Effects of stream surface inclination on tip leakage flow fields in compressor rotors

Journal of Turbomachinery

Volumn 120, Issue 4, 1998, Pages 683-692

  Furukawa, M ^a   Saiki, K ^a   Nagayoshi, K ^a   Kuroumaru, M ^a   Inoue, M ^a  

^a KYUSHU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

AXIAL FLOW TURBOMACHINERY; BOUNDARY LAYER FLOW; LEAKAGE (FLUID); ROTORS; TURBOMACHINE BLADES; VORTEX FLOW;

TIP LEAKAGE FLOW FIELDS;

COMPRESSORS;

AXIAL COMPRESSOR; COMPRESSOR; LEAKAGE; ROTOR; VORTEX;

EID: 0032194368     PISSN: 0889504X     EISSN: 15288900     Source Type: Journal    
DOI: 10.1115/1.2841777     Document Type: Article

References (38)

1. Adamczyk, J. J., Celestina, M. L., and Greitzer, E. M., 1993, “The Role of Tip Clearance in High-Speed Fan Stall,” ASME Journal of Turbomachinery, Vol. 115, pp. 28-38.
2. Anderson, W. K., Thomas, J. L„ and van Leer, B., 1986, “Comparison of Finite Volume Flux Vector Splittings for the Euler Equations,” AIAA Journal, Vol. 24, pp. 1453-1460.
3. Baldwin, B. S., and Lomax, H., 1978, “Thin Layer Approximation and Algebraic Model for Separated Turbulent Flow,” AIAA Paper No. 78-257.
4. Chakravarthy, S. R., 1986, “The Versatility and Reliability of Euler Solvers Based on High-Accuracy TVD Formulations,” AIAA Paper No. 86-0243.
5. Chen, G. T., Greitzer, E. M., Tan, C. S., and Marble, F. E., 1991, “Similarity Analysis of Compressor Tip Clearance Flow Structure,” ASME Journal of Turbomachinery, Vol. 113, pp. 260-271.
6. Dawes, W. N., 1987, “A Numerical Analysis of the Three-Dimensional Viscous Flow in a Transonic Compressor Rotor and Comparison With Experiment,” ASME Journal of Turbomachinery, Vol. 109, pp. 83-90.
7. Foley, A. C., and Ivey, P. C., 1996, “Measurement of Tip-Clearance Flow in a Multistage, Axial Flow Compressor,” ASME Journal of Turbomachinery, Vol. 118, pp. 211-217.
8. Furukawa, M., Yamasaki, M., and Inoue, M., 1991, “A Zonal Approach for Navier-Stokes Computations of Compressible Cascade Flow Fields Using a TVD Finite Volume Method,” ASME Journal of Turbomachinery, Vol. 113, pp. 573-582.
9. Furukawa, M., Nakano, T., and Inoue, M., 1992, “Unsteady Navier-Stokes Simulation of Transonic Cascade Flow Using an Unfactored Implicit Upwind
10. Relaxation Scheme With Inner Iterations,” ASME Journal of Turbomachinery, Vol. 114, pp. 599-606.
11. Furukawa, M., Inoue, M., Kuroumaru, M., and Saiki, K., 1995a, “Behavior of Tip Leakage Flow in a Diagonal Flow Impeller With High Specific Speed,” Proc. 1995 Yokohama International Gas Turbine Congress, Vol. 1, pp. 109-114.
12. Furukawa, M., Saiki, K., and Inoue, M., 1995b, “Numerical Simulation of Three-Dimensional Viscous Flow in Diagonal Flow Impeller,” in: Numerical Simulations in Turbomachinery, ASME FED-Vol. 227, pp. 29-36.
13. Goto, A., 1992a, “Study of Internal Flows in a Mixed-Flow Pump Impeller at Various Tip Clearances Using Three-Dimensional Viscous Flow Computations,” ASME Journal of Turbomachinery, Vol. 114, pp. 373-382.
14. Goto, A., 1992b, “The Effect of Tip Leakage Flow on Part-Load Performance of a Mixed-Flow Pump Impeller,” ASME Journal of Turbomachinery, Vol. 114, pp. 383-391.
15. Hah, C., 1986, “A Numerical Modeling of Endwall and Tip-Clearance Flow of an Isolated Compressor Rotor,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 108, pp. 15-21.
16. Inoue, M., Ikui, T., Kamada, Y., and Tashiro, M., 1980, “A Quasi-Three-Dimensional Design of Diagonal Flow Impellers by Use of Cascade Data,” Proc. 10th Symposium, The International Association for Hydraulic Research, Vol. 1, pp. 403-414.
17. Inoue, M., Wu, K.-C., Kuroumaru, M., Furukawa, M., Fukuhara, M., and Ikui, T., 1984, “A Design of Diagonal Impeller by Means of SCM and Cascade Data,” Proc. China-Japan Joint Conference on Hydraulic Machinery and Equipment, Vol. 1, pp. 21-30.
