메뉴 건너뛰기




Volumn 1329, Issue , 1998, Pages 274-297

Characterization by notched and precracked charpy tests of the in-service degradation of reactor pressure vessel steel fracture toughness

Author keywords

Damage modeling; Embrittlement; Fracture toughness; Low alloy steel; Micromechanics; Microstructure; Reactor pressure vessel; Safety

Indexed keywords

BENDING (DEFORMATION); DEFLECTION (STRUCTURES); FRACTURE TESTING; IMPACT TESTING; LOAD TESTING; PRESSURE VESSELS; STEEL STRUCTURES; STEEL TESTING; STRAIN; STRUCTURAL ANALYSIS; TENSILE PROPERTIES; TENSILE STRESS;

EID: 0032230512     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp37996s     Document Type: Article
Times cited : (9)

References (50)
  • 1
    • 0342824026 scopus 로고
    • Fracture Toughness Requirements for Protection Against Pressurized Thermal Shock Events
    • Rules and Regulations, May 15
    • "Fracture Toughness Requirements for Protection Against Pressurized Thermal Shock Events", Federal Register, Vol. 56, No. 94, Rules and Regulations, May 15,1991 and Code of Federal Regulation, Title 10, Part 50, Article 61, July 1991. "Protection Against Non-Ductile Failure", Appendix G to Section III of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code. "Rules for Inservice Inspection of Nuclear Power Plant Components", ASME Boiler and Pressure Vessel Code, Section XI, (1974).
    • (1991) Federal Register , vol.56 , Issue.94
  • 2
    • 11744258496 scopus 로고
    • Title 10, Article 61, July
    • "Fracture Toughness Requirements for Protection Against Pressurized Thermal Shock Events", Federal Register, Vol. 56, No. 94, Rules and Regulations, May 15,1991 and Code of Federal Regulation, Title 10, Part 50, Article 61, July 1991. "Protection Against Non-Ductile Failure", Appendix G to Section III of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code. "Rules for Inservice Inspection of Nuclear Power Plant Components", ASME Boiler and Pressure Vessel Code, Section XI, (1974).
    • (1991) Code of Federal Regulation , Issue.50 PART
  • 3
    • 0342638701 scopus 로고    scopus 로고
    • Protection Against Non-Ductile Failure
    • "Fracture Toughness Requirements for Protection Against Pressurized Thermal Shock Events", Federal Register, Vol. 56, No. 94, Rules and Regulations, May 15,1991 and Code of Federal Regulation, Title 10, Part 50, Article 61, July 1991. "Protection Against Non-Ductile Failure", Appendix G to Section III of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code. "Rules for Inservice Inspection of Nuclear Power Plant Components", ASME Boiler and Pressure Vessel Code, Section XI, (1974).
    • Appendix G to Section III of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code
  • 4
    • 85041977608 scopus 로고
    • Rules for Inservice Inspection of Nuclear Power Plant Components
    • Section XI
    • "Fracture Toughness Requirements for Protection Against Pressurized Thermal Shock Events", Federal Register, Vol. 56, No. 94, Rules and Regulations, May 15,1991 and Code of Federal Regulation, Title 10, Part 50, Article 61, July 1991. "Protection Against Non-Ductile Failure", Appendix G to Section III of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code. "Rules for Inservice Inspection of Nuclear Power Plant Components", ASME Boiler and Pressure Vessel Code, Section XI, (1974).
