In Situ Characterization of the Shrinkage Behavior of Ceramic Powder Compacts during Sintering by Using Heating Microscopy

Materials Characterization

Volumn 41, Issue 4, 1998, Pages 109-121

  Boccaccini, Aldo R ^a,c   Trusty, Paul A ^b  

^a ILMENAU UNIVERSITY OF TECHNOLOGY   (Germany)

^b UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^c UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; COMPACTION; DENSIFICATION; GLASS; MICROSCOPIC EXAMINATION; POWDERS; SHRINKAGE; SINTERING; YTTRIUM COMPOUNDS;

HEATING MICROSCOPY; OPTICAL DILATOMETRY;

CERAMIC MATERIALS;

EID: 0032182616     PISSN: 10445803     EISSN: None     Source Type: Journal    
DOI: 10.1016/s1044-5803(98)00025-4     Document Type: Article

References (52)

1. R. M. German, G. L. Messing, and R. G. Cornwall, eds.: Sintering Technology, Marcel Dekker Inc., New York (1995).
2. C.-L. Fan and M. N. Rahaman: Factors controlling the sintering of ceramic particulate composites I: conventional processing. J. Am. Ceram. Soc. 75: 2056-2065 (1992).
3. R. K. Bordia and G. W. Scherer: On constrained sintering I-III. Acta Metall. 36:2393-2416 (1988).
4. F. Thummier and W. Thomma: The sintering process. Metall. Rev. 12:69-108 (1967).
5. R. M. German: Sintering Theory and Practice. John Wiley & Sons, New York (1996).
6. A. R. Boccaccini: Use of heating microscopy in sintering studies. Microsc. Anal. 57:19-20 (1997).
7. F. Raether and G. Müller: New in-situ measuring methods for the optimization of sintering processes. In Fourth Euroceramics, vol. 2. C. Galassi, ed., Faenza Editrice, pp. 103-112 (1995).
8. O. S. Ozgen and G. M. Fryer: Experimental technique for acquiring initial-sintering shrinkage data. Trans. Br. Ceram. Soc. 80:67-70 (1981).
9. P. Z. Cai, G. L. Messing and D. L. Green: Determination of mechanical response of sintering compacts by cyclic loading dilatometry. J. Am. Ceram. Soc. 80:445-152 (1997).
10. A. Jagota, K. R. Kikeska, and R. K. Bordia: Isotropic constitutive model for sintering particle packing. J. Am. Ceram. Soc. 73:2266-2273 (1990).
11. L. C. De Jonghe and M. N. Rahaman: A loading dilatometer. Rev. Sci. Instrum. 55:2007-2010 (1984).
12. G. W. Scherer: Viscous sintering under a uniaxial load. J. Am. Ceram. Soc. 69:C206-C207 (1986).
13. T. Takamori and K. Iriyama: Thermal shrinkage of microporous glasses. Ceram. Bull. 46:1169-1173 (1967).
14. A. R. Boccaccini: Shrinkage anisotropy of glass powder compacts sintered in dilatometers. J. Mater. Res. 13:1693-1697 (1998).
15. A. R. Boccaccini and E. A. Olevsky: Anisotropic shrinkage during sintering of glass powder compacts under uniaxial stresses: qualitative, assessment of experimental evidence. Metall. Mater. Trans. A 28:2397-2404 (1997).
16. M. N. Rahaman, L. C. De Jonghe, S. L. Shinde, and P. H. Tewari: Sintering and microstructure of mullite aerogels. J. Am. Ceram. Soc. 71:C338-C341 (1988).
17. R. E. Dutton, and M. N. Rahaman: Sintering, creep, and electrical conductivity of model glass-matrix composites. J. Am. Ceram. Soc. 75:2146-2154 (1992).
18. M. Borbe, A. Bürger, E. Hornbogen, and H. Nöcker: 3D-Dilatometer miβt thermische Längenänderungen anistroper Werkstoffe. Materialprüfung 36:418-421 (1994).
19. S. Mäkipirrt: On the sintering of W-Ni-Cu heavy metal. In Powder Metallurgy. W. Leszynski, ed., Interscience Publishers, New York, London, pp. 97-111 (1960).
20. A. R. Boccaccini: Anisotropic densification during sintering of glass powder compacts. J. Mater. Sci. Lett. 12:943-945 (1993).
21. A. R. Boccaccini and R. Kramer: Experimental verification of a stereology-based equation for the shrinkage of glass powder compacts during sintering. Glass Technol. 36:95-97 (1995).
22. 3 platelet inclusions. J. Mater. Sci. 29:4273-1278 (1994).
23. A. R. Boccaccini, P. A. Trusty, and D. M. R. Taplin: Anisotropic shrinkage of barium magnesium aluminosilicate glass powder compacts during sintering. Mater. Lett. 24:199-205 (1995).
24. E. A. Giess, C. F. Guerci, G. F. Walker, and S. H. Wen: Isothermal sintering of spheroized cordierite-type glass powders. J. Am. Ceram. Soc. 68:C328-C329 (1985).
25. A. R. Boccaccini, W. Stumpfe, D. M. R. Taplin, and C. B. Ponton: Densification and crystallization of glass powder of compacts during constant heating rate sintering. Mater. Sci. Eng. A219:26-31 (1996).
26. M. Paganelli: In situ observation of ceramic tiles body batches sintering in fast firing cycles. Ind. Ceram. 16:1-6 (1996).
