkema, Rotterdam.
14. Aubertin, M., Sgaoula, J., Gill, D.E., 1993a. A damage model for rocksalt: application to tertiary creep. In: Proc. 7th Symp. on Salt, Vol. 1, Kyoto, pp. 117-125.
15. Aubertin, M., Simon, R., 1997. A damage initiation criterion for low porosity rocks. Int. J. Rock Mech. Min. Sci. 34, (314), paper 17 (10 pages CD-Rom, Elsevier).
16. Basuroychowdury I.N., Voyiadjis G.Z. A multiaxial cyclic plasticity model for non-proportional loading cases. Int. Journal of Plasticity. 14:1998;855-870.
17. Brady B.H.G., Brown E.T. Rock Mechanics for Underground Mining. 2nd Edition. 1992;Chapman and Hall, London.
18. Busso E.P., McClintock F.A. A dislocation mechanics-based crystallographic model of a B2-type intermetallic alloy. Int. Journal of Plasticity. 12:1996;1-28.
19. Cailletaud G. A micromechanical approach to inelastic behavior. Int. Journal of Plasticity. 8:1992;55-73.
20. Chaboche J.L. Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int. Journal of Plasticity. 5:1989;247-302.
21. Chaboche J.L. Unified cyclic viscoplastic constitutive equations: development, capabilities and thermodynamic framework. Krausz A.S., Krausz K. Unified Constitutive laws of Plastic Deformation. 1996;1-68 Academic Press, San Diego.
22. Chaboche J.L., Nouailhas D. Constitutive modelling of ratchetting effects, parts I and II. ASME J. Eng. Mat. Tech. 111:1989;384-392. , 409-416.
23. Chan K.S., Bodner S.R., Lindholm U.S. Phenomenological modelling of hardening and thermal recovery in metals. ASME J. Eng. Mat. Tech. 110:1988;1-8.
24. Langdon T.G. Characteristics of creep deformation in ceramics. Mat. Sci. Tech. 7:1991;577-584.
25. Corona E., Hassan T., Kyriakides S. On the performance of kinematic hardening rules in predicting a class of biaxial ratchetting histories. Int. Journal of Plasticity. 12:1996;117-145.
26. Cristescu, N.D., Suliciu, I., 1982. Viscoplasticity. Martinus Nijhoff.
27. Delobelle, P., Oytana, C., Mermet, A., 1984. Constitutive laws of 316 stainless steel in high temperature creep by biaxial experiments. In: Proc. 4th Int. Conf. On Mech. Behaviour of Materials, Vol. I. Pergamon Press, pp. 141-147.
28. Dusseault, M.B., 1989. Salt rock behavior as an analogue to the behavior of rock at great depth. In: Rock at Great Depth, Balkema, Rotterdam, pp. 11-17.
29. Estrin, Y., 1991. A versatile unified constitutive model based on dislocation density evolution. In: Proc. Conference on High Temperature Constitutive Modeling: Theory and Application, (Preprints) December. ASME, Atlanta, 26 pages.
30. Estrin Y., Mecking H. An extension of the Bodner-Partom model of plastic deformation. Int. Journal Plasticity. 2:1986;73-85.
31. Evans R.W., Harrison G.F. The development of a universal equation for secondary creep rates in pure metals and engineering alloys. Metal Sci. 10:1976;307-313.
32. Evans R.W., Harrison G.F. Comparison between the sinh and effective stress equations for secondary creep rate. Mat. Sci. Engng. 37:1979;271-281.
33. Evans H.E., Knowles G. Dislocation creep in non-metallic materials. Acta Met. 26:1978;141-145.
34. François D., Pineau P., Zaoui A. Comportement Mécanique des Matériaux - Vol. II, Viscoplasticité, Endommagement, Mécanique de la Rupture, Mécanique du contact. 1995;Hermes, France.
35. Freed A.D., Walker K.P. Viscoplasticity with creep and plasticity bounds. Int. Journal of Plasticity. 9:1993;213-242.
36. Ghoreychi, N., Bérest, P., Hardy, H.R., Langer, M., (Eds.), 1996. Proc. 3rd conference on the Mechanic Behavior of Salt, 14-16 September 1993, Palaiseau. Trans. Tech. Publ., Clausthal-Zellerfeld, Germany.
37. Gupta I., Li C.M. Stress relaxation, internal stress and work hardening in LiF and NaCl crystals. Mat. Science Engng. 6:1970;20-26.
