-
3
-
-
34250550344
-
A Contribution to the Mo-Al-Si Ternary System
-
H. Nowotny and C. Brukl, "A Contribution to the Mo-Al-Si Ternary System," Monatsh. Chem., 91, 313-18 (1960).
-
(1960)
Monatsh. Chem.
, vol.91
, pp. 313-318
-
-
Nowotny, H.1
Brukl, C.2
-
4
-
-
51249176935
-
The Mo-Si (Molybdenum-Silicon) System
-
A. B. Gokhale and G. J. Abbaschian, "The Mo-Si (Molybdenum-Silicon) System," J. Phase Equil., 12 [4] 493-98 (1991).
-
(1991)
J. Phase Equil.
, vol.12
, Issue.4
, pp. 493-498
-
-
Gokhale, A.B.1
Abbaschian, G.J.2
-
5
-
-
0042208513
-
2 Single Crystal
-
Edited by S. H. Whang, C. T. Liu. D. P. Pope, and J. O. Stiegler. The Metallurgical Society (TMS-AIME), Warrendale, PA
-
2 Single Crystal"; pp. 111-29 in High Temperature Aluminides and Intermetallics. Edited by S. H. Whang, C. T. Liu. D. P. Pope, and J. O. Stiegler. The Metallurgical Society (TMS-AIME), Warrendale, PA, 1990.
-
(1990)
High Temperature Aluminides and Intermetallics
, pp. 111-129
-
-
Umakoshi, Y.1
Hirano, T.2
Sakagami, T.3
Yamane, T.4
-
6
-
-
0039951895
-
2 Based Alloys
-
Edited by L. A. Johnson, D. P. Pope, and J. O. Stiegler. Materials Research Society, Pittsburgh, PA
-
2 Based Alloys"; pp. 169-74 in High-Temperature Ordered Intermetallic Alloys IV. Edited by L. A. Johnson, D. P. Pope, and J. O. Stiegler. Materials Research Society, Pittsburgh, PA, 1991.
-
(1991)
High-Temperature Ordered Intermetallic Alloys IV
, pp. 169-174
-
-
Frankwicz, P.S.1
Perepezko, J.H.2
-
7
-
-
0026896651
-
A Comparative Overview of Molybdenum Disilicide Composites
-
A. K. Vasudevan and J. J. Petrovic, "A Comparative Overview of Molybdenum Disilicide Composites," Mater. Sci. Eng., A, A155, 1-17 (1992).
-
(1992)
Mater. Sci. Eng., a
, vol.A155
, pp. 1-17
-
-
Vasudevan, A.K.1
Petrovic, J.J.2
-
9
-
-
0026896403
-
Appraisal of Other Silicides as Structural Materials
-
D. M. Shah, D. Berczick, D. L. Anton, and R. Hecht, "Appraisal of Other Silicides as Structural Materials," Mater. Sci. Eng. A, A155, 45-57 (1992).
-
(1992)
Mater. Sci. Eng. A
, vol.A155
, pp. 45-57
-
-
Shah, D.M.1
Berczick, D.2
Anton, D.L.3
Hecht, R.4
-
11
-
-
0025406380
-
High Temperature Oxidation of Molybdenum Aluminosilicides
-
V. U. Kodash, P. S. Kisly, and V. J. Shemet, "High Temperature Oxidation of Molybdenum Aluminosilicides," High Temp. Sci., 29, 143-52 (1990).
-
(1990)
High Temp. Sci.
, vol.29
, pp. 143-152
-
-
Kodash, V.U.1
Kisly, P.S.2
Shemet, V.J.3
-
13
-
-
0031169840
-
A Study of Micropyretic Reactions in the Mo-Si-Al Ternary System
-
M. Fu, "A Study of Micropyretic Reactions in the Mo-Si-Al Ternary System," J. Mater. Res., 12 [6] 1481-91 (1997).
-
(1997)
J. Mater. Res.
, vol.12
, Issue.6
, pp. 1481-1491
-
-
Fu, M.1
-
14
-
-
0024663748
-
Self-Propagating Exothermic Reactions: The Synthesis of High-Temperature Materials by Combustion
-
Z. A. Munir and U. Anselmi-Tamburini, "Self-Propagating Exothermic Reactions: The Synthesis of High-Temperature Materials by Combustion," Mater. Sci. Rep., 3, 277-365 (1989).
