Specifications and performance experience of pool boiling cooled magnets

Cryogenics

Volumn 38, Issue 11, 1998, Pages 1145-1153

  Satow, T ^a  

^a NATIONAL INSTITUTE FOR FUSION SCIENCE   (Japan)

Author keywords

Electrical insulation; Large Helical Device; Pool boiling cooled magnets

Indexed keywords

BOILING LIQUIDS; COOLING; CRYOGENIC LIQUIDS; ELECTRIC BREAKDOWN; ELECTRIC COILS; ELECTRIC CURRENTS; ELECTRIC ENERGY STORAGE; ELECTRIC EQUIPMENT PROTECTION; ELECTRIC INSULATION; ELECTRIC POTENTIAL; ELECTRIC WINDINGS; HELIUM;

POOL BOILING COOLED MAGNETS; SUPERONDUCTING MAGNET INSULATION;

SUPERCONDUCTING MAGNETS;

EID: 0032208648     PISSN: 00112275     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0011-2275(98)00102-7     Document Type: Article

References (53)

1. Kantrowitz, A.R. and Stekly, Z.J.J., New principle for the construction of stabilized superconducting coils. Applied Physics Letters, 1965, 6(3), 56.
2. Stekly, Z.J.J., The performance of stabilized Nb-Zr wire in coils. IEEE Transactions on Magnetics, 1966, MAG-2(3), 319.
3. Iwamoto, M., Satow, T., Komata, T., Ogino, O. and Ishihara, K., 75 kG large superconducting magnet (in Japanese). Cryogenic Engineering, 1970, 5(2), 69.
4. Iwamoto, M., Satow, T., Tanaka, M., Ogino, O., Akashi, K., Ishihara, K. and Fushimi, K., Horizontal dipole superconducting magnet using multilayer insulation. In Proceedings of the 4th International Conference on Magnet Technology, Brookhaven, CT, 1972, p. 237.
5. Aiyama, Y., Fushimi, K., Yasukochi, K., Kasahara, T., Saito, R., Tada, N., Kimura, H. and Sato, S., A large superconducting MHD magnet. In Proceedings of the 5th International Cryogenic Engineering Conference, Kyoto, 1974, p. 300.
6. Shimamoto, S., Ando, T., Hiyama, T., Tsuji, H., Tada, E., Nishi, M., Yoshida, K., Okuno, K., Koizumi, Y., Takahashi, Y., Kato, T., Oka, K., Ibaraki, Y., Sanada, Y. and Yasukochi, K., Construction and operation of the cluster test facility. IEEE Transactions on Magnetics, 1981, MAG-17(1), 494.
7. Wang, S.T., Ludwig, H., Lieberg, M., Genens, L., Johanson, E., Nixon, J., Gacek, D., Kraft, E., Kotora, J., Sajdak, W., Morrison, J. and Takagi, T., Fabrication experience of the coal-fired flow facility superconducting dipole magnet. IEEE Transactions on Magnetics, 1981, 17(5), 2190.
8. Kozman, T.A., Chang, Y., Dalder, E.N.C., Hanson, C.L., Hincle, R.E., Horvath, J.A., Montoya, C.R., Ng, D., Owen, E.O., Palasek, B., Skinner, D.W., Van Sant, J.H., Wang, S.T., Berkey, J.H., Cone, R.S., Patrick, R.E. and Tirapelle, P.N., Testing of the MFTF magnets. In Proceedings of the 9th International Cryogenic Engineering Conference, Kobe, 1982, p. 434.
9. Inagaki, T., Doi, Y., Hirabayashi, H., Kato, Y., Kawano, K., Sato, H., Sugimoto, S., Takamatsu, K., Takasaki, E., Tsuru, T., Yoshimura, H., Asai, O. and Satow, T., Large aperture superconducting magnet [Benkei]. Cryogenics, 1984, 24(2), 83.
10. Nakamura, Y., Hiraki, N., Nakamura, K., Tanaka, M., Nagao, A., Kawasaki, S. and Itoh, S., Performance tests of the superconducting toroidal field coils for TRIAM-IM (in Japanese). Bulletin of Research Institute for Applied Mechanics Kyushu University, 1984, 60, 319.
11. Okamura, T., Kabashima, S., Shioda, S. and Sawada, Y., Superconducting magnet for a disc generator of the FUJI-1 MHD facility. Cryogenics, 1985, 25(9), 483.
