An energy-based analytical push-out model applied to characterise the interfacial properties of knitted glass fibre reinforced PET

Composites Part A: Applied Science and Manufacturing

Volumn 29, Issue 12, 1998, Pages 1553-1562

  Luethi, B ^a   Reber, R ^a   Mayer, J ^a   Wintermantel, E ^a   Janczak Rusch, J ^b   Rohr, L ^b  

^a ETH ZURICH   (Switzerland)

^b SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

Author keywords

C. analytical modelling; FEM analysis; Glass fibre PET; Interface interphase; Knitted reinforced composites; Push out

Indexed keywords

CRACK INITIATION; FINITE ELEMENT METHOD; FRACTURE; FRICTION; INTERFACIAL ENERGY; LOADS (FORCES); MATHEMATICAL MODELS; PHASE INTERFACES; POLYETHYLENE TEREPHTHALATES; SCANNING ELECTRON MICROSCOPY;

MINIMAL ENERGY PRINCIPLE; PUSH-OUT TESTS;

GLASS FIBER REINFORCED PLASTICS;

EID: 0032306503     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-835X(98)00068-2     Document Type: Article

References (28)

1. Ramakrishna, S., Hamada, H. and Cheng, K. B., Analytical procedure for the prediction of elastic properties of plain knitted fabric-reinforced composites. Composites A, 1997, 28A, 25-37.
2. Wu, W. L., Hamada, H., Kotaki, M. and Maekawa, Z., Design of knitted fabric reinforced composites. J. Reinf. Plast. Compos., 1995, 14, 1032-1042.
3. Karger-Kocsis, J., Yuan, Q., Mayer, J. and Wintermantel, E., Transverse impact behavior of knitted carbon fiber fabric reinforced thermoplastic composite sheets. J. Thermopl. Compos. Mater., 1997, 10, 163-172.
4. Gommers, B., Verpoest, I. and Vanhoutte, P., Modelling the elastic properties of knitted fabric reinforced composites. Compos. Sci. Technol., 1996, 56, 685-694.
5. Mayer, J. and Wintermantel, E., Influence of knit structure and fiber matrix adhesion on failure mechanisms of knitted carbon fiber reinforced thermoplastics. Proc SAMPE, Tokyo, Japan, 1995, pp. 667-72.
6. Herrera-Franco, P. J. and Drzal, L. T., Comparison of methods for the measurement of fibre/matrix adhesion in composites. Composites, 1992, 23, 2-27.
7. Shonaike, G. O., Hamada, H., Maekawa, Z., Matsuda, M., Yuba, T. and Matsuo, T., Influence of cooling conditions on the mechanical properties of commingled yarn composites. J. Thermopl. Compos. Mater., 1996, 9, 76-89.
8. Denault, J. and Vu Khanh, T., Fiber/matrix interaction in carbon/ PEEK composites. J. Thermopl. Compos. Mater., 1993, 6, 190-204.
9. Ye, L. and Friedrich, K., Interlaminar fracture of commingled-fabric-based GF/PET composites. Composites, 1993, 24, 557-564.
10. Mandell, J. F., Chen, J. H. and McGarry, F. J., A microdebonding test for in situ assessment of fibre/matrix bond strength in composite materials. J. Adhesion, 1980, 1, 40-44.
11. Marshall, D. B. and Oliver, W. C., An indentation method for measuring matrix-fiber frictional stresses in ceramic composites. J. Am. Ceram. Soc., 1984, 67, C-259-C-260.
12. Marshall, D. B. and Oliver, W. C., Measurement of interfacial mechanical properties in fiber-reinforced ceramic composites. J. Am. Ceram. Soc., 1987, 70, 542-548.
13. Mandell, J. F., Hong, K. C. C. and Grande, D. H., Interfacial shear strength and sliding resistance in metal and glass-ceramic matrix composites. Ceram. Engng Sci. Proc., 1987, 8, 937-940.
14. Brun, M. K. and Singh, R. N., Effect of thermal expansion mismatch and fiber coating on the fiber/matrix interfacial shear stress in ceramic matrix composites. Adv. Ceram. Mater., 1988, 3, 506-509.
15. Morscher, G., Pirouz, P. and Heuer Arthur, H., Temperature dependence of interfacial shear strength in SiC-fiber-reinforced reaction-bonded silicon nitride. J. Am. Ceram. Soc., 1990, 73, 713-720.
16. Gao, Y. C., Mai, Y. W. and Cotterell, B., Fracture of fiber-reinforced materials. ZAMP, 1988, 39, 550-572.
17. Zhou, L. M. and Mai, Y. W., A new model for evaluation of the interfacial friction coefficient and residual clamping stress in a fibre-push-out test. Phil. Mag. Lett., 1993, 68, 5-11.
18. Zhou, L. M. and Mai, Y. W., On the fibre pullout and pushout problem: effect of fibre anisotropy. ZAMP, 1993, 44, 769-775.
19. Zhou, L. M., Mai, Y. W., Ye, L. and Kim, J. K., Techniques for evaluating interfacial properties of fibre-matrix composites. Key. Engng. Mater., 1995, 104-107, 549-600.
20. Liang, C. and Hutchinson, J. W., Mechanics of the fiber pushout test. Mech. Mater., 1993, 14, 207-221.
21. Hsueh, C.-H., Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites. VII. Improved analyses for bonded interfaces. Mater. Sci. Engng, 1992, A154, 125-132.
22. Grande, D. H., Mandell, J. F. and Hong, K. C. C., Fibre-matrix bond strength studies of glass, ceramic, and metal matrix composites. J. Mater. Sci., 1988, 23, 311-328.
23. Hsueh, C.-H., Interfacial friction analysis for fibre-reinforced composites during fibre push-down (indentation). J. Mater. Sci., 1990, 25, 818-828.
24. Shetty, D. K., Shear-lag analysis of fiber push-out (indentation) tests for estimating interfacial friction stress in ceramic-matrix composites. J. Am. Ceram. Soc., 1988, 71, C107-9.
25. Marshall, D. B. and Oliver, W. C., An indentation method for measuring residual stresses in fiber-reinforced ceramics. Mater. Sci. Engng, 1990, A126, 95-103.
26. Piggott, M. R., Debonding and friction at fibre-polymer interfaces. I: criteria for failure and sliding. Compos. Sci. Technol., 1987, 30, 295-306.
27. Kerans, R. J. and Marshall, D. B., Theoretical analysis of the fiber pullout and pushout tests. J. Am. Ceram. Soc., 1991, 74, 1585-1596.
28. Desaeger, M. and Verpoest, I., On the use of the micro-indentation test technique to measure the interfacial shear strength of fibre-reinforced polymer composites. Compos. Sci. Technol., 1993, 48, 215-226.