-
(1989)
Mater. Sci. Rep.
, vol.3
, pp. 277-365
-
-
Munir, Z.A.1
Anselmi-Tamburini, U.2
-
15
-
-
0025383991
-
Self-Propagating High-Temperature (Combustion) Synthesis (SHS) of Powder-Compacted Materials
-
H. C. Yi and J. J. Moore, "Self-Propagating High-Temperature (Combustion) Synthesis (SHS) of Powder-Compacted Materials," J. Mater. Sci., 25, 1159-68 (1990).
-
(1990)
J. Mater. Sci.
, vol.25
, pp. 1159-1168
-
-
Yi, H.C.1
Moore, J.J.2
-
16
-
-
0029203264
-
Processing of Composite Materials by the Micropyretic Synthesis Method
-
M. Fu and J. A. Sekhar, "Processing of Composite Materials by the Micropyretic Synthesis Method," Key Eng. Mater., 108-110, 19-44 (1995).
-
(1995)
Key Eng. Mater.
, vol.108-110
, pp. 19-44
-
-
Fu, M.1
Sekhar, J.A.2
-
17
-
-
2242457882
-
Processing Ti-B-Cu Composites by Combustion Synthesis
-
Edited by V. A. Ravi and T. S. Srivatsan. The Metallurgical Society, Warrendale, PA
-
H. P. Li, S. Bhaduri, and J. A. Sekhar, "Processing Ti-B-Cu Composites by Combustion Synthesis"; pp. 45-59 in Processing and Fabrication of Advanced Materials for High Temperature Applications. Edited by V. A. Ravi and T. S. Srivatsan. The Metallurgical Society, Warrendale, PA, 1992.
-
(1992)
Processing and Fabrication of Advanced Materials for High Temperature Applications
, pp. 45-59
-
-
Li, H.P.1
Bhaduri, S.2
Sekhar, J.A.3
-
18
-
-
51249167067
-
An Investigation of the Effect of Porosity and Diluents on Micropyretic Synthesis
-
M. G. Lakshmikantha and J. A. Sekhar, "An Investigation of the Effect of Porosity and Diluents on Micropyretic Synthesis," Metall. Trans. A, 24A, 617-27 (1993). (Also see M. G. Lakshmikantha and J. A. Sekhar, "Influence of Multi-Dimensional Oscillating Combustion Fronts on Thermal Profiles," J. Mater. Sci., 28, 6403-408 (1993).)
-
(1993)
Metall. Trans. A
, vol.24 A
, pp. 617-627
-
-
Lakshmikantha, M.G.1
Sekhar, J.A.2
-
19
-
-
0027806189
-
Influence of Multi-Dimensional Oscillating Combustion Fronts on Thermal Profiles
-
M. G. Lakshmikantha and J. A. Sekhar, "An Investigation of the Effect of Porosity and Diluents on Micropyretic Synthesis," Metall. Trans. A, 24A, 617-27 (1993). (Also see M. G. Lakshmikantha and J. A. Sekhar, "Influence of Multi-Dimensional Oscillating Combustion Fronts on Thermal Profiles," J. Mater. Sci., 28, 6403-408 (1993).)
-
(1993)
J. Mater. Sci.
, vol.28
, pp. 6403-6408
-
-
Lakshmikantha, M.G.1
Sekhar, J.A.2
-
20
-
-
0028368097
-
Analytical Modeling of the Propagation of a Thermal Reaction Front in Condensed Systems
-
M. G. Lakshmikantha and J. A. Sekhar, "Analytical Modeling of the Propagation of a Thermal Reaction Front in Condensed Systems," J. Am. Ceram. Soc., 77 [1] 202-10 (1994).
-
(1994)
J. Am. Ceram. Soc.
, vol.77
, Issue.1
, pp. 202-210
-
-
Lakshmikantha, M.G.1
Sekhar, J.A.2
-
21
-
-
0027541904
-
Dimensional Changes during Micropyretic Synthesis
-
H. P. Li and J. A. Sekhar, "Dimensional Changes during Micropyretic Synthesis," Mater. Sci. Eng., A, A160, 221-27 (1993).