27. U. Partsch, C. Kretzschmar, E. K. Polzer, P. Otschik, and J.-H. Meyer: Shrinkage Analysis of LTCC Multilayers (in German). Proc. Werkstoffwoche-96, Symposium 1: Werkstoffe für die Informationstechnik, H. Thomann, ed., DGM Informationsgesellschaft Verlag, Frankfurt, Germany, pp.139-144 (1997).
28. Y. Mizuno, A. Kawasaki, and R. Watanabe: In-situ measurement of sintering shrinkage in powder compacts by digital image correlation method. Powder Metall. 38:191-195 (1995).
29. Y. Mizuno, A. Kawasaki, and R. Watanabe: Measurement of nonuniform sintering shrinkage of functionally gradient material by digital image processing. Metall. Mater. Trans. 26B:75-79 (1995).
30. A. R. Boccaccini and C. B. Ponton: Processing of 2-D woven fibre reinforced ceramic matrix composites using electrophoretic deposition. J. Metall. 47: (10):34-37 (1995).
31. 3. J. Am. Ceram. Soc. 78:1383-1386 (1995).
32. G. West, A. R. Boccaccini, and D. M. R. Taplin: Creep and creep-fatigue behaviour of continuous fibre reinforced glass-ceramic matrix composites. Materialwissenschaft Werkstofftechnik 26:368-373 (1995).
33. A. R. Boccaccini, P. A. Trusty, D. M. R. Taplin, and C. B. Ponton: Colloidal Processing of a mullite matrix material suitable for infiltrating woven fibre preforms using electrophoretic deposition. J. Eur. Ceram. Soc. 16:1319-1327 (1996).
34. E. M. Levin, C. R. Robbins, and H. F. McMurdie: Phase Diagrams for Ceramists: 1969 Supplement. The American Ceramic Society, Inc., Columbus, OH, Fig. 2388 (1969).
35. 7 via Hydrothermal Processing. In Proceedings of Int. Symp. on SoIvothermal and Hydrothermal Processes, Takamatsu, Japan (1997).
36. K. Lambrinou, O. Van Der Biest, A. R. Boccaccini, and D. M. R. Taplin: Densification and crystallization behavior of barium-magnesium aluminosilicate glass powder compacts. J. Eur. Ceram. Soc. 16:1237-1244 (1996).
37. LEITZ Heating Microscopes. Product Information No. 913070, Leica, Wetzlar, Germany.
38. J. Ito and H. Johnson: Synthesis and study of yttrialite. Am. Mineralog. 53:1940-1952 (1968).
39. G. W. Scherer: Viscous sintering of particle-filled composites. Ceram. Bull. 70:1059-1063 (1991).
40. P. A. Trusty and C. B. Ponton: Progress Report VII to DRA. IRC in Materials, The University of Birmingham, pp. 1-15 (1996).
41. P. A. Trusty, K. C. Chan, and C. B. Ponton: Synthesis of sinteractive single-phase microstructure yttrium disilicate precursor powder using hydrothermal processing. J. Mater. Res. (submitted).
42. H. H. Hausner: The linear shrinkage behaviour of metal powder compacts during sinterining. In Progress in Powder Metallurgy: Proc. 19th Annual Powder Metallurgy Technical Conf. American Powder Metallurgy Institute, pp. 67-85 (1963).
43. D. Stefanovic, S. Pejovic, V. Petrovic, and M. M. Ristic: Shrinkage anisotropy taking place during sintering regarded from standpoint of electronic theory. In Sintering Processes: Materials Science Research, vol. 13. G. C. Kuczynski, ed., Plenum Press, New York, London, pp. 167-174 (1980).
44. E. A. Olevsky and V. Skorohod: Deformation aspects of anisotropic-porous bodies sintering. J. Phy. 4(7):739-742 (1993).
45. M. Mitov, H. E. Exner, and G. Petzow: Orientation pore structure in loose and pressed carbonyl iron and its influence on shrinkage anisotropy. In Sintering: New Developments, Materials Science Monographs 4. M. M. Ristic, ed., Elsevier, Amsterdam, pp. 90-98 (1979).
46. H. E. Exner and E. A. Giess: Anisotropic shrinkage of cordierite-type glass powder cylindrical compacts. J. Mater. Res. 3:122-125 (1988).
47. H. E. Exner and G. Petzow: Shrinkage and rearrangement during sintering of glass spheres. In Sintering Processes, Materials Science Research Vol. 13. G. C. Kuczynski, ed., Plenum Press, New York, London, pp. 279-293 (1980).
48. M. N. Rahaman, L. C. De Jongue, G. W. Scherer, and R. J. Brook: Creep and densification during sintering of glass powder compacts. J. Am. Ceram. Soc. 70:766-774 (1987).
49. M. N. Rahaman and L. C. De Jongue: Sintering of sphencal glass powder under a uniaxial stress. J. Am. Ceram. Soc. 73:707-712 (1990).
50. B. Sonuparlak: Sol-gel processing of infrared transparent mullite. Adv. Ceram. Mater. 3:263-267 (1988).
51. F. Delie, D. Bouvard, and J. E. Mazille: Investigation of the consolidation of powder composite by image analysis. Mater. Sci. Eng. A184:65-71 (1994).
52. C. Jacquet, C. Gauthier, and G. Thomas: Geometric characterisation of porous textures in sintered glass bead packing through image analysis, mercury porosimetry and gravimetry. Powder Technol. 80:73-81 (1994).