    • (1974) ASME Boiler and Pressure Vessel Code
  • 6
    • 76749129332 scopus 로고
    • Research to Understand the Embrittlement Behavior of Yankee/BR3 Surveillance Plate and Other Outlier RPV Steels
    • ASTM STP 1270, David S. Gelles, Randy K. Nanstad, Arvind S. Kurnar and Edward A. Little, Editors, American Society for Testing and Materials, West Conshohocken, PA
    • Fabry, A., Van de Velde, J., Puzzolante, J.L., Van Ransbeeck T., Verstrepen A., Biemiller, B.C., Carter, R.G. and Petrova, T., "Research to Understand the Embrittlement Behavior of Yankee/BR3 Surveillance Plate and Other Outlier RPV Steels", Effects of Irradiation on Materials: 17th International Symposium, ASTM STP 1270, David S. Gelles, Randy K. Nanstad, Arvind S. Kurnar and Edward A. Little, Editors, American Society for Testing and Materials, West Conshohocken, PA, 1995.
    • (1995) Effects of Irradiation on Materials: 17th International Symposium
    • Fabry, A.1    Van De Velde, J.2    Puzzolante, J.L.3    Van Ransbeeck, T.4    Verstrepen, A.5    Biemiller, B.C.6    Carter, R.G.7    Petrova, T.8
  • 9
    • 0342638698 scopus 로고    scopus 로고
    • Embrittlement and Annealing of Reactor Pressure Vessel Steels: Comparison of BR3 Surveillance and Vessel Plates to the Surrogate Plates Representative of the Yankee Rowe Vessel
    • ASTM STP 1325, Randy K. Nanstad, Ed., American Society for Testing and Materials, West Conshohocken, PA
    • Fabry, A., Chaouadi, R., Puzzolante, J.L., Van de Velde, J., Biemiller, E.C., Rosinski S.T. and Carter R.G., "Embrittlement and Annealing of Reactor Pressure Vessel Steels: Comparison of BR3 Surveillance and Vessel Plates to the Surrogate Plates Representative of the Yankee Rowe Vessel", Effects of Radiation on Materials: 18th International Symposium, ASTM STP 1325, Randy K. Nanstad, Ed., American Society for Testing and Materials, West Conshohocken, PA, 1997.
    • (1997) Effects of Radiation on Materials: 18th International Symposium
    • Fabry, A.1    Chaouadi, R.2    Puzzolante, J.L.3    Van De Velde, J.4    Biemiller, E.C.5    Rosinski, S.T.6    Carter, R.G.7
  • 10
    • 4243710298 scopus 로고
    • In-service Embrittlement of the Pressure Vessel Welds at the Doel I and II Nuclear Power Plants
    • ASTM STP 1270, David S. Gelles, Randy K. Nanstad, Arvind S. Kumar and Edward A. Little, Editors, American Society for Testing and Materials, West Conshohocken, PA
    • Gérard R., Fabry A., Van de Velde J., Puzzolante J.L., Verstrepen A., Van Ransbeeck Th. and van Walle E., "In-service Embrittlement of the Pressure Vessel Welds at the Doel I and II Nuclear Power Plants", Effects of Irradiation on Materials: 17th International Symposium, ASTM STP 1270, David S. Gelles, Randy K. Nanstad, Arvind S. Kumar and Edward A. Little, Editors, American Society for Testing and Materials, West Conshohocken, PA, 1995.
    • (1995) Effects of Irradiation on Materials: 17th International Symposium
    • Gérard, R.1    Fabry, A.2    Van De Velde, J.3    Puzzolante, J.L.4    Verstrepen, A.5    Van Ransbeeck, Th.6    Van Walle, E.7
  • 11
    • 0005552070 scopus 로고
    • Radiation Embrittlement of Reactor Vessel Materials
    • Office of Nuclear Regulatory Research
    • U. S. Nuclear Regulatory Commission, Regulatory Guide 1.99 Revision 2, "Radiation Embrittlement of Reactor Vessel Materials", Office of Nuclear Regulatory Research, 1988.
    • (1988) Regulatory Guide 1.99 Revision 2
  • 12
    • 44949277755 scopus 로고
    • Family of Crack-Tip Fields Characterized by a Triaxiality Parameter: Part I- Structure of Fields
    • O'Dowd, N.P., and Shih, C.F., "Family of Crack-Tip Fields Characterized by a Triaxiality Parameter: Part I- Structure of Fields", Journal of the Mechanics and Physics of Solids, Vol.39, no 8, pp.989-1015, 1991 . Also: "Part II.-Fracture Applications", ibid., Vol. 40, pp. 939-963, 1992.
