Power generation and aeropropulsion gas turbines: From combustion science to combustion technology

Symposium (International) on Combustion

Volumn 27, Issue 2, 1998, Pages 1793-1807

  Correa, Sanjay M ^a  

^a GE GLOBAL RESEARCH   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIRCRAFT PROPULSION; CERAMIC MATERIALS; COAL GAS; COMBINED CYCLE POWER PLANTS; CRUDE PETROLEUM; ELECTRIC POWER GENERATION; RENEWABLE ENERGY RESOURCES; SUPERALLOYS; SUPERSONIC AIRCRAFT; TECHNOLOGY TRANSFER; THERMAL INSULATING MATERIALS;

MICROPOWER;

GAS TURBINES;

EID: 0032265709     PISSN: 00820784     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0082-0784(98)80021-0     Document Type: Conference Paper

References (112)

1. Whittle, Sir Frank, Gas Turbine Aero-Thermodynamics, Pergamon Press, New York, 1981.
2. Correa, S. M., Combust. Sci. Technol. 87 (1-6):329-362 (1992).
3. Lefebvre, A. H., Gas Turbine Combustion, Hemisphere, New York, 1983.
4. Smil, V., Sci. Am. 76-81 (July 1997).
5. Bowman, C. T., in Twenty-Fourth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1996, pp. 859-878.
6. Third Conference of the Parties to the U.N. Framework on Climate Change, Kyoto, Japan, December 1-10, 1997.
7. Prather, M. J. and Logan, J. A., in Twenty-Fifth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1994, pp. 1513-1527.
8. Woods, T. J. and Holtberg, P. D., "Long-Term Trends in U.S. Gas Supply and Prices," GRI report 97/0009, July 1997.
9. Miller, J. A. and Bowman, C. T., Prog. Energy Combust. Sci. 15:287-388 (1989).
10. Zeldovich, Ya. B., Sadovnikov, P. Ya., and Frank-Kamentskii, D. A., Oxidation of Nitrogen in Combustion, Academy of Sciences of the USSR, 1947.
11. Drake, M. C., Correa, S. M., Pitz, R. W., Fenimore, C. P., and Shyy, W., Combust. Flame 69:347-365 (1987).
12. Fenimore, C. P., in Thirteenth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1971, pp. 373-380.
13. Malte, P. C. and Pratt, D. T., in Fifteenth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1974, pp. 1061-1070.
14. Correa, S. M. and Smooke, M. D., in Twenty-Third Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1990, pp. 289-295.
15. Drake, M. C. and Blint, R. J., Combust. Flame 76:151-167 (1989).
16. Leonard, G. L. and Correa, S. M., ASME/PD Vol. 30, (S. N. Singh, ed.), pp. 69-74, 1990.
17. 2O Emissions from Combustion Processes," International Climate Change Research Conference, Maastricht, The Netherlands, December 6-9, 1994.
18. 2 Plume Formation," GE report MR 4240-01-203, 1996.
19. Sano, T., Combust. Sci. Technol. 38:129-144 (1985).
20. Hori, M., Matsunaga, N., Malte, P. C., and Marinov, N. M., in Twenty-Fourth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1992, pp. 909-916.
21. Koff, B. L., "Aircraft Gas-Turbine Emissions Challenge," Symposium on the Aeroengine and the Environment, Berlin, Germany, June 17, 1992.
22. Jackson, M. R., Ritter, A. M., Abuaf, N., Lacey, N., Lacey, M. A., Feitelberg, A. S., and Lang, P., ASME paper 96-GT-219, 1996.
23. Verdouw, A. J., Detroit Diesel Allison report EDR 9039, 1976.
24. Corman, J. C. and Paul, T. C., "Power Systems for the 21st Century: "H" Gas Turbine Combined Cycles," Power Gen. Europe '95, Amsterdam, The Netherlands, May 1995.
25. Richerson, D. W., Mech. Eng. p 80-83 (Sept. 1997).
26. Davis, L. B., ASME paper 96-GT-27, 1996.
27. Antos, R. J., "Westinghouse Combustion Development: 1996 Technology Update," Power Gen '95, Anaheim, CA, December 5-7, 1995.
28. Puri, R., Stansel, D. M., Smith, D. A., and Razdan, M. K., ASME paper 95-GT-406, 1995.
29. Rocha, G., Saadatmand, M., and Bolander, G.,ASME paper 95-GT-411, 1995.
30. Snyder, T. S., Rosfjord, T. J., McVey, J. B., Hu, A. S., and Schlein, B. C., ASME paper 94-GT-234, 1994.
31. Bahlmann, F. C. and Visser, B. M., ASME paper 94-GT-405, 1994.
32. Etheridge, C. J., ASME paper 94-GT-255, 1994.
33. x Combustion System," Canadian Gas Association Symposium on Industrial Application of Gas-Turbines, Banff, Canada, October 13-15, 1993.
34. Leonard, G. L. and Stegmaier, J., ASME paper 93-GT-288, 1993.