12. Okuno, K., Kato, T., Koizumi, K., Tsuji, H., Hiyama, T., Shimamoto, S., Hattori, Y., Kamiya, S., Mukai, H. and Iida, F., Testing of the pool-boiling cooled Japanese LCT coil in the international fusion superconducting magnet test facility. IEEE Transactions on Magnetics, 1987, MAG-23(2), 1683.
13. Shen, S.S., Dresner, L., Lubell, M.S., Lue, J.W., Luton, J.N., McManamy, T.J., Wilson, C.T. and Wintenberg, R.E., Test results of the U.S. LCT pool-boiling coils in the international fusion superconducting magnet test facility (IFSMTF). IEEE Transactions on Magnetics, 1988, 24(2), 783.
14. Satow, T., Yamamoto, J., Takahata, K., Imagawa, S., Tamura, H., Yanagi, N., Mito, T., Nishimura, A., Satoh, S., Yamazaki, K., Kaneko, H., Yonezu, H., Hayashi, H., Takeo, M. and Motojima, O., LHD design group, present status of design and manufacture of the superconducting magnets for the Large Helical Device. IEEE Transactions on Applied Superconductivity, 1993, 3(1), 365.
15. Imagawa, S., Yanagi, N., Satow, T., Yamamoto, J., Motojitma, O. and LHD Group, Optimization of wetted surface fraction of helical coil for LHD. Cryogenics (ICEC Suppl.), 1994, 34, 701.
16. Imagawa, S., Masuzaki, S., Yanagi, N., Yamaguchi, S., Satow, T., Yamamoto, J., Motojima, O., LHD Group, Nakanishi, K., Uchida, K., Yamagiwa, T., Yamamoto, T. and Asano, K., Accuracy of superconducting helical coils for LHD. Fusion Technology, 1996, 1027.
17. Desportes, H., Le Bars, J. and Mayaux, G., Construction and test of the CELLO thin-wall solenoid. Advances in Cryogenic Engineering, 1980, 25, 175.
18. Mori, S., Yoshizaki, R., Kawakami, H., Kondo, K., Hirabayashi, H., Morimoto, K., Wake, M., Yamamoto, A., Aihara, K., Kazawa, Y., Kimura, H., Miyake, Y., Ogata, H., Saito, R., Suzuki, S., Kephart, R. and Yamada, R., Construction and testing of superconducting solenoid magnet model for colliding beam detector. Advances in Cryogenic Engineering, 1982, 27, 151.
19. Yamamoto, A., Kimura, N., Kichimi, H., Inoue, H., Yamaoka, H., Mito, T., Hirabayashi, H., Ikeda, M., Ohish, K., Shiba, E., Sato, T., Okada, I. and Shiozawa, S., Test results of the TOPAZ thin superconducting solenoid wound with the internal winding method. In Proceedings of the 9th International Conference on Magnet Technology, Zurich, Switzerland, 1985, p. 167.
20. Wake, M., Sakuda, M., Matsui, T., Ishihara, N., Maehata, K., Doi, Y., Ishibashi, K., Satow, T. and Hirabayashi, H., Excitation of a superconducting large thin solenoid magnet. IEEE Transactions on Magnetics, 1987, MAG-23(2), 1236.
21. Yamaoka, H., Yamamoto, A., Makida, Y., Kimura, N., Tanaka, K., Hirabayashi, H., Ruber, R., Calen, H., Takasu, N., Doi, T. and Abe, S., A thin superconducting solenoid magnet for the WASA detector. IEEE Transactions on Magnetics, 1996, 32(4), 2151.
22. Singh, S.K., Gaberson, P.C., Hordubay, T.D., Young, J.L. and Jarabak, A.J., Advantages of the distributed structure concept of the Westinghouse LCP coil design. In Proceedings of the 10th Symposium on Fusion Engineering, Philadelphia, PA, 1983, 1752.
23. Tsuji, H., Okuno, K., Nakajima, H., Ando, T., Takahashi, Y., Nishi, M., Yoshida, K., Tada, E., Koizumi, K., Kato, T., Isono, T., Oshikiri, M., Hiyama, T., Kawano, K., Yamamura, H., Sato, M., Yoshida, J., Itoh, N., Shimamoto, S., Satow, T. and Ichihara, T., Recent progress in the demo poloidal coil program. IEEE Transactions on Magnetics, 1989, 25(2), 1484.
