메뉴 건너뛰기




Volumn 34, Issue 9, 1998, Pages 1047-1060

Optimal service control of a serial production line with unreliable workstations and random demand

Author keywords

Discrete event dynamic system; Dynamic programming; Manufacturing systems; Optimal control

Indexed keywords

BANG BANG CONTROL SYSTEMS; COMPUTER WORKSTATIONS; DISCRETE TIME CONTROL SYSTEMS; DISTRIBUTED COMPUTER SYSTEMS; DYNAMIC PROGRAMMING; RANDOM PROCESSES;

EID: 0032166494     PISSN: 00051098     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0005-1098(98)00050-8     Document Type: Article
Times cited : (17)

References (38)
  • 1
    • 0022667867 scopus 로고
    • Optimal control of production rate in failure prone manufacturing system
    • Akella, R. and P. R. Kumar (1986). Optimal control of production rate in failure prone manufacturing system. IEEE Trans. Automat. Control, AC-31 (2), 116-126.
    • (1986) IEEE Trans. Automat. Control , vol.AC-31 , Issue.2 , pp. 116-126
    • Akella, R.1    Kumar, P.R.2
  • 2
    • 0024716282 scopus 로고
    • Flow balance equations for the steady-state distribution of a flexible manufacturing system
    • Algoet, P. H. (1989). Flow balance equations for the steady-state distribution of a flexible manufacturing system. IEEE Trans. Automat. Control, AC-34(8), 917-921.
    • (1989) IEEE Trans. Automat. Control , vol.AC-34 , Issue.8 , pp. 917-921
    • Algoet, P.H.1
  • 5
    • 0024037430 scopus 로고
    • Optimality of zero-inventory policies for unreliable manufacturing systems
    • Bielecki, T. and P. R. Kumar (1988). Optimality of zero-inventory policies for unreliable manufacturing systems. Oper. Res. 36(4), 532-541.
    • (1988) Oper. Res. , vol.36 , Issue.4 , pp. 532-541
    • Bielecki, T.1    Kumar, P.R.2
  • 6
    • 0025481509 scopus 로고
    • Manufacturing flow control and preventive maintenance: A stochastic control approach
    • Boukas, E. and A. Haurie (1990). Manufacturing flow control and preventive maintenance: a stochastic control approach. IEEE Trans. Automat. Control, AC-35(9), 1024-1031.
    • (1990) IEEE Trans. Automat. Control , vol.AC-35 , Issue.9 , pp. 1024-1031
    • Boukas, E.1    Haurie, A.2
  • 7
    • 0025862567 scopus 로고
    • A turnpike improvement algorithm for piecewise deterministic control
    • Boukas, E., A. Haurie and C. van Delft (1991). A turnpike improvement algorithm for piecewise deterministic control. Optim. Control. Appl. Meth., 12, 1-18.
    • (1991) Optim. Control. Appl. Meth. , vol.12 , pp. 1-18
    • Boukas, E.1    Haurie, A.2    Van Delft, C.3
  • 8
    • 0030171583 scopus 로고    scopus 로고
    • Optimal control of manufacturing flow and preventive maintenance
    • Boukas, E. and H. Yang (1996). Optimal control of manufacturing flow and preventive maintenance. IEEE Trans. Automat. Control, AC-41 (6), 881-885.
    • (1996) IEEE Trans. Automat. Control , vol.AC-41 , Issue.6 , pp. 881-885
    • Boukas, E.1    Yang, H.2
  • 9
    • 0029327727 scopus 로고
    • Robust production and maintenance planning in stochastic manufacturing systems
    • Boukas, E., Q. Zhang and G. Yin (1995). Robust production and maintenance planning in stochastic manufacturing systems. IEEE Trans. Automat. Control, AC-40(6), 1098-1102.
    • (1995) IEEE Trans. Automat. Control , vol.AC-40 , Issue.6 , pp. 1098-1102
    • Boukas, E.1    Zhang, Q.2    Yin, G.3
  • 10
    • 85084180829 scopus 로고
    • Perturbation analysis for the design of flexible manufacturing system flow controllers
    • Caramanis, M. and G. Liberopolous (1992). Perturbation analysis for the design of flexible manufacturing system flow controllers. Oper. Res., 40(6), 1107-1125.
    • (1992) Oper. Res. , vol.40 , Issue.6 , pp. 1107-1125
    • Caramanis, M.1    Liberopolous, G.2
  • 11
    • 0024480465 scopus 로고
    • Hierarchical flow control: A framework for scheduling and planning discrete events in manufacturing systems
    • Gershwin, S. B. (1989). Hierarchical flow control: a framework for scheduling and planning discrete events in manufacturing systems. Proc. IEEE, 77(1), 195-209.
    • (1989) Proc. IEEE , vol.77 , Issue.1 , pp. 195-209
    • Gershwin, S.B.1
  • 14
    • 0021439649 scopus 로고
    • Optimal control of two interacting service stations
