메뉴 건너뛰기




Volumn 159, Issue 3-4, 1998, Pages 291-328

Numerical modelling of large deformation in metal powder forming

Author keywords

[No Author keywords available]

Indexed keywords

COMPACTION; CUTTING TOOLS; DEFORMATION; DIES; ELASTOPLASTICITY; FINITE ELEMENT METHOD; FLANGES; INTERFACES (MATERIALS); MATHEMATICAL MODELS; POWDER METALS; STRESS ANALYSIS; TIME DOMAIN ANALYSIS;

EID: 0032496860     PISSN: 00457825     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0045-7825(97)00276-4     Document Type: Article
Times cited : (66)

References (41)
  • 1
    • 0015603736 scopus 로고
    • A new approach to the finite element formulation and solution of a class of problems in coupled thermo-elastoviscoplasticity of solids
    • [1] J.T. Oden, D.R. Bhandari, G. Yagewa and J.T. Chung, A new approach to the finite element formulation and solution of a class of problems in coupled thermo-elastoviscoplasticity of solids, Nucl. Engrg. Des. 24 (1973) 240.
    • (1973) Nucl. Engrg. Des. , vol.24 , pp. 240
    • Oden, J.T.1    Bhandari, D.R.2    Yagewa, G.3    Chung, J.T.4
  • 2
    • 0015994413 scopus 로고
    • Flow of plastic and viscoplastic solids with special reference to extrusion and forming processes
    • [2] O.C. Zienkiewicz and P.N. Godbole, Flow of plastic and viscoplastic solids with special reference to extrusion and forming processes, Int. J. Numer. Methods Engrg. 8 (1974) 3-16.
    • (1974) Int. J. Numer. Methods Engrg. , vol.8 , pp. 3-16
    • Zienkiewicz, O.C.1    Godbole, P.N.2
  • 4
    • 0019625184 scopus 로고
    • A general formulation for coupled thermal flow of metals using finite elements
    • [4] O.C. Zienkiewicz, E. Onate and J.C. Heinrich, A general formulation for coupled thermal flow of metals using finite elements, Int. J. Numer. Methods Engrg. 17 (1981) 1497-1514.
    • (1981) Int. J. Numer. Methods Engrg. , vol.17 , pp. 1497-1514
    • Zienkiewicz, O.C.1    Onate, E.2    Heinrich, J.C.3
  • 5
    • 0025556915 scopus 로고
    • Adaptive FEM computation of forming processes, aplication to porous and non-porous materials
    • [5] O.C. Zienkiewicz, G.C. Huang and Y.C. Liu, Adaptive FEM computation of forming processes, Aplication to porous and non-porous materials, Int. J. Numer. Methods Engrg. 30 (1990) 1527-1553.
    • (1990) Int. J. Numer. Methods Engrg. , vol.30 , pp. 1527-1553
    • Zienkiewicz, O.C.1    Huang, G.C.2    Liu, Y.C.3
  • 6
    • 4243472509 scopus 로고
    • Mechanical behaviour of powders during compaction in a mould with variable cross sections
    • [6] Y. Morimoto, T. Hayashi and T. Taikei, Mechanical behaviour of powders during compaction in a mould with variable cross sections, Int. J. Powder Metall. 18 (1982) 129-145.
    • (1982) Int. J. Powder Metall. , vol.18 , pp. 129-145
    • Morimoto, Y.1    Hayashi, T.2    Taikei, T.3
  • 7
    • 0024137887 scopus 로고
    • A unified inelastic constitutive theory for sintered powder metals
    • [7] S.F. Duffy, A unified inelastic constitutive theory for sintered powder metals, Mech. Mater. 7 (1988) 245-254.
    • (1988) Mech. Mater. , vol.7 , pp. 245-254
    • Duffy, S.F.1
  • 9
    • 0026402989 scopus 로고
    • Finite element simulation of powder compaction via the flow formulation
    • L.F. Pearl, et al., eds., MPIF/APMI, Princeton, NJ
    • [9] A.G.K. Jinka, R.W. Lewis and D.T. Gethin, Finite element simulation of powder compaction via the flow formulation, in: L.F. Pearl, et al., eds., Advances in Powder Metallurgy (MPIF/APMI, Princeton, NJ, 1991).
    • (1991) Advances in Powder Metallurgy
    • Jinka, A.G.K.1    Lewis, R.W.2    Gethin, D.T.3
  • 10
    • 0001493696 scopus 로고
    • Computer aided simulation of metal powder die compaction process
    • [10] R.W. Lewis, A.G.K. Jinka and D.T. Gethin, Computer aided simulation of metal powder die compaction process, Powder Metall. Int. 25 (1993) 287-293.
    • (1993) Powder Metall. Int. , vol.25 , pp. 287-293