    • (1991) Journal of the Mechanics and Physics of Solids , vol.39 , Issue.8 , pp. 989-1015
    • O'Dowd, N.P.1    Shih, C.F.2
  • 13
    • 44949277755 scopus 로고
    • Part II.-Fracture Applications
    • O'Dowd, N.P., and Shih, C.F., "Family of Crack-Tip Fields Characterized by a Triaxiality Parameter: Part I- Structure of Fields", Journal of the Mechanics and Physics of Solids, Vol.39, no 8, pp.989-1015, 1991 . Also: "Part II.-Fracture Applications", ibid., Vol. 40, pp. 939-963, 1992.
    • (1992) Journal of the Mechanics and Physics of Solids , vol.40 , pp. 939-963
  • 14
    • 0026119623 scopus 로고
    • A Framework to Correlate a/W Ratio Effects on Elastic-Plastic Fracture Toughness (Jc)
    • Dodds, R.H., Anderson, T.L., and Kirk, M.T., "A Framework to Correlate a/W Ratio Effects on Elastic-Plastic Fracture Toughness (Jc)", International Journal of Fracture, Vol. 48, pp. 1-22, 1991.
    • (1991) International Journal of Fracture , vol.48 , pp. 1-22
    • Dodds, R.H.1    Anderson, T.L.2    Kirk, M.T.3
  • 15
    • 4243084176 scopus 로고
    • Effects of Prior Tearing on Cleavage Fracture Toughness in the Transition Region
    • ASTM STP 1244, M. Kirk and A. Bakker, Eds., American Society for Testing and Materials, West Conshohocken, PA
    • Dodds, R.H., Tang M. and Anderson, T.L., "Effects of Prior Tearing on Cleavage Fracture Toughness in the Transition Region", in Constraint Effects in Fracture, Theory and Application, ASTM STP 1244, M. Kirk and A. Bakker, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1993.
    • (1993) Constraint Effects in Fracture, Theory and Application
    • Dodds, R.H.1    Tang, M.2    Anderson, T.L.3
  • 16
    • 0027837628 scopus 로고
    • Simple Constraint Corrections for Subsize Fracture Toughness Specimens
    • ASTM STP 1204, W.R. Corwin, F.M. Haggag and W.L. Server, Eds., American Society for Testing and Materials, West Conshohocken, PA
    • Anderson, T.L. and Dodds, R.H., Jr., "Simple Constraint Corrections for Subsize Fracture Toughness Specimens", Small Specimen Test Techniques Applied to Nuclear Reactor Vessel Thermal Annealing and Life Extension, ASTM STP 1204, W.R. Corwin, F.M. Haggag and W.L. Server, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1993, pp. 93-105.
    • (1993) Small Specimen Test Techniques Applied to Nuclear Reactor Vessel Thermal Annealing and Life Extension , pp. 93-105
    • Anderson, T.L.1    Dodds Jr., R.H.2
  • 17
    • 0027287033 scopus 로고
    • Statistical Aspects of Constraint with Emphasis on Testing and Analysis of Laboratory Specimens in the Transition Region
    • ASTM STP 1171, Hackett, et.al., Eds., American Society for Testing and Materials, West Conshohocken, PA
    • Wallin, K. "Statistical Aspects of Constraint with Emphasis on Testing and Analysis of Laboratory Specimens in the Transition Region", in Constraint Effects in Fracture, ASTM STP 1171, Hackett, et.al., Eds., American Society for Testing and Materials, West Conshohocken, PA, pp.264-288, 1993.
