Particulate fouling of corrugated plate heat exchangers. Global kinetic and equilibrium studies

Chemical Engineering Science

Volumn 53, Issue 17, 1998, Pages 3050-3071

  Grandgeorge, S ^a   Jallut, C ^a   Thonon, B ^a,b  

^a CEA GRENOBLE   (France)

^b UNIVERSITÉ LYON 1   (France)

Author keywords

Fouling; Kinetic; Liquid phase; Particulate

Indexed keywords

CORRUGATED METAL; FOULING; HEAT RESISTANCE; KINETIC THEORY; MATHEMATICAL MODELS; PARTICLES (PARTICULATE MATTER); STAINLESS STEEL; TITANIUM DIOXIDE;

CORRUGATED PLATE HEAT EXCHANGERS;

HEAT EXCHANGERS;

FOULING; HEAT EXCHANGER; LIQUID; TITANIUM DIOXIDE;

EID: 0032483588     PISSN: 00092509     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0009-2509(98)00128-6     Document Type: Article

References (64)

1. Adomeit, Ph. and Renz, U. (1994) Deposition of fine particles from aqueous suspension, Heat Transfer. Proceedings of the 10th International Heat Transfer Conference, Brighton UK, Vol. 5, pp. 207-212.
2. Adomeit, Ph. and Renz, U. (1996) Deposition of fine particles from a turbulent liquid flow: experiments and numerical predictions. Chem. Engng Sci. 51(13), 3491-3503.
3. Beai, S. K. (1970) Deposition of particles in turbulent flow on channel or pipe walls. Nucl. Sci. Engng. 40, 1-11.
4. Bacchin, P., Aimar, P. and Sanchez, V. (1995) Model for colloïdal fouling of membranes, A.I.Ch.E. J. 41(2), 368-376.
5. Bossan, D., Grillot J. M., Thonon, B. and Grandgeorge S. (1995) Experimental study of particulate fouling in an industrial plate heat exchanger. J. Enhanced Heat Transfer 2(1-2), 167-175.
6. Bott, T. R. (1995) Fouling of Heat Exchangers. Elsevier, Amsterdam.
7. Bowen, B. D., Levine S. and Epstein, N. (1976) Fine particle deposition in laminar flow through parallel-plate and cylindrical channels. J. Colloïd Interface Sci. 54(3), 375-390.
8. Bowen, B. D. and Epstein, N. (1979) Fine particle deposition in smooth parallel-plate channels. J. Colloïd Interface Sci. 72(1), 81-97.
9. Chamra, L. M. and Webb, R. L. (1993) Effect of particle size and size distribution on particulate fouling in enhanced tubes. Enhanced Heat Transfer 1(1), 65-75.
10. Chiang, H. W. and Tien, C. (1982) Deposition of brownian particles in packed beds. Chem. Engng Sci. 37(8), 1159-1171.
11. Cleaver J. W. and Yates B. (1973) Mechanism of detachment of colloidal particles from a flat substrate in a turbulent flow. J. Colloïd Interface Sci. 44(3), 464-474.
12. Cleaver, J. W. and Yates B. (1975) A sub layer model for the deposition of particles from a turbulent flow. Chem. Engng Sci. 30, 983-992.
13. Cleaver, J. W. and Yates, B. (1976) The effect of re-entrainment on particle deposition. Chem. Engng Sci. 31, 147-151.
14. Davies, C. N. (1966) Deposition of aerosols from turbulent flow through pipes. Proc. Roy. Soc. London A 289(1417), 235-246.
15. Davies, J. T. (1983) A new theory of aerosol deposition from turbulent fluids. Chem. Engng Sci. 38(1), 135-139.
16. Danckwerts, P. V. (1951) The significance of liquidfilm coefficients in gas absorption. Ind. Engng Chem. 43(6), 1460-1467.
17. Danckwerts, P. V. (1970) Gas-Liquid Reactions. McGraw-Hill, New York, U.S.A.
18. Epstein, N. (1993) The Velocity Effect on Initial Fouling Rate. Israel Chemical Engineering, April, pp. 32-37.
19. Epstein, N. (1994) A model of the initial chemical reaction fouling rate for flow within a heated tube, and its verification. In: Proceedings of the 10th International Heat Transfer Conference, Vol. 4, ed. G. F. Hewitt, Brighton, U.K. pp. 225-229
20. Epstein, N. (1997) Particles deposition and its mitigation. Proceedings of the Engineering Foundation Conference: Understanding Heat Exchanger Fouling and its Mitigation, Lucca, Italy, 11-16 May 1997.
21. Fichman, M., Gutfinger, C. and Pnueli, D. (1988) A model for turbulent deposition of aerosols. J. Aerosol Sci. 19(1), 123-136.