18. Inoue, M., Kuroumaru, M., and Fukuhara, M., 1986, “Behavior of Tip Leakage Flow Behind an Axial Compressor Rotor,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 108, pp. 7-14.
19. Inoue, M., and Kuroumaru, M., 1989, “Structure of Tip Clearance Flow in an Isolated Axial Compressor Rotor,” ASME Journal of Turbomachinery, Vol. III, pp. 250-256.
20. Inoue, M., and Furukawa, M., 1994, “Artificial Dissipative and Upwind Schemes for Turbomachinery Blade Flow Calculations,” VKI, Lecture Series, No. 1994-06.
21. Kang, S., and Hirsch, C., 1996, “Numerical Simulation of Three-Dimensional Viscous Flow in a Linear Compressor Cascade With Tip Clearance,” ASME Journal of Turbomachinery, Vol. 118, pp. 492-505.
22. Klapproth, J. F., 1959, Discussion in: Lieblein, S., “Loss and Stall Analysis of Compressor Cascades,” ASME Journal of Basic Engineering, Vol. 81, pp. 387-400.
23. Kuroumaru, M., Inoue, M., Higaki, T., Abd-Elkhalek, F. A., and Ikui, T., 1982, “Measurements of Three-Dimensional Flow Field Behind an Impeller by Means of Periodic Multi-sampling of a Slanted Hot Wire,” Bulletin of the JSME, Vol. 25, No. 209, pp. 1674-1681.
24. Lakshminarayana, B., Zaccaria, M., and Marathe, B., 1995, “The Structure of Tip Clearance Flow in Axial Flow Compressors,” ASME Journal of Turbomachinery, Vol. 117, pp. 336-347.
25. Levy, Y., Degani, D., and Seginer, A., 1990, “Graphical Visualization of Vortical Flows by Means of Helicity,” AIAA Journal, Vol. 28, pp. 1347-1352.
26. Moyle, I. N., Walker, G. J., and Shreeve, R. P., 1992, “Stator Averaged Rotor Blade to Blade Near Wall Flow in a Multistage Axial Compressor With Tip Clearance Variation,” ASME Journal of Turbomachinery, Vol. 114, pp. 668-674.
27. Murthy, K. N. S., and Lakshminarayana, B., 1986, “Laser Doppler Velocimeter Measurement in the Tip Region of a Compressor Rotor,” AIAA Journal, Vol. 24, pp. 807-814.
28. Osher, S., and Chakravarthy, S. R., 1983, “Upwind Schemes and Boundary Conditions With Applications to Euler Equations in General Coordinates,” Journal of Computational Physics, Vol. 50, pp. 447-481.
29. Rains, D. A., 1954, “Tip Clearance Flows in Axial Flow Compressors and Pumps,” California Institute of Technology, Hydrodynamics and Mechanical Engineering Laboratories, Report No. 5.
30. Roe, P. L., 1981, “Approximate Riemann Solvers, Parameter Vectors, and Difference Schemes,” Journal of Computational Physics, Vol. 43, pp. 357-372.
31. Rom, J., 1992, High Angle of Attack Aerodynamics: Subsonic, Transonic, and Supersonic Flows, Springer-Verlag, New York.
32. Smith, L. H., Jr., 1970, “Casing Boundary Layers in Multistage Axial-Flow Compressors,” in: Flow Research on Blading, Dzung, L. S., ed., Elsevier, New York, pp. 275-304.
33. Stauter, R. C., 1993, “Measurement of the Three-Dimensional Tip Region Flow Field in an Axial Compressor,” ASME Journal of Turbomachinery, Vol. 115, pp. 468-476.
34. Storer, J. A., and Cumpsty, N. A., 1991, “Tip Leakage Flow in Axial Compressors,” ASME Journal of Turbomachinery, Vol. 113, pp. 252-259.
35. Suder, K. L., and Celestina, M. L., 1996, “Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor Rotor,” ASME Journal of Turbomachinery, Vol. 118, pp. 218-229.
36. Swanson, R. C., and Turkel, E., 1993, “Aspects of a High-Resolution Scheme for the Navier-Stokes Equations,” AIAA Paper No. 93-3372-CP.
37. Van Leer, B., Thomas, J. L., Roe, P. L., and Newsome, R. W., 1987, “A Comparison of Numerical Flux Formulas for the Euler and Navier-Stokes Equations,” AIAA Paper No. 87-1104.
38. Zierke, W. C., Farrell, K. J., and Straka, W. A., 1995, “Measurement of the Tip Clearance Flow for a High-Reynolds-Number Axial Flow Rotor,” ASME Journal of Turbomachinery, Vol. 117, pp. 522-532.