Analyses of tensile failure properties of asphalt-mineral filler mastics

Journal of Materials in Civil Engineering

Volumn 10, Issue 4, 1998, Pages 256-262

  Chen, Jian Shiuh ^a   Peng, Chun Hsiang ^a  

^a NATIONAL CHENG KUNG UNIVERSITY   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

ASPHALT; BINDERS; BRITTLENESS; CRACK INITIATION; DUCTILITY; PAVEMENTS; STRAIN; TENSILE STRESS; TENSILE TESTING;

ASPHALT-MINERAL FILLER MASTICS;

FILLERS;

EID: 0032207231     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(1998)10:4(256)     Document Type: Article

References (36)

1. Abraham, H. (1945). Asphalts and allied substances, 5th Ed., D. Van Nostrand Co. Inc., new York.
2. Allen, T. (1968). Particle size measurement. Chapman & Hall, Ltd., London, U.K.
3. Anderson, D. A. (1987). "Guidelines for use of dust in hot-mix asphalt concrete mixture." Proc. Assn. of Asphalt Paving Technologists, 56, 492-516.
4. Anderson, D. A., Dongre, R., Christensen, D. W., and Dukatz, E. L. (1992). "Effects of minus no. 200-sized aggregate on fracture behavior of dense-graded hot-mix asphalt." Effects of aggregates and mineral fillers on asphalt mixture performance, ASTM STP 1147, ASTM, Philadelphia, Pa., 154-176.
5. Bellin, P. A. F. (1992). "Use of stone mastic asphalt in Germany, state-of-the-art." Preprint for 71st TRB Annu. Meeting 1992, Transportation Research Board, Washington, D.C.
6. Berlin, A. A., Volfson, S. A., Enikolopian, N. S., and Negmatov, S. S. (1986). Principles of polymer composites. Springer-Verlag, New York.
7. Bigg, D. M. (1987). "Mechanical properties of particulate filled polymers." Polymer Composites, 8, 115-121.
8. Bills, E. K., Sweenly, K. H., and Salcedo, F. S. (1960). "The tensile properties of highly filled systems - effect of filler volume concentration." J. Appl. Polymer Sci., 4, 259-268.
9. Chacko, V. P., Karasz, F. E., and Farris, R. J. (1982). "Dynamic mechanical behavior of filled polyethylene and model composition." Polymer Engrg. and Sci., 22, 968-974.
10. Craus, J., Ishai, I., and Sides, A. (1978). "Some physico-chemical aspects of the effect and role of the filler in bituminous paving mixtures." Proc. Assn. of Asphalt Paving Technologists, 47, 558-588.
11. Ferrigno, T. H. (1987). "Principles of filler selection and use." Handbook of fillers for plastics, H. S. Katz and I. V. Milewski, eds., Van Nostrand Reinhold, New York, 8-61.
12. Fritschy, G., and Papirer, E. (1979). "Dynamic-mechanical properties of a bitumen-silica composite. I: Relation with filler content and bitumen-silica interfacial area." Rheologica Acta, 28, 749-755.
13. Fritschy, G., and Papirer, E. (1980). "Dynamic-mechanical properties of a bitumen-silica composite. IV: Calculation of and influence of the silica upon the mean relaxation times." Rheological Acta, 19, 314-317.
14. Goodier, J. N. (1933). "Concentration of stress around spherical and cylindrical inclusions and flaws." J. Appl. Mech., 55, 39-44.
15. Herrmann, K. P., and Ferber, F. (1989). "Elementary failure mechanics in thermally stressed models of fiber reinforced composite." Brittle matrix composites. Vol. II, A. M. Brandt and I. H. Marshall, eds., Elsevier Applied Science, New York, 1-19.
16. Highley, D. E. (1977). Silica. Her Majesty's Stationery Office, London, U.K.
17. Hoiberg, A. J. (1964). Bituminous materials: Asphalts, tars, and pitches. Interscience Publishers, New York.
18. Hough, B. K. (1957). Basic soils engineering. Ronald Press, New York.
19. Huschek, S., and Angst, C. (1980). "Mechanical properties of filler-bitumen mixes at high and low service temperature." Proc. Assn. of Asphalt Paving Technologists, 50, 440-473.
20. Ishai, T., and Craus, J. (1977). "Effect of the filler on aggregate-bitumen adhesion properties in bituminous mixture." Proc. Assn. of Asphalt Paving Technologists, 47, 228-258.
21. Kandhal, P. S. (1981). "Evaluation of baghouse fines in bituminous paving mixture." Proc. Assn. of Asphalt Paving Technologists, 50, 150-210.
22. Kennepohl, G. J., and Davidson, J. K. (1992). "Introduction of stone mastic asphalt (SMA) in Ontario." J. Assn. of Asphalt Paving Technologists, 61, 231-253.
23. Leidner, J., and Woodhams, R. T. (1974). "The strength of polymeric composites containing spherical filler." J. Appl. Polymer Sci., 18, 1639-1654.
24. Little, D. N., Button, J. W., and White, R. M., Ensley, E. K., Kim, Y., and Ahmed, S. J. (1987). "Investigation of asphalt additives." FHWA-RD-87-001, Federal Highway Administration, McLean, Va.
25. 3 composites." J. Appl. Polymer Sci., 42, 3101-3110.
26. Mitchell, J. G., and Lee, A. R. (1939). "Evaluation of fillers for tar and other bituminous surfacing." J. Soc. of Chemical Industry, 58, 299-306.
27. Nicolais, L., and Narkis, M. (1971). "Stress-strain behavior of styrene-acrylonitrile/glass bend composite in the glassy region." Polymer Engrg. and Sci., 11, 194-198.
28. Nicolais, L., and Nicodemo, L. (1973). "Strength of particulate composite." Polymer Engrg. and Sci., 13, 469.
29. Nielsen, L. E. (1974). Mechanical properties of polymers and composite. Marcel Dekker, Inc., New York.
30. Petersen, J. C., Plancher, H., and Harnsberger, P. M. (1987). "Lime treatment of asphalt to reduce age hardening and improve flow properties." Proc. Assn. of Asphalt Paving Technologists, 56, 632-653.
31. Rigden, P. J. (1947). "The use of fillers in bituminous road surfacing." J. Soc. of Chemical Industry, 66(Sept.), 299-309.
32. Scherocman, J. A. (1992). "Construction of stone mastic asphalt test sections in the U.S." J. Assn. of Asphalt Paving Technologists, 61, 642-664.
33. Terrel, R. L., and Epps, J. A. (1990). Asphalt modifiers. National Asphalt Pavement Association, Lanham, Md.
34. Warden, W. B., Hudson, S. B., and Howell, H. C. (1959). "Evaluation of mineral fillers in terms of practical pavement performance." Proc. Assn. of Asphalt Paving Technologists, 28, 316.
35. Welch, B. H., and Wiley, M. L. (1977). "Effects of hydrated lime on asphalt and aggregate mixture." Transp. Res. Rec. 659, Transportation Research Board, Washington, D.C., 44-45.
36. Winniford, R. S. (1961). "The rheology of asphalt-filler systems as shown by the microviscometer." ASTM STP 309, ASTM, Philadelphia, Pa., 109-210.