-
(1993)
Mater. Sci. Eng., A
, vol.A160
, pp. 221-227
-
-
Li, H.P.1
Sekhar, J.A.2
-
22
-
-
0024015134
-
Reactive Sintering Nickel-Aluminide to Near Full Density
-
A. Bose, B. H. Rabin, and R. M. German, "Reactive Sintering Nickel-Aluminide to Near Full Density," Powder Metall. Int., 20 [3] 25-30 (1988).
-
(1988)
Powder Metall. Int.
, vol.20
, Issue.3
, pp. 25-30
-
-
Bose, A.1
Rabin, B.H.2
German, R.M.3
-
24
-
-
0026084132
-
Powder Fabrication of Monolithic and Composite NiAl
-
D. E. Alman and N. S. Stoloff, "Powder Fabrication of Monolithic and Composite NiAl," Int. J. Powder Metall. (Princeton, NJ), 27 [1] 29-41 (1991).
-
(1991)
Int. J. Powder Metall. (Princeton, NJ)
, vol.27
, Issue.1
, pp. 29-41
-
-
Alman, D.E.1
Stoloff, N.S.2
-
26
-
-
85167827069
-
The Pulsed Ultrasonic Velocity Method for Determining Material Dynamic Elastic Moduli
-
Edited by A. Wolfenden. American Society for Testing and Materials (ASTM), Philadelphia, PA
-
G. V. Blessing, "The Pulsed Ultrasonic Velocity Method for Determining Material Dynamic Elastic Moduli"; pp. 47-57 in Dynamic Elastic Modulus Measurement in Materials. Edited by A. Wolfenden. American Society for Testing and Materials (ASTM), Philadelphia, PA, 1990.
-
(1990)
Dynamic Elastic Modulus Measurement in Materials
, pp. 47-57
-
-
Blessing, G.V.1
-
27
-
-
84987335986
-
A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I. Direct Crack Measurement
-
G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, "A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I. Direct Crack Measurement," J. Am. Ceram. Soc., 64 [9] 533-38 (1981). (Also see S. B. Bhaduri and J. A. Sekhar, "Mechanical Properties of Large Quasi-Crystals in the Al-Cu-Li System," Nature (London), 327, 609-11 (1987).)
-
(1981)
J. Am. Ceram. Soc.
, vol.64
, Issue.9
, pp. 533-538
-
-
Anstis, G.R.1
Chantikul, P.2
Lawn, B.R.3
Marshall, D.B.4
-
28
-
-
0003229209
-
Mechanical Properties of Large Quasi-Crystals in the Al-Cu-Li System
-
G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, "A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I. Direct Crack Measurement," J. Am. Ceram. Soc., 64 [9] 533-38 (1981). (Also see S. B. Bhaduri and J. A. Sekhar, "Mechanical Properties of Large Quasi-Crystals in the Al-Cu-Li System," Nature (London), 327, 609-11 (1987).)
-
(1987)
Nature (London)
, vol.327
, pp. 609-611
-
-
Bhaduri, S.B.1
Sekhar, J.A.2
-
29
-
-
0029208998
-
An Analysis of the Capillary Force and Optimum Liquid Volume in a Transient Liquid Phase Sintering Process
-
C. Hu and T. N. Baker, "An Analysis of the Capillary Force and Optimum Liquid Volume in a Transient Liquid Phase Sintering Process," Mater. Sci. Eng., A, A190, 125-29 (1995).
-
(1995)
Mater. Sci. Eng., A
, vol.A190
, pp. 125-129
-
-
Hu, C.1
Baker, T.N.2
-
30
-
-
36849118464
-
Densification during Sintering in the Presence of a Liquid Phase. I. Theory
-
W. D. Kingery, "Densification during Sintering in the Presence of a Liquid Phase. I. Theory," J. Appl. Phys., 30. 301-306 (1959).
-
(1959)
J. Appl. Phys.
, vol.30
, pp. 301-306
-
-
Kingery, W.D.1
-
31
-
-
0003689862
-
-
ASM International, Materials Park, OH
-
T. B. Massalski, H. Okamoto, P. R. Subramanian, and L. Kacprzak, Binary Alloy Phase Diagrams, Vol. 1; 2nd Ed. ASM International, Materials Park, OH, 1990.
-
(1990)
Binary Alloy Phase Diagrams, Vol. 1; 2nd Ed.