    • Lewis, R.W.1    Jinka, A.G.K.2    Gethin, D.T.3
  • 11
    • 0024168538 scopus 로고
    • A constitutive model for the compaction of metal powders
    • [11] S.B. Brown and G.G.A. Weber, A constitutive model for the compaction of metal powders, Modern Develop. Powder Metall. 18 (1988) 465-476.
    • (1988) Modern Develop. Powder Metall. , vol.18 , pp. 465-476
    • Brown, S.B.1    Weber, G.G.A.2
  • 12
    • 0027797785 scopus 로고
    • Numerical modelling of powder compaction processes: Displacement based finite element method
    • [12] D.V. Tran, R.W. Lewis, D.T. Gethin and A.K. Ariffin, Numerical modelling of powder compaction processes: Displacement based finite element method, Powder Metall. 36 (1993) 257-266.
    • (1993) Powder Metall. , vol.36 , pp. 257-266
    • Tran, D.V.1    Lewis, R.W.2    Gethin, D.T.3    Ariffin, A.K.4
  • 13
    • 0001204747 scopus 로고
    • Finite element approach to problems in particulate media with special reference to powder metal forming
    • [13] R.W. Lewis and D.V. Tran, Finite element approach to problems in particulate media with special reference to powder metal forming, Bull. Tech. Univ. Istanbul, 47 (1994) 295-310.
    • (1994) Bull. Tech. Univ. Istanbul , vol.47 , pp. 295-310
    • Lewis, R.W.1    Tran, D.V.2
  • 14
    • 0029422972 scopus 로고
    • Modelling compaction and ejection processes in the generation of green powder compacts
    • ADM-216, San Francisco
    • [14] D.T. Gethin, R.W. Lewis and A.K. Ariffin, Modelling compaction and ejection processes in the generation of green powder compacts, ASME Int. Mech. Engrg. Congress and Exposition (ADM-216, San Francisco 1995, 27-45).
    • (1995) ASME Int. Mech. Engrg. Congress and Exposition , pp. 27-45
    • Gethin, D.T.1    Lewis, R.W.2    Ariffin, A.K.3
  • 15
    • 0001472311 scopus 로고    scopus 로고
    • Finite element modelling of large elasto-plastic deformation for the dynamic analysis of powder compaction processes
    • D.R.J. Oden et al., eds., CIMNE, Barcelona
    • [15] A.R. Khoei and R.W. Lewis, Finite element modelling of large elasto-plastic deformation for the dynamic analysis of powder compaction processes, in: D.R.J. Oden et al., eds., Computational Plasticity: Fundamentals and Applications (CIMNE, Barcelona, 1997) 1329-1344.
    • (1997) Computational Plasticity: Fundamentals and Applications , pp. 1329-1344
    • Khoei, A.R.1    Lewis, R.W.2
  • 18
    • 0018035425 scopus 로고
    • Constitutive equation for plastic deformation of porous materials
    • [18] Y. Corapcioglu and T. Uz, Constitutive equation for plastic deformation of porous materials, Powder Tech. 21 (1978) 269-274.
    • (1978) Powder Tech. , vol.21 , pp. 269-274
    • Corapcioglu, Y.1    Uz, T.2
  • 19
    • 0003247716 scopus 로고
    • A yield criterion of porous material with anisotropy caused by geometry or distribution of pores
    • [19] T. Hisatsune, T. Tabata and S. Masaki, A yield criterion of porous material with anisotropy caused by geometry or distribution of pores, J. Engrg. Mat. Tech. Trans., ASME 113 (1991) 425-429.
    • (1991) J. Engrg. Mat. Tech. Trans., ASME , vol.113 , pp. 425-429
    • Hisatsune, T.1    Tabata, T.2    Masaki, S.3
  • 20
    • 0040190998 scopus 로고
    • Rheological characterization of metal powder following various loading paths
    • [20] P. Mosbah, D. Bouvard, J. Lauiear and E. Oue, Rheological Characterization of metal powder following various loading paths, Powder Metall. World Congress, Paris 1 (1994) 677-680.
    • (1994) Powder Metall. World Congress, Paris , vol.1 , pp. 677-680
    • Mosbah, P.1    Bouvard, D.2    Lauiear, J.3    Oue, E.4
  • 21
    • 0020874325 scopus 로고
    • Constitutive equations and their role in the modelling of the cold pressing process
    • [21] J.E. Crawford and P. Lindskog, Constitutive equations and their role in the modelling of the cold pressing process, Scand. J. Metall. 12 (1983) 277-281.
