메뉴 건너뛰기




Volumn 48, Issue 3, 1999, Pages 176-187

The relationship between wear behaviour and brittleness index in engineering ceramics and dispersion-reinforced ceramic composites

Author keywords

[No Author keywords available]

Indexed keywords

BRITTLENESS; DISPERSIONS; FRACTURE TOUGHNESS; HARDNESS; WEAR RESISTANCE;

EID: 0032591129     PISSN: 00205214     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article
Times cited : (31)

References (38)
  • 2
    • 0029404045 scopus 로고
    • Novel alumina-titanium-carbonitride nickel composites
    • P. Bowen: Novel Alumina-Titanium-Carbonitride Nickel Composites. JOM 47 (1995) [11] 56-58
    • (1995) JOM , vol.47 , Issue.11 , pp. 56-58
    • Bowen, P.1
  • 3
    • 0029733074 scopus 로고    scopus 로고
    • Wear properties of alumina/aluminium composites with interpenetrating networks
    • M. Sternitzke, M. Knetchel, M. Hoffnan, E. Broszeit, J. Rödel: Wear Properties of Alumina/Aluminium Composites with Interpenetrating Networks. J. Amer. Ceram. Soc. 79 (1996) [1] 121-128
    • (1996) J. Amer. Ceram. Soc. , vol.79 , Issue.1 , pp. 121-128
    • Sternitzke, M.1    Knetchel, M.2    Hoffnan, M.3    Broszeit, E.4    Rödel, J.5
  • 4
    • 0039525804 scopus 로고
    • Innovative ceramic cutting tools for machining different materials
    • Ed. S. Meriani, V. Sergo. Faenza: Editrice SpA.
    • G. E. D'Errico, R. Calzavarini, R. Chiara F. Rabezzana: Innovative Ceramic Cutting Tools for Machining Different Materials. In: 4th Euroceramics. Ed. S. Meriani, V. Sergo. Faenza: Editrice SpA. 3 (1995) 257-262
    • (1995) 4th Euroceramics , vol.3 , pp. 257-262
    • D'Errico, G.E.1    Calzavarini, R.2    Chiara, R.3    Rabezzana, F.4
  • 5
    • 0018926872 scopus 로고
    • Abrasive wear of brittle solids
    • M. A. Moore, F. S. King: Abrasive Wear of Brittle Solids. Wear 60 (1980) 123-140
    • (1980) Wear , vol.60 , pp. 123-140
    • Moore, M.A.1    King, F.S.2
  • 6
    • 0029389340 scopus 로고
    • Microstructural influence in slurry erosion of ceramics
    • S. Lathabai, D. C. Pender: Microstructural Influence in Slurry Erosion of Ceramics. Wear 189 (1995) 122-135
    • (1995) Wear , vol.189 , pp. 122-135
    • Lathabai, S.1    Pender, D.C.2
  • 7
    • 0017720061 scopus 로고
    • Verschleiß-verhalten keramischer werkstoffe
    • U. Dworak, H. Olapinski, W. Stannek: Verschleiß-verhalten keramischer Werkstoffe. Ber. Dt. Keram. Ges. 54 (1977) [12] 416-419
    • (1977) Ber. Dt. Keram. Ges. , vol.54 , Issue.12 , pp. 416-419
    • Dworak, U.1    Olapinski, H.2    Stannek, W.3
  • 9
    • 0042891621 scopus 로고
    • Wear resistance of ceramic matrix composites with particulate and whisker dispersoids
    • S. T. Buyan, S. F. Wayne, M. L. Huckabee: Wear Resistance of Ceramic Matrix Composites with Particulate and Whisker Dispersoids. J. Hard Mat. 3 (1992) 379-391
    • (1992) J. Hard Mat. , vol.3 , pp. 379-391
    • Buyan, S.T.1    Wayne, S.F.2    Huckabee, M.L.3
  • 10
    • 0017005646 scopus 로고
    • Quasi-static solid particle damage in brittle solids-I. Observations, analysis and implications
    • A. G. Evans, T. R. Wilshaw: Quasi-Static Solid Particle Damage in Brittle Solids-I. Observations, Analysis and Implications. Acta Metall. 24 (1976) 939-956
    • (1976) Acta Metall. , vol.24 , pp. 939-956
    • Evans, A.G.1    Wilshaw, T.R.2
  • 11
    • 0028743085 scopus 로고
    • Material properties of ceramic cutting tools