35. Semerjian, H. and Vranos, A., in Sixteenth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1976, pp. 169-179.
36. Kandebo, S. W., Aviation Week & Space Technology, October 13, 1997, p. 74.
37. Plee, S. L. and Mellor, A. M., Combust. Flame 32:193-203 (1978).
38. Spadaccini, L. J. and Colket, M. B., Prog. Energy Combust. Sci. 20:431-460 (1994).
39. Correa, S. M. and Dean, A. J., in Twenty-Fifth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1994, pp. 1293-1299.
40. Ciezki, H. K. and Adomeit, G., Combust. Flame 93:421-433 (1993).
41. Bowman, M. J., "Effect of Liquid Contaminants on the Autoignition of Natural Gas," in preparation, GE Class 1 report, 1998.
42. Rayleigh, Lord J. W. S., The Theory of Sound, Dover, New York, 1945.
43. Candel, S. M., in Twenty-Fourth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1992, pp. 1277-1296.
44. McManus, K., Poinsot, T., and Candel, S., Prog. Energy Combust. Sci. 19:1-29 (1993).
45. Schadow, K., Yang, V., Culick, F., Rosfjord, T., Sturgess, G., and Zinn, B., AGARD report 820, September 1997.
46. Richards, G. A., Gemmen, R. S., and Yip, M. J., Trans. ASME 119:776-782 (1997).
47. Neumeier, Y., Nabi, A., Arbel, A., Vertzberger, M., and Zinn, B. T., J. Prop. Power 13(6):705-713 (1997).
48. Leipertz, A., Obertacke, R., and Wintrich, F., in Twenty-Sixth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1996, pp. 2869-2876.
49. Hantschk, C., Herman, J., and Vortmeyer, D., in Twenty-Sixth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1996, pp. 2835-2842.
50. Davis, N. T. and Samuelsen, G. S., in Twenty-Sixth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1996, pp. 2819-2826.
51. Sivasegaram, S., Tsai, R. F., and Whitelaw, J. H., Combust. Sci. Technol. 105:67-83 (1995).
52. Brouwer, J., Ault, B. A., Bobrow, J. E., and Samuelsen, G. S., in Twenty-Third Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1991, pp. 1087-1092.
53. Bloxsidge, G. J., Dowling, A. P., and Langhorne, P. J., J. Fluid Mech. 193:445-473 (1988).
54. Correa, S. M., J. Prop. Power 8(6):1144-1151 (1992).
55. Sontag, R. E. and Van Wylen, G. J., Introduction to Thermodynamics: Classical and Statistical, Wiley, New York, 1971.
56. Joos, F., Althaus, R., Brunner, P., Eroglu, A., Paikert, B., and Syed, K., Power Gen Asia '95, Singapore, September 27-29, 1995.
57. Waldherr, G. A. and Roos, M. R., "Reheat Combustion Simulations," GE-CRD MSL report, March 1996.
58. Pfefferle, L. D. and Pfefferle, W. C., Cataly. Rev. Sci. Eng. 29(2&3):219-267 (1987).
59. x Emissions: Catalyst Design and Performance Characteristics," Second International Workshop on Catalytic Combustion, Tokyo, Japan, April 18-20, 1994.
60. Cowell, L. H. and Larkin, M. P., ASME paper 94-GT-254, 1994.
61. x Advantage of Catalytic Combustion," Second International Workshop on Catalytic Combustion, Tokyo, Japan, April 18-20, 1994.
62. Scherer, V. and Griffin, T., ASME paper 94-JPGCGT-1, 1994.
63. Schlegel, A., Buser, S., Benz, P., Bockhorn, H., and Mauss, F., in Twenty-Fifth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1994, pp. 1019-1026.
64. Schlatter, J. C., Dalla Betta, R. A., Nickolas, S. G., Cutrone, M. B., Beebe, K. W., and Tsuchiya, T., ASME paper 97-GT-57, 1997.
65. Correa, S. M., Combust. Flame 102:205-208 (1995).
66. Anson, D., "Gas Turbine Fuels from Coal and Biomass," ASME Turbo Expo '97, Orlando, FL, June 2-5, 1997.
67. Yan, J., Alvfors, P., Eidenstein, L., and Svedberg, G., Mech. Eng. 94-96 (October 1997).
68. Feitelberg, A. S. and Lacey, M. A., ASME paper 97-GT-127, 1997.
69. Benjamin, M. A. and Crocker, D. S., AIAA paper 96-3165, 1996.
70. Faeth, G. M., in Twenty-Sixth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1996, pp. 1593-1612.
71. Givler, S. D. and Abraham, J., Prog. Energy Combust. Sci. 22:1-28 (1996).
72. Osgerby, I. T., AIAA J. 12:743-754 (1974).
73. Kennedy, I. M., Prog. Energy Combust. Sci. 23:95-132 (1997).
74. Fairweather, M., Jones, W. P., Ledin, H. S., and Linstedt, R. P., in Twenty-Fourth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1992, pp. 1067-1074.
75. Hazlett, R. N., "Thermal Oxidation Stability of Aviation Turbine Fuels," ASTM Monograph 1, 1991.