    • (1993) Constraint Effects in Fracture , pp. 264-288
    • Wallin, K.1
  • 18
    • 0000945282 scopus 로고    scopus 로고
    • Constraint effects on fracture toughness of impact-loaded, precracked Charpy specimens
    • Koppenhoefer, K.C., and Dodds R.H. Jr., "Constraint effects on fracture toughness of impact-loaded, precracked Charpy specimens", Nuclear Engineering and Design, 162 (1996), 145-158.
    • (1996) Nuclear Engineering and Design , vol.162 , pp. 145-158
    • Koppenhoefer, K.C.1    Dodds Jr., R.H.2
  • 19
    • 0024778187 scopus 로고
    • Ic Correlation for Irradiation Embrittlement
    • The American Society of Mechanical Engineers, ASME
    • Ic Correlation for Irradiation Embrittlement", Innovative Approaches to Irradiation Damage and Fracture Analysis, PVP -Vol. 170, The American Society of Mechanical Engineers, ASME, (1989), pp.93-100.
    • (1989) Innovative Approaches to Irradiation Damage and Fracture Analysis , vol.170 PVP , pp. 93-100
    • Wallin, K.1
  • 22
    • 11744292085 scopus 로고
    • Reconstitution: Where do we stand ?
    • ASTM STP 1270, David S. Gelles, Randy K. Nanstad, Arvind S. Kumar and Edward A. Little, Editors, American Society for Testing and Materials, West Conshohocken, PA
    • van Walle, E., "Reconstitution: Where do we stand ?", Effects of Irradiation on Materials: 17th International Symposium, ASTM STP 1270, David S. Gelles, Randy K. Nanstad, Arvind S. Kumar and Edward A. Little, Editors, American Society for Testing and Materials, West Conshohocken, PA, 1995.
    • (1995) Effects of Irradiation on Materials: 17th International Symposium
    • Van Walle, E.1
  • 23
    • 0343508978 scopus 로고    scopus 로고
    • Fracture Toughness Measurements in the Transition Regime using Small Size Samples
    • New Orleans, Louisiana, American Society for Testing and Materials, West Conshohocken, PA
    • Chaouadi, R., "Fracture Toughness Measurements in the Transition Regime using Small Size Samples", ASTM Symposium on Small Specimen Test Techniques, New Orleans, Louisiana, American Society for Testing and Materials, West Conshohocken, PA, 1997.
    • (1997) ASTM Symposium on Small Specimen Test Techniques
    • Chaouadi, R.1
  • 24
    • 0343508977 scopus 로고    scopus 로고
    • Fracture Toughness Dreived from Small Circumferentially Cracked Bars
    • New Orleans, Louisiana, American Society for Testing and Materials, West Conshohocken, PA
    • Scibetta, M., "Fracture Toughness Dreived from Small Circumferentially Cracked Bars", ASTM Symposium on Small Specimen Test Techniques, New Orleans, Louisiana, American Society for Testing and Materials, West Conshohocken, PA, 1997.
    • (1997) ASTM Symposium on Small Specimen Test Techniques
    • Scibetta, M.1
  • 25
    • 0020783225 scopus 로고
    • Statistical Aspects of Cleavage Fracture in Steel
    • Evans, A.G., "Statistical Aspects of Cleavage Fracture in Steel", Metallurgical Transactions, Vol. 14A (1983), pp.1349-1355.
    • (1983) Metallurgical Transactions , vol.14 A , pp. 1349-1355
    • Evans, A.G.1
  • 26
    • 0020848522 scopus 로고
    • A Local Criterion for Cleavage Fracture of a Nuclear Pressure Vessel Steel
    • Beremin, F.M., "A Local Criterion for Cleavage Fracture of a Nuclear Pressure Vessel Steel", Metallurgical Transactions A, Vol. 14A, (1983),pp. 2277-2287.
