The inverse approach with simple triangular shell elements for large strain predictions of sheet metal forming parts

Engineering Computations (Swansea, Wales)

Volumn 15, Issue 6-7, 1998, Pages 864-892

  Batoz, Jean Louis ^a   Guo, Ying Qiao ^a   Mercier, Frederic ^a  

^a UNIVERSITÉ DE TECHNOLOGIE DE COMPIÈGNE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ALGORITHMS; BENDING (FORMING); ELASTOPLASTICITY; FINITE ELEMENT METHOD; SHELLS (STRUCTURES); STRAIN; ANISOTROPY; BOUNDARY CONDITIONS; COMPUTER AIDED DESIGN; COMPUTER AIDED ENGINEERING; COMPUTER AIDED MANUFACTURING; COMPUTER SIMULATION; COST EFFECTIVENESS; DEFORMATION; FORMING; FRACTURE; HARDENING; PLASTICITY; PRODUCT DEVELOPMENT; YIELD STRESS;

DISCRETE KIRCHHOFF CONSTRAINTS; TRIANGULAR SHELL ELEMENTS; ELASTOPLASTIC STRAINS; FLOOR SHOP LEVELS; FORMING TOOLS; WRINKLING;

METAL FORMING; SHEET METAL;

EID: 0032313026     PISSN: 02644401     EISSN: None     Source Type: Journal    
DOI: 10.1108/02644409810236894     Document Type: Article

References (56)