22. Fortuin, J. M. H., Musschenga, E. E. and Hamersma, P. J. (1992) Transfer processes in turbulent pipe flow described by the ERSR model. A.I.Ch.E. J. 38(3), 343-362.
23. Freeman, W. B., Middis, J. and Müller-Steinhagen, H. (1990) Influence of augmented surfaces and of surface finish on particulate fouling in double pipe heat exchangers. Chem. Engng Process. 27, 1-11.
24. Friedlander, S. K. and Johnstone, H. F. (1957) Deposition of suspended particles from turbulent gas streams. Ind. Engng Chem. 49(7), 1151-1156.
25. Grandgeorge, S. (1996) Contribution a l'á;tude de l'encrassement particulaire des á;changeurs a plaques corruguá;es en milieu liquide. Ph.D. thesis, Institut National Polytechnique de Grenoble.
26. Hubbe, M. A. (1985) Detachment of colloidal hydrous oxide spheres from flat solids exposed to flow. 1. Experimental system. 2. Mechanism of release. Colloids Surfaces 16, 227-270.
27. Kallay, N., Nelligan, D. J. and Matijevic, E. (1983) Particle adhesion and removal in model systems 6: Kinetics of deposition of haematite particles on steel. J. Chem. Soc. Faraday Trans. 1(79), 65-74.
28. Kallay, N. and Matijevic, E. (1981) Particle adhesion and removal in model systems IV. Kinetics of detachment of haematite particles from steel. J. Colloïd Interface Sci. 83(1), 289-300.
29. Kern, D. Q. and Seaton, R. E. (1959) A theoretical analysis of thermal surface fouling. Brit. Chem. Engng 4(5), 258-262.
30. Kim, N. H. and Webb, R. L. (1990) Particulate fouling inside tubes having arc-shaped two-dimensional roughness by a flowing suspension of aluminium oxyde in water. 9th International Heat Transfer Conference, pp. 139-144.
31. Kim, N. H. and Webb, R. L. (1991) Particulate fouling of water in tubes having a two-dimensional roughness geometry. Int. J. Heat Mass Transfer 34(11), 2727-2738.
32. Kuo, R. J. and Matijevic, E. (1980) Particle adhesion and removal in model systems III: Mono dispersed ferric oxyde on steel. J. Colloïd Interface Sci. 78(2), 407-421.
33. Mandralis, Z. I., Wernet, J. H. and Feke D. L. (1996) Effects of double-layer relaxation on the interaction of colloïdal particles approaching at constant speed. J. Colloïd Interface Sci. 182, 26-30.
34. Matijevic, E., Kuo, R. J. and Kolny, H. (1981) Stability and deposition phenomena of monodispersed hematite sols. J. Colloïd Interface Sci. 80(1), 94-106.
35. Melo, L. F. and Pinheiro, J. D. (1988a) Transport in fouling caused by kaolin-water suspensions on copper tubes. The Can. J. Chem. Engng 66, 36-41.
36. Melo, L. F. and Pinheiro J. D. (1988b) Fouling by aqueous suspensions of kaolin and magnetite: hydrodynamic and surface phenomena effects. In Fouling Science and Technology, eds, L. F. Melo et al, pp. 173-189. Kluwer Academic Publishers.
37. Mercier, P. (1996) In: Liquid side fouling of compact heat exchangers. EEC Final Report, Joule contract JOU2-CT92-0033.
38. Metzner, A. B. and Friend, W. L. (1958) Theoretical analogies between heat, mass and momentum transfer and modifications for fluids of high Prandtl or Schmidt numbers. The Can. J. Chem. Engng, December, 235-240.
39. Müller-Steinhagen, H. and Middis, J. (1989) Particulate fouling in plate heat exchangers. Heat Transfer Engng 10(4), 30-36.
40. Müller-Steinhagen H. (1993) Fouling: the ultimate challenge for heat exchanger design. In Transport Phenomena in Thermal Engineering, pp. 811-823. Begell House Inc. Publishers.
41. Newson, I. H., Bott, T. R. and Hussain, C. I. (1983) Studies of magnetite deposition from a flowing suspension. Chem. Engng. Commun. 20, 335-353.
42. Newson, I. H., Miller, G. A., Haynes, J. W., Bott, T. R. and Williamson, R. D. (1988) Particulate fouling: studies of deposition, removal and sticking mechanisms in a haematite/water system. 2nd National Heat Transfer Conference, Glasgow, Institute of Mechanical Engineering, pp. 137-160.