    • (1983) Metallurgical Transactions A , vol.14 A , pp. 2277-2287
    • Beremin, F.M.1
  • 27
    • 0021303818 scopus 로고
    • Statistical Model for Carbide Induced Brittle Fracture in Steel
    • Wallin, K., Saario, T., and Torronen, K., "Statistical Model for Carbide Induced Brittle Fracture in Steel", Metal Science, Vol. 18, pp.13-16, 1984.
    • (1984) Metal Science , vol.18 , pp. 13-16
    • Wallin, K.1    Saario, T.2    Torronen, K.3
  • 28
    • 0023324774 scopus 로고
    • Stochastic Modeling of the Independent Roles of Particle Size and Grain Size in Transgranular Cleavage Fracture
    • Lin, T., Evans, A.G., and Ritchie, R.O., "Stochastic Modeling of the Independent Roles of Particle Size and Grain Size in Transgranular Cleavage Fracture", Metallurgical Transactions A, Vol. 18A, (1987), pp. 641-651.
    • (1987) Metallurgical Transactions A , vol.18 A , pp. 641-651
    • Lin, T.1    Evans, A.G.2    Ritchie, R.O.3
  • 29
    • 0024611779 scopus 로고
    • A Statistical Model for Low Temperature Cleavage Fracture in Mild Steels
    • Godse, R., and Gurland, J., "A Statistical Model for Low Temperature Cleavage Fracture in Mild Steels", Acta Metallurgica, Vol. 37 (1989), pp. 541-548.
    • (1989) Acta Metallurgica , vol.37 , pp. 541-548
    • Godse, R.1    Gurland, J.2
  • 30
    • 0026189021 scopus 로고
    • A tensile stress criterion for cleavage in precracked, notched and smooth bars
    • Xu, X.X., Cai, Q.C., and Su, Y., "A tensile stress criterion for cleavage in precracked, notched and smooth bars", International Journal of Fracture, 50, 51-65, 1991.
    • (1991) International Journal of Fracture , vol.50 , pp. 51-65
    • Xu, X.X.1    Cai, Q.C.2    Su, Y.3
  • 31
    • 0027692159 scopus 로고
    • Continuum and Micro-Mechanics Treatment of Constraint in Fracture
    • Dodds, R.H., Shih, C.F., and Anderson, T.L., "Continuum and Micro-Mechanics Treatment of Constraint in Fracture", International Journal of Fracture, Vol. 64, pp.101-133, 1993.
    • (1993) International Journal of Fracture , vol.64 , pp. 101-133
    • Dodds, R.H.1    Shih, C.F.2    Anderson, T.L.3
  • 32
    • 0015679766 scopus 로고
    • On the Relationship between Critical Tensile Stress and Fracture Toughness in Mild Steel
    • Ritchie, R.O., Knott J.F. and Rice, J.R., "On the Relationship between Critical Tensile Stress and Fracture Toughness in Mild Steel", Journal of Mechanics and Physics of Solids, Vol. 21, (1973), pp. 395-410.
    • (1973) Journal of Mechanics and Physics of Solids , vol.21 , pp. 395-410
    • Ritchie, R.O.1    Knott, J.F.2    Rice, J.R.3
  • 33
    • 0024929957 scopus 로고
    • Notch Root Strain and Stress Distributions in Power Hardening Materials
    • Xu X.X., Cai Q.G., Su Y. and Ma W.D., "Notch Root Strain and Stress Distributions in Power Hardening Materials", International Journal of Fracture, Vol. 41, (1989), pp. 275-282.
    • (1989) International Journal of Fracture , vol.41 , pp. 275-282
    • Xu, X.X.1    Cai, Q.G.2    Su, Y.3    Ma, W.D.4
  • 34
    • 0015160304 scopus 로고
    • An Elastic-Plastic Stress Analysis for a Notched Bar in Plane Strain Bending
    • Griffiths, J.R., and Owen, D.R.J., "An Elastic-Plastic Stress Analysis for a Notched Bar in Plane Strain Bending", Journal of Mechanics and Physics of Solids, Vol. 19, (1971), pp. 419-431.