    • Hajek, B. (1984). Optimal control of two interacting service stations. IEEE Trans. Automat. Control, AC-29, 491-498.
    • (1984) IEEE Trans. Automat. Control , vol.AC-29 , pp. 491-498
    • Hajek, B.1
  • 15
    • 0005586137 scopus 로고
    • Turnpike properties for a class of piecewise deterministic control systems
    • Haurie, A. and C. Van Delft (1991). Turnpike properties for a class of piecewise deterministic control systems, Ann. Oper. Res., 29, 351-374.
    • (1991) Ann. Oper. Res. , vol.29 , pp. 351-374
    • Haurie, A.1    Van Delft, C.2
  • 16
    • 0028392409 scopus 로고
    • Boundedly optimal control of piecewise deterministic processes
    • Haurie, A., A. Leizarowitz, and C. Van Delft (1994). Boundedly optimal control of piecewise deterministic processes. Eur. J. Oper. Res., 73, 237-251.
    • (1994) Eur. J. Oper. Res. , vol.73 , pp. 237-251
    • Haurie, A.1    Leizarowitz, A.2    Van Delft, C.3
  • 17
    • 0028495053 scopus 로고
    • Optimality of hedging point policies in the production control of failure prone manufacturing systems
    • Hu, J. Q., P. Vakili, and G. Yu (1994). Optimality of hedging point policies in the production control of failure prone manufacturing systems. IEEE Trans. Automat. Control, AC-39(9), 1875-1880.
    • (1994) IEEE Trans. Automat. Control , vol.AC-39 , Issue.9 , pp. 1875-1880
    • Hu, J.Q.1    Vakili, P.2    Yu, G.3
  • 18
    • 0027558877 scopus 로고
    • A queuing equivalence to optimal control of manufacturing systems with failures
    • Hu, J. Q. and D. Xiang (1993). A queuing equivalence to optimal control of manufacturing systems with failures. IEEE Trans. Automat. Control, AC-38, 499-502.
    • (1993) IEEE Trans. Automat. Control , vol.AC-38 , pp. 499-502
    • Hu, J.Q.1    Xiang, D.2
  • 19
    • 0028399818 scopus 로고
    • Structural properties of optimal production controllers in failure-prone manufacturing systems
    • Hu, J. Q. and D. Xiang (1994). Structural properties of optimal production controllers in failure-prone manufacturing systems. IEEE Trans. Automat. Control, AC-39(3), 640-643.
    • (1994) IEEE Trans. Automat. Control , vol.AC-39 , Issue.3 , pp. 640-643
    • Hu, J.Q.1    Xiang, D.2
  • 20
    • 0029292637 scopus 로고
    • Optimal control for systems with deterministic production cycles
    • Hu, J. Q. and D. Xiang (1995). Optimal control for systems with deterministic production cycles. IEEE Trans. Automat. Control, AC-40(2), 782-786.
    • (1995) IEEE Trans. Automat. Control , vol.AC-40 , Issue.2 , pp. 782-786
    • Hu, J.Q.1    Xiang, D.2
  • 21
    • 0020915621 scopus 로고
    • An algorithm for the computer control of production in flexible manufacturing system
    • Kimemia, J. G. and S. B. Gershwin (1983). An algorithm for the computer control of production in flexible manufacturing system. IIE Trans. 15(4), 353-362.
    • (1983) IIE Trans. , vol.15 , Issue.4 , pp. 353-362
    • Kimemia, J.G.1    Gershwin, S.B.2
  • 22
    • 0029324676 scopus 로고
    • Dynamics and design of a class of parameterized manufacturing flow controllers
    • Liberopolous, G. and M. Caramanis (1995). Dynamics and design of a class of parameterized manufacturing flow controllers. IEEE Trans. Automat. Control, AC-40(6), 1018-1028.
    • (1995) IEEE Trans. Automat. Control , vol.AC-40 , Issue.6 , pp. 1018-1028
    • Liberopolous, G.1    Caramanis, M.2
  • 23
    • 0001744740 scopus 로고
    • Optimal control rules for scheduling job shops
    • Lou, S. X. C. and G. V. Ryzin (1989). Optimal control rules for scheduling job shops. Ann. Oper. Res. 17, 233-248.
    • (1989) Ann. Oper. Res. , vol.17 , pp. 233-248
    • Lou, S.X.C.1    Ryzin, G.V.2
  • 24
    • 0028392099 scopus 로고
    • Optimal feedback production planning in a stochastic two-machine flowshop
    • Lou, S. X. C., S. Sethi and Q. Zhang (1994). Optimal feedback production planning in a stochastic two-machine flowshop. Eur. J. Oper. Res., 73, 331-345.
    • (1994) Eur. J. Oper. Res. , vol.73 , pp. 331-345
    • Lou, S.X.C.1    Sethi, S.2    Zhang, Q.3
  • 25
    • 0027681975 scopus 로고
    • Optimal service control of a station connected with two parallel substations
    • Miyoshi, N., Ohnisi and N. Okino (1993). Optimal service control of a station connected with two parallel substations. IEEE Trans. Automat. Control, 38, 1567-1572.