, vol.1
-
-
Massalski, T.B.1
Okamoto, H.2
Subramanian, P.R.3
Kacprzak, L.4
-
33
-
-
0026900094
-
Synthesis of Molybdenum Disilicide by Mechanical Alloying
-
R. B. Schwarz, S. R. Srinivasan, J. J. Petrovic, and C. J. Maggiore, "Synthesis of Molybdenum Disilicide by Mechanical Alloying," Mater. Sci. Eng., A, A155, 75-83 (1992).
-
(1992)
Mater. Sci. Eng., A
, vol.A155
, pp. 75-83
-
-
Schwarz, R.B.1
Srinivasan, S.R.2
Petrovic, J.J.3
Maggiore, C.J.4
-
34
-
-
0001397601
-
Processing Temperature Effects on Molybdenum Disilicide
-
R. K. Wade and J. J. Petrovic, "Processing Temperature Effects on Molybdenum Disilicide," J. Am. Ceram. Soc., 75 [11] 3160-62 (1992).
-
(1992)
J. Am. Ceram. Soc.
, vol.75
, Issue.11
, pp. 3160-3162
-
-
Wade, R.K.1
Petrovic, J.J.2
-
35
-
-
0026233124
-
2
-
2," Mater. Sci. Eng., A, A144, 287-91 (1991).
-
(1991)
Mater. Sci. Eng., A
, vol.A144
, pp. 287-291
-
-
Cotton, J.D.1
Kim, Y.S.2
Kaufman, M.J.3
-
36
-
-
84985131460
-
Carbon Additions to Molybdenum Disilicide: Improved High-Temperature Mechanical Properties
-
S. Maloy, A. H. Heuer, J. Lewandowski, and J. Petrovic, "Carbon Additions to Molybdenum Disilicide: Improved High-Temperature Mechanical Properties." J. Am. Ceram. Soc., 74 [10] 2704-706 (1991).
-
(1991)
J. Am. Ceram. Soc.
, vol.74
, Issue.10
, pp. 2704-2706
-
-
Maloy, S.1
Heuer, A.H.2
Lewandowski, J.3
Petrovic, J.4
-
38
-
-
0000316263
-
Microstructure Dependence of Mechanical Behavior of Ceramics
-
Treatise on Materials Science and Technology, Edited by R. K. MacCrone. Academic Press, New York
-
R. W. Rice, "Microstructure Dependence of Mechanical Behavior of Ceramics"; pp. 199-381 in Treatise on Materials Science and Technology, Volume 11, Properties and Microstructure. Edited by R. K. MacCrone. Academic Press, New York, 1977.
-
(1977)
Properties and Microstructure
, vol.11
, pp. 199-381
-
-
Rice, R.W.1
-
44
-
-
0026898062
-
2-Based Alloys and Composites
-
2-Based Alloys and Composites," Mater. Sci. Eng., A, A155, 147-58 (1992).
-
(1992)
Mater. Sci. Eng., A
, vol.A155
, pp. 147-158
-
-
Gibala, R.1
Ghosh, A.K.2
Van Aken, D.C.3
Srolovitz, D.J.4
Basu, A.5
Chang, H.6
Mason, D.P.7
Yang, W.8
-
48
-
-
0027147450
-
2 Pest during Low Temperature Oxidation
-
2 Pest during Low Temperature Oxidation," J. Mater. Res., 8 [1] 214-26 (1993).
-
(1993)
J. Mater. Res.
, vol.8
, Issue.1
, pp. 214-226
-
-
Chou, T.C.1
Nieh, T.G.2
-
49
-
-
0026897799
-
2-Based Composites
-
2-Based Composites," Mater. Sci. Eng., A, A155, 183-98 (1992).
-
(1992)
Mater. Sci. Eng., A
, vol.A155
, pp. 183-198
-
-
Cook, J.1
Khan, A.2
Lee, E.3
Mahapatra, R.4
-
51
-
-
0026880286
-
Low Temperature Oxidation of Molybdenum Disilicide
-
P. J. Meschter. "Low Temperature Oxidation of Molybdenum Disilicide," Metall. Trans., A, 23A, 1763-72 (1992).
-
(1992)
Metall. Trans., A
, vol.23 A
, pp. 1763-1772
-
-
Meschter, P.J.1
|