38. Haasen, P., 1985. Dislocations and the plasticity of ionic crystals. In: Dislocations and Properties of Real Materials. Inst. of Metals, pp. 312-332.
39. Hunsche, U., 1988. Measurements of creep in rock salt at small strain rates. Proc. 2nd Conf Mech. Behavior of Salt, Hannover, 1984. Trans. Tech. Pub., pp. 187-196.
40. Hunsche, U., 1994. Uniaxial and triaxial creep and failure tests on rock: experimental technique and interpretation. In: Cristescu, Gioda (Eds.), Viscoplastic Behavior of Geomaterials. CSIM - courses and lectures no. 350. Springer-Verlag, pp. 1-54.
41. Hunsche, U., Schultz, O., 1994. Das Kriechverhalten von Steinsalz, In: Kali und Steinsalz. Band 11, pp. 238-255.
42. Ishikawa, H., Sasaki, K., 1995. A unified constitutive model for plasticity, creep and ratcheting. In: Proc. Plasticity'95, 5th Int. Symp. on Plasticity and its Current Application, Sakai, pp. 605-608.
43. Julien, M.R., 1999. Une Modélisation Constitutive et Numérique du Comportement Mécanique du sel Gemme. Ph.D. thesis, Ecole Polytechnique de Montréal, in preparation.
44. Kalidindi S. Modeling the strain hardening response of FCC alloys. Int. Journal of Plasticity. 14:1998;1265-1277.
45. Klepaczko, J.R., 1992. On evolution of mobile dislocation density at different conditions of plastic deformation. In: Modelling of Plastic Deformation and Its Engineering Applications, 13th Riso Int. Sym. On Materials Science, 7-11 September, Roskilde, Denmark, pp. 303-310.
46. Kocks, U.F., 1987. Constitutive behavior based on crystal plasticity. In: Unified Constitutive Equations for Creep and Plasticity. Elsevier Applied Science, Amsterdam, pp. 1-88.
47. Korhonen M.A., Li C.Y., Gibeling J.C. A state variable approach to transient creep deformation in stress reduction experiment. Mat. Sci. Engng. 74:1985;179-188.
48. Korhenen, M.A., Hannula, S.P., Li, C.Y., 1987. State variables theories based on Hart's formulation. In: Unified Constitutive Equations for Creep and Plasticity. Elsevier Appl. Sci., pp. 89-137.
49. Kovács I., Vörös G. On the mathematical description of the tensile stress-strain curves of polycrystalline face centered cubic metals. Int. Journal of Plasticity. 12:1996;35-43.
50. Krausz A.S., Krausz K. Unified Constitutive Laws of Plastic Deformation. 1996;Academic Press, San Diego.
51. Krieg, R.D., 1982. A unified creep-plasticity model for halite. In: Mechanical Testing for Deformation Model Development. ASTM STP 765, pp. 139-147.
52. Langer, M., 1993. The rheological behavior of rock salt. General report. In: Proc. 7th ISRM, Cong., Aachen, Vol. III, Balkema, Rotterdam, pp. 1811-1819.
53. Lemaitre J., Chaboche J.L. Mechanics of Solid Materials. 1990;Cambridge University Press, Cambridge.
54. Lowe T.C., Miller A.K. Modelling internal stresses in the nonelastic deformation of metals. J. Engng. Mat. and Tech., ASME. 108:1986;365-373.
55. Lubliner, J., 1990. Plasticity Theory. MacMillan Publishing Company.
56. Marchand N.J., Moosbrugger J.C. Non-linear structural modeling for life predictions: physical mechanisms and continuum theories. Int. J. Pres. Ves. Piping. 47:1991;79-112.
57. Mecking, H., Claussen, N., Petermann, H.J., 1989. Microstructural concepts for strengthening of metals, ceramics and polymers. In: Proc. ICSMA 8, Strength of Metals and Alloys. Pergamon Press, pp. 81-96.
58. Miller, A.K., (Ed.), 1987. Unified Constitutive Equations for Creep and Plasticity. Elsevier Applied Science, Amsterdam.
59. Moosbruger J.C., McDowell D.L. A rate dependent bounding surface model with a generalized image point for cyclic nonproportional viscoplasticity. J. Mech. Phys. Solids. 38:1990;627-656.