1. "Advanced technology and machinery in metal forming" (1992), Proc. of the Int. Conf. ATMMF'92, Huazhong University of Science and Technology Press, Wuhan.
2. "Advanced technology of plasticity" (1990), Proc. of the 4th Int. Conf on Tech. of Plasticity, Int. Acad. Publishers, Kyoto.
3. Altan, T. (Ed.) (1994), "Sheet metal forming technology 1994", Journal of Materials Processing Technology, Vol. 46 Nos 34, Elsevier, Barking.
4. Batoz, J.L. and Dhatt, G. (1992), Modélisation des Structures par Éléments Finis, Vol. 3, Coques, Hermès Editeur, Paris.
5. Batoz, J.L., Guo, Y.Q. and Detraux, J.M. (1990), "An inverse finite element procedure to estimate the large plastic strain in sheet metal forming", 3rd Int. Conf. on Technology of Plasticity, Kyoto, pp. 1403-8.
6. Batoz, J.L., Guo, Y.Q. and Mercier, F. (1995a), "The inverse approach including bending effects for the analysis and design of sheet metal forming parts", NUMIFORM 95, pp. 661-7.
7. Batoz, J.L., Guo, Y.Q. and Mercier, F. (1995b), "Accounting for bending effects in sheet metal forming using the inverse approach", COMPLAS IV, Part I, pp. 707-18.
8. Batoz, J.L., Duroux, P., Guo, Y.Q. and Detraux, J.M. (1989), "An efficient algorithm to estimate the large strains in deep drawing", NUMIFORM 89, pp. 383-8.
9. Batoz, J.L., Narainen, R., Duroux, P. and Guo, Y.Q. (1993), "Comparison of the implicit, explicit and inverse approaches for the estimation of the strain distribution in axisymmetrical thin sheets", 4th Conf. on the Technology of Plasticity, Beijing, pp. 1695-700.
10. Brunet, M. and Sabourin, F. (1993), "A simplified triangular shell element with necking criterion for 3D sheet forming analysis", NUMISHEET 93, pp. 229-38.
11. Brunet, M. and Sabourin, F. (1994), "Prediction of necking and wrinkles with a simplified triangular shell element in sheet forming", Proceedings on the Int. Conf on Metal Forming Process Simulation in Industry, Baden-Baden, Germany, 28-30 September, pp. 75-93.
12. Brunet, M., Arrieux, R. and Nguyen Nhat, T. (1995), "Necking prediction using forming limit stress surfaces in 3D sheet metal forming", NUMIFORM 95, pp. 669-74.
13. CETIM (1994), "Calculs en emboutissage. Applications industrielles pour la conception des pièces", Publications CETIM, Senlis.
14. Chateau, X. (1994), "A simplified approach for sheet forming processes design", Int J. Mech. Sci., Vol. 36 No. 6, pp. 579-97.
15. Chenot, J.L., Wood, R.D. and Zienkiewicz, O.C. (Eds) (1992), "Numerical methods in industrial forming processes", NUMIFORM 92, Balkema, Rotterdam, Brookfield.
16. Choudhry, S. and Lee, J.K. (1989), "Numerical simulation of thin sheet metal forming processes including bending effects", in Duraham, D.R. and Saigal, A. (Eds), Microstructural Development and Control in Material Processing, MD, Vol. 14, ASME, p. 11.
17. Chung, K. and Lee, D. (1992), "Computer-aided analysis of sheet material forming processes", Vol. 1, 1st Int Conf. on Technology of Plasticity, Tokyo, pp. 660-5.
18. Chung, K. and Richmond, O. (1992), "Sheet forming process design on ideal forming theory", NUMIFORM 92, pp. 455-60.
19. Duroux, P. (1992), "Evaluation numerique des déformations dans les tôles embouties", Thèse de Doctorat, Université de Technologie de Compiègne, Compiègne Cedex.
20. El Mouatassim, M., Thomas, B., Jameux, J.P. and Di Pasquale, E. (1995), "An industrial finite element code for one step simulation of sheet metal forming", NUMIFORM 95, pp. 761-6.
21. Gerdeen, J.C. (1984), "Development of computer program AXIFORM for the analysis of forming of axisymmetric sheet metal parts", Proc. NAMRC-XII, SME Trans., pp. 209-13.
22. Gerdeen, J.C. and Chen, P. (1989), "Geometric mapping method of computer modelling of sheet metal forming", NUMIFORM 89, pp. 437-44.
23. Guo, Y.Q., Batoz, J.L., Detraux, J.M. and Duroux, P. (1990), "Finite element procedures for strain estimations of sheet metal forming parts", International Journal for Numerical Methods in Engineering, Vol. 39, pp. 1385-401.
24. Guo, Y.Q., Batoz, J.L., El Mouatassim, M. and Detraux, J.M. (1992a), "Determination of the trimming contour under the curved blankholders with the inverse approach", Conf. Int. ATMMF'92, Wuhan, 22-24 October.
25. Guo, Y.Q., Batoz, J.L., El Mouatassim, M. and Detraux, J.M. (1992b), "On the estimation of thickness strains in thin car panels by the inverse approach", NUMIFORM 92, pp. 1403-8.
26. Hosford, W.F. and Caddell, R.M. (1983), Metal Forming. Mechanics and Metallurgy, Prentice Hall, Englewood Cliffs, NJ.
27. Kröplin, B. and Luckey, E. (1994), "Metal forming process simulation in industry", International Conference and Workshop, Baden-Baden, 28-30 September.
28. Lee, D. (1994) "Recent innovations in sheet material forming", Journal of Materials Processing Technology, Vol. 46 No. 3-4, pp. 333-49.
29. Lee, D. and Forth, C.M. (1983), "Development of a computer-aided analysis method for sheet material forming processes", Report No. 83CRD223, Metallurgy Laboratory, General Electric Co.