    • (1971) Journal of Mechanics and Physics of Solids , vol.19 , pp. 419-431
    • Griffiths, J.R.1    Owen, D.R.J.2
  • 35
    • 0002749791 scopus 로고
    • Interpretation of Fracture Toughness in the Ductile-to-Brittle Transition Region by Fractographical Observations
    • ESIS/EGF9 (Edited by J.G. Blauel and K.H. Schwalbe) Mechanical Engineering Publications, London
    • Heerens, J., Read, D., Cornec, A., and Schwalbe, K.-H., "Interpretation of Fracture Toughness in the Ductile-to-Brittle Transition Region by Fractographical Observations", Defect Assessment in Components- Fundamentals and Applications, ESIS/EGF9 (Edited by J.G. Blauel and K.H. Schwalbe) 1991, Mechanical Engineering Publications, London, pp. 659-678.
    • (1991) Defect Assessment in Components- Fundamentals and Applications , pp. 659-678
    • Heerens, J.1    Read, D.2    Cornec, A.3    Schwalbe, K.-H.4
  • 36
    • 0029632031 scopus 로고
    • Evaluation of Elastic-Plastic Fracture Toughness Testing in the Transition Region through Japanese Interlaboratory Tests
    • ASTM STP 1207, John D. Landes, Donald E. McCabe, and J.A.M. Boulet, Eds., American Society for Testing and Materials, West Conshohocken, PA
    • Iwadate, T. and Yokobori, T., "Evaluation of Elastic-Plastic Fracture Toughness Testing in the Transition Region through Japanese Interlaboratory Tests", Fracture Mechanics: Twenty-Fourth Volume, ASTM STP 1207, John D. Landes, Donald E. McCabe, and J.A.M. Boulet, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1994, pp. 233-263.
    • (1994) Fracture Mechanics: Twenty-Fourth Volume , pp. 233-263
    • Iwadate, T.1    Yokobori, T.2
  • 38
    • 0016554231 scopus 로고
    • Effect of Strain Rate and Temperature on the Tensile Properties of Irradiated ASTM A533-B Steel
    • and references listed therein
    • Steichen, J.M., and Williams, J.A., "Effect of Strain Rate and Temperature on the Tensile Properties of Irradiated ASTM A533-B Steel", Journal of Nuclear Materials, Vol. 57, (1975), pp. 303-311, and references listed therein.
    • (1975) Journal of Nuclear Materials , vol.57 , pp. 303-311
    • Steichen, J.M.1    Williams, J.A.2
  • 39
    • 0015205636 scopus 로고
    • Fracture and Tensile Behavior of Neutron-Irradiated A533-B Pressure Vessel Steel
    • Hunter, C.W., and Williams, J.A., "Fracture and Tensile Behavior of Neutron-Irradiated A533-B Pressure Vessel Steel", Nuclear Engineering and Design, Vol. 17, (1971), pp. 131-148.
    • (1971) Nuclear Engineering and Design , vol.17 , pp. 131-148
    • Hunter, C.W.1    Williams, J.A.2
  • 41
    • 85168991308 scopus 로고
    • Radiation Effects on the Metallurgical Fracture Parameters and Fracture Toughness of Pressure Vessel Steels
    • ASTM STP 484, American Society for Testing and Materials, West Conshohocken, PA
    • Wullaert, R.A., Ireland, D.R., and Tetelman, A.S., "Radiation Effects on the Metallurgical Fracture Parameters and Fracture Toughness of Pressure Vessel Steels", Irradiation Effects on Structural Alloys for Nuclear Reactor Applications, ASTM STP 484, American Society for Testing and Materials, West Conshohocken, PA, (1970), pp. 20-41.
