Thermodynamic model for MnO-containing slags and gas-slag-metal equilibrium in ferromanganese smelting

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 29, Issue 6, 1998, Pages 1181-1191

  Hongjie, L I ^a   Morris, Arthur E ^a   Robertson, David G C ^a  

^a MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

GASES; MANGANESE ALLOYS; MATHEMATICAL MODELS; METALS; SLAGS; SMELTING; THERMODYNAMIC PROPERTIES;

FERROMANGANESES;

IRON ALLOYS;

EID: 0032318283     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-998-0040-z     Document Type: Article

References (80)

1. C. Wagner: Thermodynamics of Alloys, Addison-Wesley, Cambridge, MA, 1952.
2. C.H.P. Lupis and J.F. Elliott: Acta Metall, 1966, vol. 14, pp. 529-38.
3. C.H.P. Lupis: Chemical Thermodynamics of Materials, Elsevier, New York, NY, 1983.
4. A.D. Pelton and C.W. Baie: Metall. Trans. A, 1986, vol. 17A, pp. 1211-15.
5. C.W. Bale and A.D. Pelton: Metall. Trans. A, 1990, vol. 21A, pp. 1997-2002.
6. L.S. Darken: Trans. TMS-AIME, 1967, vol. 239, pp. 90-96.
7. M. Margules: Sitzungsber Wiend Akad., 1895, vol. 104, p. 1243.
8. J.H. Hildebrand: Proc. Nat. Acad. Sei., 1929, vol. 13, p. 267;
9. J. Am. Chem. Soc., 1929, vol. 51, p. 66.
10. A.S. Jordan: Calculation of Phase Diagrams and Thermochemistry of Alloy Phases, TMS-AIME, Warrendale, PA, 1979, pp. 100-29.
11. S. Ban-ya: Proc. 4th Int. Conf. on Molten Slags and Fluxes, ISIJ, Sendai, Japan, 1992, pp. 8-13.
12. B. Bjorkman: Scand. J. Metall., 1986, vol. 15, pp. 191-98.
13. E.R. Plante, D.W. Bonnell, and J.W. Hastie: Advances in the Fusion of Glass, American Ceramic Society, Westerville, OH, 1988, pp. 26.1-26.18.
14. H.H. Kellogg, Y.H. Kim, T. Stapurewicz, D. Verdonik, and G. Archer: Physical Chemistry of Extractive Metallurgy, AIME, Warrendale, PA, 1985, pp. 3-21.
15. K.C. Hsieh and Y.A. Chang: Can. Metall. Q., 1987, vol. 26, pp. 311-27.
16. R.C. Schmid: Metall. Trans. B, 1983, vol. 14B, pp. 473-81.
17. R.C. Sharma, J.C. Lin, and Y.A. Chang: Metall. Trans. B, 1987, vol. 18B, pp. 237-44.
18. M. Hillert, B. Jansson, B. Sundman, and J. Agren: Metall. Trans. A, 1985, vol. 16A, pp. 261-66.
19. M. Hillert, B. Jansson, and B. Sundman: Metall. Trans. B, 1990, vol. 21 B, pp. 404-06.
20. M. Hillert, B. Sundman, and X. Wang: Metall. Trans. B, 1990, vol. 21B, pp. 303-12.
21. G.W. Toop and C.S. Samis: Trans. TMS-AIME, 1962, vol. 224, pp. 878-87.
22. C.R. Masson: Proc. R. Soc., 1965, vol. A287, pp. 201-21.
23. S.G. Whiteway, I.E. Smith, and C.R. Masson: Can. J. Chem., 1970, vol. 48, pp. 33-45.
24. S.G. Whiteway, I.B. Smith, and C.R. Masson: Can. J. Chem., 1970, vol. 48, pp. 1456-64.
25. D.R. Gaskell: Can. Metall. Q., 1981, vol. 20, pp. 3-19.
26. E.A. Guggenheim: Proc. R. Soc., 1935, vol. A148, p. 304-12.
27. R.H. Fowler and E.A. Guggenheim: Statistical Thermodynamics, Cambridge University Press, Cambridge, United Kingdom, 1939, pp. 350-66.
28. A.D. Pelton and M. Blander: Metall. Trans. B, 1986, vol. 17B, pp. 805-15.
29. M. Blander and A.D. Pelton: Geochim. Cosmochim. Acta, 1987, vol. 51, pp. 85-95.
30. A.D. Pelton and M. Blander: CALPHAD, 1988, vol. 12, pp. 97-108.
31. P. Wu, G. Eriksson, A.D. Pelton, and M. Blander: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 26-35.
32. P. Wu, G. Eriksson, and A.D. Pelton: J. Am. Ceram. Soc., 1993, vol. 76, pp. 2059-64.
33. P. Wu, G. Eriksson, and A.D. Pelton: J. Am. Ceram. Soc., 1993, vol. 76, pp. 2065-75.
34. G. Eriksson, P. Wu, M. Blander, and A.D. Pelton: Can. Metall. Q., 1994, vol. 33, pp. 13-21.
35. M.L. Kapoor and M.G. Frohberg: Chem. Metall. Iron Steel, Iron and Steel Institute, London, 1973, pp. 17-25.
36. H. Gaye and J. Welfringer: Proc. 2nd Int. Symp. on Metallurgical Slags and Fluxes, IMS, Warrendale, PA, 1984, pp. 357-75.
37. H. Gaye, P.V. Riboud, and J. Welfringer: Ironmaking and Steelmaking, 1988, vol. 15, pp. 319-22.
38. H. Gaye, P.V. Riboud, and J. Welfringer: Process Technology Proc., Washington, DC, 1986, Iron and Steel Society, Warrendale, PA, 1986, vol. 6, pp. 631-39.
39. J. Lehmann and H. Gaye: Rev. Int. Hautes Temp. Refract., 1992-1993, vol. 28, pp. 81-90.