24. Hamajima, T., Tanaka, A., Shiraki, H., Shibui, M., Sanada, Y., Nagamura, M., Shimada, M., Fujioka, T., Nishi, M., Nakajima, H., Koizumi, K., Takahashi, Y., Ando, T., Tsuji, H. and Shimamoto, S., Development of a forced-cooled superconducting coil with high average current density (DPC-TJ). IEEE Transactions on Magnetics, 1989, 25(2), 1721.
25. Steeves, M.M., Painter, T.A., Takayasu, M., Randall, R.N., Tracey, J.E., Hwang, I.S. and Hoenig, M.O., The US demonstration poloidal coil. IEEE Transactions on Magnetics, 1991, 27(2), 2369.
26. 3Sn US-demonstration poloidal coil. Advances in Cryogenic Engineering, 1992, 37(Part A), 345.
27. Nakamoto, K., Yamamoto, T., Mizumaki, S., Yamakoshi, T., Kanai, Y., Yamamoto, K., Wachi, Y., Ushijima, M., Yoshida, T., Kai, T., Takahata, K., Yamamoto, J., Satow, T. and Motojima, O., Design and fabrication of forced-flow superconducting poloidal coils for the large helical device. Fusion Technology, 1994, 909.
28. Satow, T., Mito, T., Takahata, K. et al., Cooling and excitation experiments of a single inner vertical coil (EXSIV) for the Large Helical Device. In Proceedings of the 16th International Cryogenic Engineering Conference/International Cryogenic Materials Conference, Kitakyushu, 1996, p. 735.
29. Satow, T., Masada, E., Murakami, Y., Tsukamoto, O., Ogiso, K., Neo, S. and Motoshima, N., Present status of 480 MJ/40 MW SMES development project. In International Conference on Electrical Engineering '97, Matsue, 1997, p. 122.
30. Hsieh, S.Y., Allinger, J., Danby, G., Keane, J., Powell, J. and Prodell, A., A survey of failure experience in existing superconducting magnet systems and its relevance to fusion power reactors. IEEE Transactions on Magnetics, 1977, MAG-13(1), 90.
31. Satow, T., Iwamoto, M., Toyoda, K., Ogasawara, T., Kubota, Y., Makiura, T., Yasukochi, K., Momota, H., Sato, K., Yamada, S., Koyama, K. and Onishi, T., Superconducting poloidal coils for the reacting plasma project: test results of a model coil (RPC-I) at a 200 T/sec pulsing rate and design of a new coil (RPC-II). IEEE Transactions on Magnetics, 1983, 19(3), 1406.
32. Bessette, D., Ciazynski, D., Duchateau, J.L., Riband, P. and Turck, B., Story of damaged BT 17 coil of the TF superconducting magnet of Tore Supra. Fusion Technology, 1990, 1659.
33. Turck, B., Six years of operating experience with Tore Supra, the largest Tokamak with superconducting coils. IEEE Transactions on Magnetics, 1996, 32(4), 2264.
34. Dawson, A.M. and Montgomery, D.B., A data base of magnet failures and its relevance to magnet design. IEEE Transactions on Magnetics, 1996, 32(4), 2974.
35. Satow, T., Safety analysis of superconducting magnets (in Japanese). Journal of Plasma and Fusion Research, 1997, 73(8), 790.
36. Hara, M., Miyama, M., Irie, F., Tsutsumi, K., Satow, T., Gerhold, J. and Telser, E., Insulation design philosophy of superconducting coils for electric power apparatus and a case study for KEPCO's SMES. In 9th International Symposium on High Voltage Engineering, Graz, Austria, 1995, p. 7874.1.
37. Hara, M., Miyama, M., Satow, T. and Gerhold, J., Insulation design of pool-boiling He-cooled superconducting coils: coil parameters affecting insulation spacing. IEEE Transactions on Dielectrics and Electrical Insulation, 1997, 4(6), 792.
38. Yanagi, N., Mito, T., Imagawa, S., Satow, T. et al., Development, fabrication, testing and joints of aluminum stabilized superconductors for the helical coils of LHD. In Proceedings of the 16th International Cryogenic Engineering Conference/International Cryogenic Materials Conference, Kitakyushu, 1996, p. 751.