    • (1970) Irradiation Effects on Structural Alloys for Nuclear Reactor Applications , pp. 20-41
    • Wullaert, R.A.1    Ireland, D.R.2    Tetelman, A.S.3
  • 42
    • 0343258756 scopus 로고
    • Investigations on Microscopic Cleavage Fracture Stress
    • J.C. Giovanola and A.J. Rosakis, Eds., American Society of Mechanical Engineers
    • Jude-Esser, C., Grimpe, F. and Dahl, W., "Investigations on Microscopic Cleavage Fracture Stress", in Advances in Local Fracture/Damage Models for the Analysis of Engineering Problems, AMD-Vol.137, pp. 1027-1033, J.C. Giovanola and A.J. Rosakis, Eds., American Society of Mechanical Engineers, 1992.
    • (1992) Advances in Local Fracture/Damage Models for the Analysis of Engineering Problems , vol.137 AMD , pp. 1027-1033
    • Jude-Esser, C.1    Grimpe, F.2    Dahl, W.3
  • 43
    • 0342824007 scopus 로고
    • Microstructural Control of Cleavage Fracture in an A508 Class 3 Pressure Vessel Steel
    • ASTM STP 1131, H.A. Ernst, A. Saxena, and D.L. McDowell, Eds., American Society for Testing and Materials, West Conshohocken, PA
    • Druce S.G., Gibson G.P. and Capel M., "Microstructural Control of Cleavage Fracture in an A508 Class 3 Pressure Vessel Steel", Fracture Mechanics:Twenty-Second Symposium (VolumeI), ASTM STP 1131, H.A. Ernst, A. Saxena, and D.L. McDowell, Eds., American Society for Testing and Materials, West Conshohocken, PA, (1992), pp. 682-706.
    • (1992) Fracture Mechanics:Twenty-Second Symposium , vol.1 , pp. 682-706
    • Druce, S.G.1    Gibson, G.P.2    Capel, M.3
  • 44
    • 0022727494 scopus 로고
    • Effects of Microstructure on Cleavage Fracture in Pressure Vessel Steel
    • Bowen P., Druce S.G. and Knott J.F., "Effects of Microstructure on Cleavage Fracture in Pressure Vessel Steel", Acta Metallurgica, Vol. 34, (1986), pp. 1121-1131.
    • (1986) Acta Metallurgica , vol.34 , pp. 1121-1131
    • Bowen, P.1    Druce, S.G.2    Knott, J.F.3
  • 49
    • 0343694454 scopus 로고
    • v and Drop-Weight Transition Temperature Increase Caused by Irradiation
    • ASTM STP 1046, N.H. Packan, R.E. Stoller and A.S. Kumar, Eds., American Society for Testing and Materials, West Conshohocken, PA
    • v and Drop-Weight Transition Temperature Increase Caused by Irradiation", Effects of Radiation on Materials: 14th International Symposium (Vol.II), ASTM STP 1046, N.H. Packan, R.E. Stoller and A.S. Kumar, Eds., American Society for Testing and Materials, West Conshohocken, PA, (1990), pp. 373-384.
    • (1990) Effects of Radiation on Materials: 14th International Symposium , vol.2 , pp. 373-384
    • Schmitt, F.J.1
  • 50
    • 5544315649 scopus 로고
    • Comparison of Drop-Weight and Instrumented Charpy Impact Test Results for Irradiated RPV Steels
    • ASTM STP 1175, A. S. Kumar, D. S. Gelles, R. K. Nanstad, and E. A. Little, Eds., American Society for Testing and Materials, West Conshohocken, PA
    • Pachur D., "Comparison of Drop-Weight and Instrumented Charpy Impact Test Results for Irradiated RPV Steels", Effects of Radiation on Materials: 16th International Symposium, ASTM STP 1175, A. S. Kumar, D. S. Gelles, R. K. Nanstad, and E. A. Little, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1993.
    • (1993) Effects of Radiation on Materials: 16th International Symposium
    • Pachur, D.1


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.