40. 5 and Cr Oxides," private communication, IRSID, France.
41. H. Gaye, J. Lehmann, T. Matsumiya, and W. Yamada: Proc. 4th Int. Conf. on Molten Slags and Fluxes, Iron and Steel Institute of Japan, Sendai, Japan, 1992, pp. 103-08.
42. Metsim: Proware, 4611 E. Blue Mountain Drive, Tucson, Arizona, AZ 85718.
43. H.-J. Li and A.B. Morris: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 553-62.
44. Plant Data from Elkem Metals Company, Marietta, OH, private communication, 1997.
45. W. Bale, A.D. Pelton, and W.T. Thompson: F*A*C*T Thermodynamic Computing System (Facility for the Analysis of Chemical Thennodynamics), CRCT, Ecole Polytechnique, Montreal, 1995.
46. P.T. Carter and T.G. Macfarlane: J. Iron Steel Inst. (London), 1957, vol. 185, pp. 54-66.
47. R.A. Sharma and F.D. Richardson: J. Iron Steel Inst. (London), 1962, vol. 200, pp. 373-79.
48. Y. Omori and K. Sanbongi: J. Met. Inst. Jpn., 1961, vol. 25, pp. 139-41.
49. F.D. Richardson: Phsical Chemicals of Metals, McGraw-Hill, New York, NY, 1953, pp 77-95.
50. F.C. Fulton and J. Chipman: Trans. TMS-AIME, 1954, vol. 200, pp. 136-46.
51. K. Sawamura: Tetsu-to-Hagane Overseas, 1962, vol. 2, pp. 219-25.
52. R.H. Rein and J. Chipman: Trans. TMS-AIME, 1965, vol. 233, pp. 415-22.
53. D.A.R. Kay and J. Taylor: Trans. Faraday Soc., 1960, vol. 56, pp. 1372-86.
54. K. Sanbongi and Y. Omori: Physical Chemistry of Metallic Solutions and Intermetallic Compounds, II, Her Majesties Stationery Office, London, 1959, pp. 373-79.
55. J. Chipman: Physical Chemistry of Process Metallurgy, Interscience Publications, New York, NY, 1961, p. 27.
56. R.A. Sharma and F.D. Richardson: J. Iron Steel Inst., 1961, vol. 198, pp. 386-90.
57. M. Rey: Physical Chemistry of Process Metallurgy, Gurney and Jackson, London, 1948, pp. 247-65.
58. L. Yang, C.L. McCabe, and R. Miller: in The Physical Chemistry of Steelmaking, J.F. Elliott, ed., MIT Press, Cambridge, MA, 1958, p. 63.
59. L.C. Chang and G. Derge: Trans. Am. Inst. Min. Metall. Eng., 1947, vol. 197, pp. 60-72.
60. K.P. Abraham, M.W. Davies, and F.D. Richardson: J. Iron Steel Inst., 1960, vol. 196, pp. 82-89.
61. S.R. Mehta and F.D. Richardson: J. Iron Steel Inst., 1965, vol. 203, pp. 524-28.
62. P.N. Smith and M.W. Davies: Trans. Inst. Min. Metall. Sect. C, 1971, vol. 80, pp. 87-95.
63. D.R. Gaskell: Metall. Trans., 1974, vol. 5, pp. 776-78.
64. B.K.D.P. Rao and D.R. Gaskell: Metall. Trans. B, 1981, vol. 12B, pp. 311-17.
65. N. Tiberg and A. Muan: Metall. Trans., 1970, vol. 1, pp. 435-39.
66. S. Raghavan, G.N.K. Iyengar, and K.P. Abraham: Trans. Ind. Inst. Met., 1980, vol. 3, p. 51.
67. T. Tsai and A. Muan: J. Am. Ceram. Soc., 1992, vol. 75, pp. 1472-75.
68. E.T. Turkdogan: J. Iron Steel Inst., 1956, vol. 192, pp. 74-79.
69. Slag Atlas, Verein Deutscher Eisenhuttenleute, ed., Verlag Stahleisen MBH, Dusseldorf, 1981, p. 132, Figure 50.
70. V.H. Schenck and F. Neumann: Arch Eisenhultenwes., 1960, vol. 31, p. 83.
71. E.W. Filer and L.S. Darken: Trans. AIME, 1952, vol. 194, pp. 253-57.
72. E.T. Turkdogan: Proc. Ethem. T. Turkdogan Symp., Iron and Steel Society, Warrendale, PA, 1994, pp. 253-69.
73. J.E. Stukel and J. Cocubinsky: TIME, 1954, vol. 200, p. 353.
74. R. Hurman Eric: University of the Witwatersrand, Johannesburg, South Africa, private communication, 1996.
75. J.M. Steiler: Conf. on Physico-Chimie et Siderurgie, Poster Session, Versailles, Oct. 1978.
76. E.T. Turkdogan: Physicochemical Properties of Molten Slags and Glasses, The Metals Society, London, 1983, p. 115.
77. "Monthly Operation Reports of Ferromanganese Smelting Furnace #12," Elkem Metals Company, Marietta, GA, private communication, 1996, 1997.
78. H.-J. Li, A.E. Morris, and D.G.C. Robertson: Proc. 54th Electric Furnace Conf., ISS, Warrendale, PA, 1996, pp. 227-35.
79. H.-J. Li and D.G.C. Robertson: Proc. 55th Electric Furnace Conf., ISS, Warrendale, PA, 1997, pp. 269-79.
80. V.O. Voskoboinikov, V.I. Varava, S.V. Brusenko, V.P. Osadskii, and N.I. Ovsyannikov: Stal', 1987, No. 11, pp. 53-55.