30. Liu, S.D. and Assempoor, A. (1995), "Development of FAST 3D. A design-oriented one step FEM in sheet metal forming", COMPLAS IV, Part II, pp. 1515-26.
31. Liu, S.D. and Karima, M. (1992), "A one step finite element approach for product design of sheet metal stampings", NUMIFORM 92, pp. 497-502.
32. Makinouchi, A., Nakamachi, E., Onate, E. and Wagoner, R. (Eds) (1993), "Numerical simulation of 3D sheet metal forming processes. Verification of simulation with experiments", NUMISHEET 93, SFSRG, Japan.
33. Mattiasson, K., Samuelsson, A., Wood, R.D. and Zienkiewicz, O.C. (Eds) (1986), "Numerical methods in industrial forming processes", NUMIFORM 86, Balkema, Rotterdam, Boston, MA.
34. Narainen, R. (1993), "Comparaison de trois méthodes de calcul pour la simulation de l'emboutissage de tôles axisymétriques", Thèse de Doctorat, Université de Technologie de Compiègne, Compiègne Cedex.
35. Nie, Q.Q. and Lee, D. (1993), "Comparison of different analytical and experimental results obtained under simple sheet metal forming processes", Proc. 4th ICTP, Beijing, China, September, pp. 1630-4.
36. Onate, E. (1994), "A review of some finite element families for thick and thin plate and shell analysis", in Recent Developments in Finite Element Analysis, A book dedicated to R.L. Taylor, T.J.R. Hughes et al. Eds, CIMNE, Barcelona, pp. 98-111.
37. Onate, E., Agelet de Saracibar, C. and Dalin, J.B. (1989), "Finite element analysis of sheet metal forming problems using a selective voided viscous shell membrane formulation", NUMIFORM 89, pp. 23-9.
38. Owen, D.R.J., Onate, E. and Hinton, E. (Eds) (1995), "Computational plasticity - fundamentals and applications", COMPLAS IV, Pineridge Press, Swansea.
39. Peric, D., Owen, D.R.J. and Honnor, M.E. (1991), "Simulation of thin sheet metal forming processes employing a thin shell element", F.E. Simulation of 3-D Sheet Metal Forming Processes in Automotive Industry, Zürich, May, pp. 569-600.
40. Rachik, M. (1993), "Simulation de la mise en forme des structures minces (soufflage des plastiques et emboutissage des tôles)", thèse de Doctorat, Université de Technologie de Compiègne, Compiègne Cedex.
41. Ravier, P. (1994), "Aide à la conception des pièces par des méthodes de calcul simplifié", in CETIM, Calculs en emboutissage, pp. 67-79.
42. Reissner, J. (Chairman) (1991), "FE-Simulation of 3-D sheet metal forming processes in automotive industry", Proc. of the Int. Conf. with Workshop, Zürich, Editor, VDI Verlag.
43. Rio, G., Tathi, B. and Horkay, F. (1993), "Introducing bending rigidity in a finite element membrane sheet metal forming model", in Teodosiu et al., Large Plastic Deformations, Fundamental Aspects and Applications to Metal Forming, pp. 449-56.
44. Roelandt, J.M. and Batoz, J.L. (1992), "Shell finite element for deep drawing problems: computational aspects and results, in finite inelastic deformations - theory and applications", in Besdo, D. and Stein, E. (Eds), IUTAM Symposium, Springer-Verlag, Berlin, Heidelberg.
45. Roelandt, J.M., Liu, X.J., Batoz, J.L. and Jameux, J.P. (1993), "Axisymmetric and general shell elements for large transformations (formulation and applications)", in Teodosiu et al., Large Plastic Deformations, Fundamental Aspects and Applications to Metal Forming, pp. 457-63.
46. Shen, S.F. and Dawson, P. (Eds) (1995), "Simulation of material processing: theory, methods and applications", NUMIFORM 95, Balkema, Rotterdam, Brookfield.
47. Sklad, M.P. (1993), "Modelling of part shape and deformation evolution in conventional forming of large sheet metal components", NUMISHEET 93, pp. 293-302.
48. Sklad, M.P. and Yungblud, B.A. (1992), "Analysis of multi-operation sheet forming processes", NUMIFORM 92, pp. 543-7.
49. Soldaat, R. and Liu, S.D. (1993), "A design oriented metal forming FEM approach for automotive stampings", IBEC 93, Automotive Body Design and Engineering, pp. 96-107.
50. Sowerby, R. (1982), "Determination of large strains in metal forming", Journal of Strain Analysis, Vol. 7, p. 95.
51. Stoughton, T.B. (1985), "Finite element modeling of 1008 AK sheet steel stretched over a rectangular punch with bending effects", Wang and Tang, Computer Modeling of Sheet Metal Forming Process, The Metallurgical Society, pp. 143-59.
52. Teodosiu, C., Raphanel, J.L. and Sidoroff, F. (Eds) (1993), Large Plastic Deformations, Fundamental Aspects and Applications to Metal Forming, Balkema, Rotterdam, Brookfield.
53. Thompson, E.G., Wood, R.D., Zienkiewicz, O.C. and Samuelsson, A. (Eds) (1989), "Numerical methods in industrial forming processes", NUMIFORM 89, Balkema, Rotterdam, Brookfield.]
54. Wang, N.M. and Tang, S.C. (Eds) (1985), Computer Modelling of Sheet Metal Forming Process; Theory, Verification and Applications, The Metallurgical Society.
55. Wang, N.M. and Tang, S.C. (1988), "Analysis of bending effects in sheet forming operations", International Journal for Numerical Methods in Engineering, Vol. 25 No. 1, pp. 253-67.
56. Wang, Z.R. and He, Y. (Eds) (1993), "Advanced technology of plasticity 1993", Proceedings of the 4th Int. Conf. on Technology of Plasticity, Int. Academic Publishers, Beijing.