39. Satow, T., Iwamoto, M., Hattori, Y. and Fukuhara, K., Optimal coil current and maximum current density in a fully stabilized superconducting coil (in Japanese). In 19th Meeting on Cryogenics, Tokyo, 1977, p. 14.
40. Satow, T., Optimization of rated currents in cryogenically stabilized superconducting magnets (in Japanese). In Handbook of Superconductivity and Cryogenics. OHM Co, 1993, p. 570.
41. Satow, T., Study of high current density and high stability in superconducting magnets (in Japanese). Doctoral thesis, Kyushu University, 1996, p. 120.
42. Satow, T., Design philosophy and insulation design for superconducting coils (in Japanese). Journal of the Japan Research Group of Electrical Discharges, 1996, 152, 86.
43. Turck, B., Stability and protection of tore supra superconducting coils. Cryogenics, 1991, 31, 629.
44. Satow, T., Scaling law of winding current density and coil current (in Japanese). Technical report N. 664 of the Institute of Electrical Engineers of Japan, 1998, p. 79.
45. Motojima, O., LHD magnet system design and construction. Fusion Technology, 1993, 26, 437.
46. Yamamoto, J. and LHD Group, Superconducting coil system for the LHD and its R&D. In Proceedings of the 16th International Cryogenic Engineering Conference/International Cryogenic Materials Conference, Kitakyushu, 1996, p. 731.
47. Imagawa, S., Yanagi, N., Yamaguchi, S., Satow, T., Yamamoto, J., Motojima, O., Senba, T., Suzuki, S., Nakanishi, K., Asano, K. and Yamagiwa, T., Construction of helical coil winding machine for LHD and on-site winding. IEEE Transactions on Magnetics, 1996, 32(4), 2248.
48. Yamada, S., Mito, T., Chikaraishi, H., Maekawa, R., Tanahashi, S., Kitagawa, S., Nishimura, K., Uede, T., Hiue, H., Yasukawa, Y., Itoh, I., Sakaki, K., Satow, T., Yamamoto, J., Motojima, O. and LHD Group, Design and components test results of the superconducting current feeder system for the LHD. Fusion Technology, 1990, 1023.
49. Hara, M., Suehiro, J. and Matsumoto, H., Breakdown characteristics of cryogenic gaseous helium in uniform electric field and space charge modified non-uniform field. Cryogenics, 1990, 30(9), 787.
50. Hoshino, M., Satow, T., Chikaraishi, H., Yamamoto, J., Motojima, O., Minoda, A., Nagao, M., Kosaki, M. and Hara, M., Breakdown characteristics of plane electrodes having spacers in cryogenic gaseous helium. In IEEE 1995 Annual Report, Conference on Electrical Insulation and Dielectric Phenomena, Virginia Beach, USA, 1995, p. 451.
51. Hoshino, M., Satow, T., Chikaraishi, H., Yanagi, N., Yamamoto, J., Motojima, O., Minoda, A., Nagao, M., Kosaki, M. and Hara, M., Breakdown characteristics of plane electrodes having spacers in cryogenic gaseous helium (in Japanese). Transactions of the Institute of Electrical Engineers of Japan, 1995, 115-A(12), 1243.
52. Hara, M., Suehiro, J., Tachibana, Y., Takeo, M., Kosaki, M., Hashino, M., Satow, T., Yamamoto, J. and Motojima, O., Breakdown characteristics of pressurized superfluid HeII. In 8th International Symposium on High Voltage Engineering, Yokohama, 1993, p. 559.
53. Hara, M., Suehiro, J., Tachibana, Y., Takeo, M., Kosaki, M., Satow, T. and Motojima, O., Breakdown characteristics and prebreakdown phenomena of pressurized superfluid helium (in Japanese). Transactions of the Institute of Electrical Engineers of Japan, 1995, 14-A(4), 296.