76. Brandauer, M., Schulz, A., and Wittig, S., ASME paper 95-GT-49, 1995.
77. Dean, A. J., Bradt, J. E., and Ackerman, J. F., ASME paper 96-GT-46, 1996.
78. Clark, J. S. and DeCorso, S. M., eds., "Stationary Gas-Turbine Alternative Fuels," American Society for Testing and Materials, Special Technical Publication 809, 1983.
79. Freeman, A. and Kaufman, E., "Considerations When Burning Ash-Bearing Fuels in Heavy-Duty Gas-Turbines," GE Power Systems report 3764, Schenectady, NY, May 1993.
80. Johnson, K. W., ASME paper 96-GT-7, 1996.
81. Bilger, R. W., Combust. Sci. Technol. 98:223-228 (1994).
82. Correa, S. M., Comp. Sys. Eng. 5(2):135-145 (1994).
83. Kobayashi, H., Tamura, T., Maruta, K., Nioka, T., and Williams, F. A., in Twenty-Sixth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1996, pp. 389-396.
84. Peters, N., in Twenty-First Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1986, pp. 1231-1250.
85. Bilger, R. W., in Twenty-Second Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1988, pp. 475-488.
86. Gulati, A., J. Prop. Power 10:169-175 (1994).
87. Wolfrum, J., "Lasers in Combustion: Diagnostics and Control," Hottel Lecture, in Twenty-Seventh (International) Symposium on Combustion, Boulder, CO, August 2-7, 1998.
88. Dimotakis, P. E., "Turbulent Shear Layer Mixing with Fast Chemical Reactions," GALCIT report FM87-1, 1987.
89. Barlow, R. S., Fiechtner, G. J., and Chen, J.-Y., in Twenty-Sixth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1996, pp. 2199-2206.
90. Nandula, S. P., Pitz, R. W., Barlow, R. S., and Fiechtner, G. J., AIAA paper 96-0937, 1996.
91. Masri, A. R., Dibble, R. W., and Barlow, R. S., Prog. Energy Combust. Sci. 22:307-362 (1996).
92. Bilger, R. W., Yip, B., Long, M. B., and Masri, A. R., Combust. Sci. Technol. 72:137-155 (1990).
93. Bachalo, W. D., in Twenty-Fifth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1994, pp. 333-344.
94. Zhu, J. Y., Tsuruda, T., Sowa, W., and Samuelsen, G. S., J. Eng. Gas-Turbines Power 115:515-521 (1993).
95. Rizk, N. K. and Mongia, H. C., J. Eng. Gas-Turbines Power 115:612-619 (1993).
96. Mongia, H. C., Reynolds, R. S., Bruce, T. W., and Coleman, E., "Combustor Design Criteria Validation," USARTL-TR-78-55, 1979.
97. Correa, S. M. and Shyy, W., Prog. Energy Combust. Sci. 13(5):249-292 (1987).
98. Tolpadi, A. K., Correa, S. M., Burrus, D. L., and Mongia, H. C., J. Prop. Power 13:218-225 (1997).
99. Pope, S. B., Prog. Energy Combust. Sci. 11:119-192 (1985).
100. Pope, S. B., in Twenty-Third Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1990, pp. 591-612.
101. M. D. Smooke, ed., "Reduced Kinetic Mechanisms and Asymptotic Approximations for Methane-Air Flames," Springer-Verlag, Berlin, 1990.
102. N. Peters and B. Rogg, eds., "Reduced Kinetic Mechanisms for Applications in Combustion Systems," Springer-Verlag, Berlin, 1993.
103. Lockwood, F. C. and Shah, N. G., in Eighteenth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1981, pp. 1405-1414.
104. Magnussen, B. F., Hjertager, B. H., Olsen, J. G., and Bhaduri, D., in Seventeenth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1978, pp. 1383-1393.
105. Hu, I. Z. and Correa, S. M., in Twenty-Sixth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1996, pp. 307-313.
106. Pope, S. B., Combust. Theory Mod. 1:41-63 (1997).
107. Fischberg, C. J., Rhie, C. M., Zacharias, R. M., Bradley, P. C., and DesSurealt, T. M., "Using Hundreds of Workstations for Production Running of Parallel CFD Applications," Parallel CFD '95, Pasadena, CA, June 1995.
108. Najm, H. M. and Ghoniem, A. F., Combust. Sci. Technol. 94:259-278 (1993).
109. McMurtry, P. A., Menon, S., and Kerstein, A., in Twenty-Fourth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1992, pp. 271-278.
110. Ashley, S., Mech. Eng. 78-81 (October 1997).
111. Scott, W. G., Power Eng. 46-50 (September 1997).
112. Vakil, H. B., "Thermodynamics Analysis of Gas-Turbine Cycles with Chemical Analysis," Second World Congress of Chemical Engineering, Montreal, Canada, October 4-9, 1981