    • (1983) Scand. J. Metall. , vol.12 , pp. 277-281
    • Crawford, J.E.1    Lindskog, P.2
  • 22
    • 0026205673 scopus 로고
    • Constitutive models for powder material
    • [22] H.A. Haggblad, Constitutive models for powder material, Powder Tech. 76 (1991) 127-136.
    • (1991) Powder Tech. , vol.76 , pp. 127-136
    • Haggblad, H.A.1
  • 23
    • 0001756685 scopus 로고
    • Modelling of cold compaction process of metal powders
    • [23] M.D. Riero and J.M. Prado, Modelling of cold compaction process of metal powders, Powder Metall. World Congress, Paris 1 (1994) 685-688.
    • (1994) Powder Metall. World Congress, Paris , vol.1 , pp. 685-688
    • Riero, M.D.1    Prado, J.M.2
  • 24
    • 0015483413 scopus 로고
    • On uniqueness in ideally elasto-plastic problems in case of non-associated flow rules
    • [24] H.H. Bleich, On uniqueness in ideally elasto-plastic problems in case of non-associated flow rules, J. Appl. Mech. Trans., ASME (1972) 983-987.
    • (1972) J. Appl. Mech. Trans., ASME , pp. 983-987
    • Bleich, H.H.1
  • 25
    • 0040870199 scopus 로고
    • A yield criterion for plastic, factional, work-hardening granular materials
    • [25] N.P. Suh, A yield criterion for plastic, factional, work-hardening granular materials, Int. J. Powder Metall. 5 (1969) 69-77.
    • (1969) Int. J. Powder Metall. , vol.5 , pp. 69-77
    • Suh, N.P.1
  • 31
    • 0023965581 scopus 로고
    • An assessment of the cap model: Consistent return algorithms and rate-dependent extensions
    • [31] J.C. Simo, J.W. Ju, K.S. Pister and R.L. Taylor, An assessment of the cap model: consistent return algorithms and rate-dependent extensions, J. Engrg. Mech. Div., ASCE 114 (1988) 191-218.
    • (1988) J. Engrg. Mech. Div., ASCE , vol.114 , pp. 191-218
    • Simo, J.C.1    Ju, J.W.2    Pister, K.S.3    Taylor, R.L.4
  • 32
    • 0027147378 scopus 로고
    • A modified cap model: Closest point solution algorithms
    • [32] G. Hofstetter, J.C. Simo and R.L. Taylor, A modified cap model: closest point solution algorithms, Int. J. Comput. Struc. 46 (1993) 203-214.
    • (1993) Int. J. Comput. Struc. , vol.46 , pp. 203-214
    • Hofstetter, G.1    Simo, J.C.2    Taylor, R.L.3
  • 34
    • 0001246936 scopus 로고
    • Models and computational methods for dynamic friction phenomena
    • [34] J.T. Oden and J.A.C, Martins, Models and computational methods for dynamic friction phenomena, Comput. Methods. Appl. Mech. Engrg. 52 (1985) 527-634.
    • (1985) Comput. Methods. Appl. Mech. Engrg. , vol.52 , pp. 527-634
    • Oden, J.T.1    Martins, J.A.C.2
  • 35
    • 0002048502 scopus 로고
    • A plasticity theory of friction and joint elements
    • D.R.J. Owen et al. eds, Pineridge Press, Swansea
    • [35] T. Rodic and D.R.J. Owen, A plasticity theory of friction and joint elements, in: D.R.J. Owen et al. eds, Computational Plasticity II: Models, Software and Applications (Pineridge Press, Swansea, 1989) 1043-1062.
    • (1989) Computational Plasticity II: Models, Software and Applications , pp. 1043-1062
    • Rodic, T.1    Owen, D.R.J.2
  • 37
    • 0022043061 scopus 로고
    • An isoparametric joint/interface element for finite element analysis
    • [37] G. Beer, An isoparametric joint/interface element for finite element analysis, Int. J. Numer. Methods Engrg. 21 (1985) 585-600.
    • (1985) Int. J. Numer. Methods Engrg. , vol.21 , pp. 585-600
    • Beer, G.1
  • 39
    • 0028406080 scopus 로고
    • The application of interface elements and enriched or rate-dependent continua to micro-mechanical analyses of fracture in composites
    • [39] J.C.J. Schellekens and R. de Borst, The application of interface elements and enriched or rate-dependent continua to micro-mechanical analyses of fracture in composites, Comput. Mech. 14 (1994) 68-83.
    • (1994) Comput. Mech. , vol.14 , pp. 68-83
    • Schellekens, J.C.J.1    De Borst, R.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.