43. Oliveira, D. R., Melo, L. and Pinheiro, J. D. (1988) Fouling by aqueous suspensions of kaolin and magnetite. 2nd National Heat Transfer Conference, Glasgow, Institue of Mechanical Engineering, pp. 161-172.
44. Overbeek, J. Th. G. (1977) Recent developments in the understanding of colloid stability. J. Colloid Interface Sci. 58(2), 408-422.
45. Papavergos, P. G. and Hedley, A. B. (1984) Particle deposition behaviour from turbulent flows. Chem. Engng Res. Des. 62, 275-295.
46. Patterson, W. R. and Fryer, P. J. (1988) A reaction engineering approach to the analysis of fouling. Chem. Engng Sci. 43(7), 1714-1717.
47. Privman, V., Frisch, H. L., Ryde, N. and Matijevic, E. (1991) Particle adhesion in model systems. 13.- Theory of multilayer deposition, J. Chem. Soc. Faraday Trans. 87, 1371-1375.
48. Ruckenstein, E. and Prieve, D. C. (1973) Rate of deposition of Brownian particles under the action of London and double-layer forces. J. Chem. Soc. Faraday II, 69, 1522-1536.
49. Sharma, M. M., Chamoun, H., Sita Rama Sarma, D. S. H. and Schechter, R. S. (1992) Factors controlling the hydrodynamics detachment of particles from surfaces. J. Colloid Interface Sci. 149(1), 121-134.
50. Somerscales, E. F. C., Ponteduro, A. F. and Bergles, A. E. (1991) Particulate fouling of heat transfer tubes enhanced on their inner surface, HTD-vol 164, Fouling and Enhancement Interactions, ASME, pp. 17-28, New York, U.S.A.
51. Spielman, L. A. and Fried lander, S. K. (1974) Role of the electrical double layer in particle deposition by convective diffusion. J. Colloïd Interface Sci. 46(1), 22-31.
52. Taborek, J., Aoki, T., Ritter, R. B., Palen, J. W. and Knusen, J. G. (1972a) Fouling: the major unresolved problem in heat transfer. Chem. Engng. Progr. 68(2), 59-67.
53. Taborek, J., Aoki, T., Ritter, R. B., Palen, J. W. and Knusen, J. G. (1972b) Predictive methods for fouling behavior. Chem. Engng. Progr. 68(7), 69-78.
54. Thomas, D. and Grigull, U. (1974) Experimentelle Untersuchung über die ablagerung von suspendiertem magnetit bei rohrströmungen in dampferzeugern. Brennst.-Wärme-Kraft, 26(3), 109-115.
55. Thompson, G., Kallay, N. and Matijevic, E. (1984) Particle adhesion and removal in model systems IX: detachment of rod-like β-FeOOH particles from steel, Chem. Engng Sci. 39(7/8), 1271-1276.
56. Thonon, B. and Grillot, J. M. (1997) Fouling mitigation in plate heat exchanger by a proper design, Proceedings of the Engineering Foundation Conference: Understanding Heat Exchanger Fouling and its Mitigation, Lucca, Italy, 11-16 May 1997.
57. Turner, C. W. (1993) Rates of particle deposition from aqueous suspensions in turbulent flow: a comparison of theory with experiment. Chem. Engng Sci. 48(12), 2189-2195.
58. Van den Tempel M. (1972) Interaction forces between condensed bodies in contact. Adv. Colloïd Interface Sci. 3, 137-159.
59. Vasak, F., Bowen, B. D., Chen, C. Y., Kastanek F. and Epstein, N. (1995) Fine particle deposition in laminar and turbulent flows. The Can. J. Chem. Engng 73, 785-792.
60. Vasak, F. and Epstein, N. (1996) Regression analysis of a chemical reaction fouling model. The Can. J. Chem. Engng 74, 173-175.
61. Visser, J. (1988) Adhesion and removal of particles, I and II, In Fouling Science and Technology, eds L. F. Melo et al, pp. 87-123. Kluwer Academic Publishers, Dordrecht.
62. Williamson, R., Newson, I. and Bott, T. R. (1988) The deposition of haematite particles from flowing water. The Can. J. Chem. Engng 66, 51-54.
63. Yiantsos, S. G. and Karabelas, A. J. (1995) Detachment of spherical microparticles adhering on flat surfaces by hydrodynamic forces. J. Colloid Interface Sci. 176, 74-85.
64. Yung, B. P. K., Merry, H. and Bott, T. R. (1989) The role of turbulent burts in particle re-entrainment in aqueous systems. Chem. Engng Sci. 44(4), 873-882.