Designation of mode mix in orthotropic composite delamination problems

International Journal of Fracture

Volumn 90, Issue 4, 1998, Pages 383-400

  Narayan, S H ^a   Beuth, J L ^a  

^a CARNEGIE MELLON UNIVERSITY   (United States)

Author keywords

Composite; Delamination; Fracture mechanics; Mode mix; Orthotropic; Toughness

Indexed keywords

DEFORMATION; DELAMINATION; FRACTURE MECHANICS; FRACTURE TOUGHNESS; INTERFACES (MATERIALS); STRESS INTENSITY FACTORS;

COMPOSITE DELAMINATION; INTERLAMINAR CRACKING;

COMPOSITE MATERIALS;

EID: 0032280622     PISSN: 03769429     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1007466905925     Document Type: Article

References (29)

1. Beuth, J.L. (1996). Separation of crack extension modes in orthotropic delamination models. International Journal of Fracture 77, 305-321.
2. Charalambides, P.G., Lund, J., Evans, A.G. and McMeeking, R.M. (1989). A test specimen for determining the fracture resistance of bimaterial interfaces. Journal of Applied Mechanics 56, 77-82.
3. Charalambides, P.G. and Zhang, W. (1995). An energy method for calculating the stress intensities in orthotropic bimaterial fracture. International Journal of Fracture 76, 97-120.
4. Daghyani, H.R., Ye, L. and Mai, Y.-W. (1996). Mixed-mode fracture of adhesively bonded CF-epoxy composite joints. Journal of Composite Materials 30, 1248-1265.
5. Davidson, B.D. (1993). Prediction of energy release rate for edge delamination using a crack tip element approach. Composite Materials: Fatigue and Fracture: Fifth Volume, ASTM STP 1230 (Edited by R.H. Martin), American Society for Testing and Materials, 155-173.
6. Deng, X. (1994). An asymptotic analysis of stationary and moving cracks with frictional contact along bimaterials interfaces and in homogeneous solids. International Journal of Solids and Structures 31, 2407-2429.
7. Herakovich, C.T. (1984). Composite laminates with negative through-the-thickness Poisson's ratios. Journal of Composite Materials 18, 447-455.
8. Hutchinson, J.W., Mear, M.E. and Rice, J.R. (1987). Crack paralleling an interface between dissimilar materials. Journal of Applied Mechanics 53, 828-832.
9. Hutchinson, J.W. and Suo, Z. (1992). Mixed mode cracking in layered materials. Advances in Applied Mechanics (Edited by J.W. Hutchinson and T.Y. Wu), Academic Press, San Diego, 63-191.
10. Irwin, G.R. (1957). Analysis of stresses and strains near the end of a crack traversing a plate. Journal of Applied Mechanics 24, 361-364.
11. Johnson, W.S. and Mangalgiri, P.D. (1993). Influence of the resin on interlaminar mixed-mode fracture. Toughened Composites, ASTM STP 937 (Edited by N.J. Johnson), American Society for Testing and Materials, Philadelphia, 295-315.
12. Jones, R.M. (1975). Mechanics of Composite Materials. Scripta Book Company, Washington, D.C.
13. Liu, S., Kutlu, Z. and Chang, F.-K. (1993). Matrix cracking and delamination in laminated composite beams subjected to a transverse concentrated line load. Journal of Composite Materials 27, 436-469.
14. Matos, P.P.L., McMeeking, R.M., Charalambides, P.G. and Drory, M.D. (1989). A method for calculating stress intensities in bimaterial fracture. International Journal of Fracture 40, 235-254.
15. O'Brien, T.K. (1982). Characterization of delamination onset and growth in a composite laminate. Damage in Composite Materials, ASTM STP 775, 140-147.
16. O'Brien, T.K. (1993). Local delamination in laminates with angle ply cracks, Part II: Delamination fracture analysis and fatigue characterization. Composite Materials: Fatigue and Fracture, Fourth Volume, ASTM STP 1156 (Edited by W.W. Stinchcomb and N.E. Ashbaugh), American Society for Testing and Materials, Philadelphia, 507-538.
17. O'Brien, T.K. and Hooper, S.J. (1993). Local delamination in laminates with angle ply cracks, Part I: Tension tests and stress analysis. Composite Materials: Fatigue and Fracture, Fourth Volume, ASTM STP 1156 (Edited by W.W. Stinchcomb and N.E. Ashbauth), American Society for Testing and Materials, Philadelphia, 491-506.
18. Qu, J. and Bassani, J.L. (1993). Interfacial fracture mechanics for anisotropic bimaterials. Journal of Applied Mechanics 60, 422-431.
19. Reeder, J.R. (1993). A bilinear failure criterion for mixed-mode delamination. Composite Materials: Testing and Design (Eleventh Volume), ASTM STP 1206, 303-322.
20. Rice, J.R. (1988). Elastic fracture mechanics concepts for interfacial cracks. Journal of Applied Mechanics 55, 98-103.
21. Rybicki, E.F. and Kanninen, M.F. (1977). A finite element calculation of stress intensity factors by modified crack closure integral. Engineering Fracture Mechanics 9, 931-938.
22. Song, S.J. and Waas, A.M. (1995). Energy-based mechanical model for mixed-mode failure of laminated composites. AIAA Journal 33, 739-745.
23. Sun, C.T. and Manoharan, M.G. (1989). Strain energy release rates of an interfacial crack between two orthotropic solids. Journal of Composite Materials 23, 460-478.
24. Sun, C.T. and Qian, W. (1996). The role of friction in the fracture of interfacial cracks. Proceedings of the 14th U.S. Army Symposium on Solid Mechanics (Edited by K.R. Iyer and S.-C. Chou), Batelle Press, Columbus, 432-442.
25. Suo, Z. (1990). Singularities, interfaces and cracks in dissimilar anisotropic media. Proceedings of the Royal Society of London A427, 331-358.
26. Suo, Z. and Hutchinson, J.W. (1990). Interface crack between two elastic layers. International Journal of Fracture 43, 1-18.
27. Tao, J. and Sun, C.T. (1997). Influence of ply orientation on delamination in composite laminates. School of Aeronautics and Astronautics, Purdue University, West Lafayette, Indiana.
28. Wang, S.S. (1984). Edge delamination in angle-ply composite laminates. AIAA Journal 22, 256-264.
29. Wang, J.T., Raju, I.S., Davila C.G. and Sleight, D.W. (1993). Computation of strain energy release rates for skin-stiffener debonds modeled with plate elements. Proc. 34th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Part 3, Paper AIAA 93-1501-CP, 1680-1692.