    • S. Kim: Material Properties of Ceramic Cutting Tools. Key Eng. Mats. 96 (1994) 33-80
    • (1994) Key Eng. Mats. , vol.96 , pp. 33-80
    • Kim, S.1
  • 12
    • 0029732130 scopus 로고    scopus 로고
    • Slurry abrasion resistance of engineering ceramics
    • J. R. Alcock, O. T. Sorensen: Slurry Abrasion Resistance of Engineering Ceramics. Brit. Cer. Trans. 95 (1996) [1] 30-34
    • (1996) Brit. Cer. Trans. , vol.95 , Issue.1 , pp. 30-34
    • Alcock, J.R.1    Sorensen, O.T.2
  • 13
    • 0020718748 scopus 로고
    • Effect of material parameters on the erosion resistance of brittle materials
    • S. M. Wiederhorn, B. J. Hockey: Effect of Material Parameters on the Erosion Resistance of Brittle Materials. J. Mat. Sci. 18 (1983) 766-780
    • (1983) J. Mat. Sci. , vol.18 , pp. 766-780
    • Wiederhorn, S.M.1    Hockey, B.J.2
  • 15
    • 0030368419 scopus 로고    scopus 로고
    • Degradation of structural ceramics by erosion
    • J. L. Routbort: Degradation of Structural Ceramics by Erosion. J. of Nondestruct. Eval. 15 (1996) [3-4] 107-112
    • (1996) J. of Nondestruct. Eval. , vol.15 , Issue.3-4 , pp. 107-112
    • Routbort, J.L.1
  • 16
    • 0030512296 scopus 로고    scopus 로고
    • Tribological performance evaluation of tungsten carbide-based cermets and development of a fracture mechanics wear model
    • R. B. Bhagat, J. C. Conway, M. F. Amateau, R. A. Brezler III: Tribological Performance Evaluation of Tungsten Carbide-Based Cermets and Development of a Fracture Mechanics Wear Model. Wear 201 (1996) 233-243
    • (1996) Wear , vol.201 , pp. 233-243
    • Bhagat, R.B.1    Conway, J.C.2    Amateau, M.F.3    Brezler R.A. III4
  • 17
    • 0024027466 scopus 로고
    • Surface damage of structural ceramics: Implications for wear modeling
    • O. O. Ajayi, K. C. Ludema: Surface Damage of Structural Ceramics: Implications for Wear Modeling. Wear 124 (1988) 237-257
    • (1988) Wear , vol.124 , pp. 237-257
    • Ajayi, O.O.1    Ludema, K.C.2
  • 19
    • 0002290996 scopus 로고    scopus 로고
    • Friction, wear and microfracture of polycrystalline aluminas
    • G. Nicoletto, L. Esposito, A. Tucci: Friction, Wear and Microfracture of Polycrystalline Aluminas. Ceram. Acta 9 (1997) [4] 13-19
    • (1997) Ceram. Acta , vol.9 , Issue.4 , pp. 13-19
    • Nicoletto, G.1    Esposito, L.2    Tucci, A.3
  • 22
    • 84979434138 scopus 로고
    • Hardness, toughness and brittleness: An indentation analysis
    • B. R. Lawn, D. B. Marshall: Hardness, Toughness and Brittleness: An Indentation Analysis. J. Amer. Ceram. Soc. 62 (1979) [7-8] 347-350
    • (1979) J. Amer. Ceram. Soc. , vol.62 , Issue.7-8 , pp. 347-350
    • Lawn, B.R.1    Marshall, D.B.2
  • 23
    • 0021377366 scopus 로고
    • Effect of brittleness index and sliding speed on the morphology of surface scratching in abrasive or erosive processes
    • B. Lamy: Effect of Brittleness Index and Sliding Speed on the Morphology of Surface Scratching in Abrasive or Erosive Processes. Tribology Int. 17 (1984) 35-38
    • (1984) Tribology Int. , vol.17 , pp. 35-38
    • Lamy, B.1
  • 24
    • 4243866846 scopus 로고
    • A critical re-evaluation of the abrasive wear of brittle solids
    • A. J. Carr: A Critical Re-Evaluation of the Abrasive Wear of Brittle Solids. Key Eng. Mats. 86-87 (1993) 301-306
    • (1993) Key Eng. Mats. , vol.86-87 , pp. 301-306
    • Carr, A.J.1
  • 25
    • 0031207278 scopus 로고    scopus 로고
    • Indentation brittleness of ceramics: A fresh approach