60. Mroz Z., Trampczynski W.A. On the creep hardening rule for metals with a memory of maximal prestress. Int. J. of Solids and Structures. 20:1984;467-486.
61. Mughrabi H. Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals. Acta Met. 31:1983;1367-1379.
62. Munson, D.E., Wawersik, W., 1993. Constitutive modeling of salt behavior - state of the technology. In: Proc. 7th ISRM, Cong., Vol. II, Aachen, Balkema, Rotterdam, pp. 1797-1810.
63. Munson, D.E., De Vries, K.L., Fossum, A.F., Callahan, G.D., 1996. Extension of the M-D model for treating stress drops in salt. In: Ghoreychi et al. (Eds.), Proc. 3rd Conference on the Mechanical Behavior of Salt, 14-16 September, Palaiseau. Trans Tech Publications, Clausthal-Zellerfeld, Germany, pp. 31-44.
64. Nix, W.D., Ilschner, B., 1980. Mechanisms controlling creep of single phase metals and alloys. In: Proc. 5th Int. Conf. On Strength of Metals and Alloys, Vol. III, pp. 1503-1530.
65. Ohno N., Abdel-Karim M., Kobayashi M., Igari T. Ratchetting characteristics of 316 FR steel at high temperature, part I: strain-controlled ratchetting experiments and simulations. Int. Journal of Plasticity. 14:1998;355-372.
66. Orlova A. On the relation between dislocation structure and internal stress measured in pure metals and single phase alloys in high temperature creep. Acta Met. Materi. 39:1991;2805-2813.
67. Penkalla, H.J., Schubert, F., Nickel, H., 1989. Analysis, application and experimentally verification of creep laws in multiaxial and complex loading conditions on Inconel 617 tube material. In: Proc. Int. Conf. On Constitutive Laws for Engineering Materials, 11-13 August, Chongqing, China. Int. Academic Publ., pp. 399-404.
68. Pilvin, P., 1988, Approches Multiéchelles pour la Prévision du Comportement Anélastique des Métaux. Ph.D. thesis, Université Paris VI, France.
69. Pilvin, P., 1994. The contribution of micromechanical approaches to the modelling of inelastic behavior of polycrystals. In: Proc. 4th International Conference on Biaxial-Multiaxial Fatigue, 31 May-3 June 1994, Paris, pp. 31-46.
70. Pudewills, A., Hornberger, K., 1993. A unified viscoplastic model for rock salt. In: Ghoreychi et al. (Eds.), Proc. 3rd Conf. Mechanical Behavior of Salt, 14-16 September, Palaiseau. Trans Tech Publications, Clausthal-Zellerfeld, Germany, pp. 45-52.
71. 2 hypereutectic salt between 500 and 1015. K. Mat. Sci. Engng. A. 124:1990;113-123.
72. Raj S.V., Iskovitz I.S., Freed A.D. Modeling the role of dislocation substructure during class M and exponential creep. Krausz A.S., Krausz K. Unified Constitutive laws of Plastic Deformation. 1996;343-439 Academic Press, San Diego.
73. Rawley M.A., Thornton E.A. Constitutive modeling of the visco-plastic response of hastelloy-X and aluminium. J. Engng. Mater. Tech., ASME. 118:1996;19-27.
74. Senseny P.E., Hansen F.D., Russel J.E., Carter N.L., Handin J.W. Mechanical behavior of rock salt: phenomenology and micromechanisms. Int. J. Rock Mechanics, Mining Sciences and Geomechanical Abstracts. 29:1992;363-378.
75. Senseny P.E., Brodsky N.S., De Vries K.L. Parameter evaluation for a unified constitutive model. J. of Engng. Mat. Tech., ASME. 115:1993;157-162.
76. Sprackling M.T. Dislocation mobility and work hardening in sodium chloride. Phil. Mag. 27:1973;265-271.
77. Weidinger, P., Blum, W., Hampel, A., Hunsche, U., 1998. Description of the creep of rocksalt with composite model - I. Transient creep. In: Aubertin, M., Hardy Jr., H.R. (Eds.), Proc. 4th Conference on the Mechanical Behavior of Salt, Trans. Tech. Publications, Clausthel-Zellerfeld, pp. 277-285.
78. Zaman, M., Faruque, M.O., Hossain, M.I., 1992. Modeling creep behavior of rock salt. Composite Material Technology, Petroleum Division of the ASME, Vol. 45, pp. 51-56.