    • J. B. Quinn, G. D. Quinn: Indentation Brittleness of Ceramics: a Fresh Approach. J. Mat Sci. 32 (1997) 4331-4346
    • (1997) J. Mat Sci. , vol.32 , pp. 4331-4346
    • Quinn, J.B.1    Quinn, G.D.2
  • 27
    • 0030196150 scopus 로고    scopus 로고
    • Assessment of brittleness in glassceramics and particulate glass matrix composites by indentation data
    • A. R. Boccaccini: Assessment of Brittleness in Glassceramics and Particulate Glass Matrix Composites by Indentation Data. J. Mat. Sci. Lett. 15 (1996) 1119-1121
    • (1996) J. Mat. Sci. Lett. , vol.15 , pp. 1119-1121
    • Boccaccini, A.R.1
  • 28
    • 0026824385 scopus 로고
    • Devitrification cupola slag for use in abrasive products
    • G. Agarwal and R. F. Speyer: Devitrification Cupola Slag for Use in Abrasive Products. JOM 44 (1992) [3] 32-37
    • (1992) JOM , vol.44 , Issue.3 , pp. 32-37
    • Agarwal, G.1    Speyer, R.F.2
  • 29
    • 0031099529 scopus 로고    scopus 로고
    • Machinability and brittleness of glass-ceramics
    • A. R. Boccaccini, Machinability and Brittleness of Glass-ceramics. J. Mat. Process. Technol. 6S (1997) 302-304
    • (1997) J. Mat. Process. Technol. , vol.6 S , pp. 302-304
    • Boccaccini, A.R.1
  • 30
    • 0029289705 scopus 로고
    • A comparative evaluation method of machinability for mica-based glass-ceramics
    • D. S. Baik, K. S. No, J. S. Chun, Y. J. Yoon, H. Y. Cho: A comparative evaluation method of machinability for mica-based glass-ceramics. J. Mat. Sci. 30 (1995) 1801-1806
    • (1995) J. Mat. Sci. , vol.30 , pp. 1801-1806
    • Baik, D.S.1    No, K.S.2    Chun, J.S.3    Yoon, Y.J.4    Cho, H.Y.5
  • 31
    • 0022787348 scopus 로고
    • Erosive wear of polymer surfaces by steel ball blasting
    • K. Friedrich: Erosive Wear of Polymer Surfaces by Steel Ball Blasting. J. Mat. Sci. 21 (1986) 3317-3332
    • (1986) J. Mat. Sci. , vol.21 , pp. 3317-3332
    • Friedrich, K.1
  • 33
    • 0029328964 scopus 로고
    • The effects of angle of impact and material properties on the erosion rates of ceramics
    • R. G. Wellman, C. Allen: The Effects of Angle of Impact and Material Properties on the Erosion Rates of Ceramics. Wear 186-187 (1995) 117-122
    • (1995) Wear , vol.186-187 , pp. 117-122
    • Wellman, R.G.1    Allen, C.2
  • 36
    • 0029218445 scopus 로고
    • Effect of microstructure on abrasive machining of advanced ceramics
    • H. H. K. Xu, S. Jahanmir: Effect of Microstructure on Abrasive Machining of Advanced Ceramics. Ceram. Eng. Sci. Proc. 16 (1995) [1] 295-314.
    • (1995) Ceram. Eng. Sci. Proc. , vol.16 , Issue.1 , pp. 295-314
    • Xu, H.H.K.1    Jahanmir, S.2
  • 37
    • 0026106843 scopus 로고
    • R-curve effects in the solid particle erosion of ceramics
    • S. Srinivasam, R. O. Scattergood: R-curve Effects in the Solid Particle Erosion of Ceramics. Wear 142 (1991) 116-133
    • (1991) Wear , vol.142 , pp. 116-133
    • Srinivasam, S.1    Scattergood, R.O.2
  • 38
    • 0029388777 scopus 로고
    • Machining of steel with sialon ceramics: Influence of ceramic and workpiece composition on tool wear
    • J. Vleugels, P. Jacobs, J. P. Kruth, P. Vanherck, W. Du Mong, O. Van Der Biest: Machining of Steel with Sialon Ceramics: Influence of Ceramic and Workpiece Composition on Tool Wear. Wear 189 (1995) 32-44
    • (1995) Wear , vol.189 , pp. 32-44
    • Vleugels, J.1    Jacobs, P.2    Kruth, J.P.3    Vanherck, P.4    Du Mong, W.5    Van Der Biest, O.6


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.