    • (1993) IEEE Trans. Automat. Control , vol.38 , pp. 1567-1572
    • Miyoshi, N.1    Ohnisi2    Okino, N.3
  • 26
    • 0029378614 scopus 로고
    • Optimal feedback production planning in a stochastic N-machine flowshop
    • Presman, E., S. Sethi and Q. Zhang (1995). Optimal feedback production planning in a stochastic N-machine flowshop. Automatica, 31(9), 1325-1332.
    • (1995) Automatica , vol.31 , Issue.9 , pp. 1325-1332
    • Presman, E.1    Sethi, S.2    Zhang, Q.3
  • 27
    • 0027666614 scopus 로고
    • Production control for a tandem two-machine system
    • Ryzin, V., S. X. C. Lou and S. B. Gershwin (1993). Production control for a tandem two-machine system. IIE Trans. 25, 5-20.
    • (1993) IIE Trans. , vol.25 , pp. 5-20
    • Ryzin, V.1    Lou, S.X.C.2    Gershwin, S.B.3
  • 28
    • 0000147314 scopus 로고
    • Turn-pike sets and their analysis in stochastic production planning problems
    • Sethi, S. P., H. M. Soner, Q. Zhang and J. Jiang (1992a). Turn-pike sets and their analysis in stochastic production planning problems. Math. Oper. Res., 17, 932-950.
    • (1992) Math. Oper. Res. , vol.17 , pp. 932-950
    • Sethi, S.P.1    Soner, H.M.2    Zhang, Q.3    Jiang, J.4
  • 30
    • 0010354136 scopus 로고
    • Hierarchical controls in a stochastic two-machine flowshop with a finite internal buffer
    • Tuscson, AZ, U.S.A.
    • Sethi, S., Q. Zhang and X. Y. Zhou (1992b). Hierarchical controls in a stochastic two-machine flowshop with a finite internal buffer. In Proc. 31st IEEE CDC, Tuscson, AZ, U.S.A., pp. 2074-2079.
    • (1992) Proc. 31st IEEE CDC , pp. 2074-2079
    • Sethi, S.1    Zhang, Q.2    Zhou, X.Y.3
  • 31
    • 0024048635 scopus 로고
    • Production control of a manufacturing system with multiple machine states
    • Sharifnia A. (1988). Production control of a manufacturing system with multiple machine states IEEE Trans. Automat. Control, AC-33(7), 620-625.
    • (1988) IEEE Trans. Automat. Control , vol.AC-33 , Issue.7 , pp. 620-625
    • Sharifnia, A.1
  • 32
    • 0042955789 scopus 로고
    • Parameter optimization of a control policy for unreliable manufacturing systems
    • Tuscson, AZ, U.S.A.
    • Song, D. P., F. S. Tu and S. X. C. Lou (1992). Parameter optimization of a control policy for unreliable manufacturing systems. In Proc. 31st IEEE CDC, Tuscson, AZ, U.S.A., pp. 1655-1656.
    • (1992) Proc. 31st IEEE CDC , pp. 1655-1656
    • Song, D.P.1    Tu, F.S.2    Lou, S.X.C.3
  • 33
    • 0030421718 scopus 로고    scopus 로고
    • Optimal control structure of an unreliable manufacturing system and random demands
    • Kobe, Japan
    • Song, D. P. and Y. X. Sun (1996). Optimal control structure of an unreliable manufacturing system and random demands. In Proc. 35th IEEE CDC, Kobe, Japan, pp. 4553-4557.
    • (1996) Proc. 35th IEEE CDC , pp. 4553-4557
    • Song, D.P.1    Sun, Y.X.2
  • 34
    • 0032359584 scopus 로고    scopus 로고
    • Optimal control of a stochastic assembly production line
    • Song, D. P., Y. X. Sun and W. Xing (1998). Optimal control of a stochastic assembly production line J. Optim. Theory Appl., 98(3).
    • (1998) J. Optim. Theory Appl. , vol.98 , Issue.3
    • Song, D.P.1    Sun, Y.X.2    Xing, W.3
  • 35
    • 0041452705 scopus 로고
    • Preventive hedging point control and its realization
    • Sydney, Autralia
    • Tu, F. S., D. P. Song and S. X. C. Lou (1993). Preventive hedging point control and its realization. In the 12th IFAC World Congress, Vol. 5, Sydney, Autralia, pp. 13-16.
    • (1993) The 12th IFAC World Congress , vol.5 , pp. 13-16
    • Tu, F.S.1    Song, D.P.2    Lou, S.X.C.3
  • 36
    • 0000048705 scopus 로고
    • Optimal control of service rates in networks in queues
    • Weber, R. R. and S. Stidham (1987). Optimal control of service rates in networks in queues. Adv. Appl. Probab., 19, 202-218.
    • (1987) Adv. Appl. Probab. , vol.19 , pp. 202-218
    • Weber, R.R.1    Stidham, S.2
  • 37
    • 0027306941 scopus 로고
    • On the asymptote of the optimal routing policy for two service stations
    • Xu, S. H. and H. Chen (1993). On the asymptote of the optimal routing policy for two service stations. IEEE Trans. Automat. Control, 38, 187-189.
    • (1993) IEEE Trans. Automat. Control , vol.38 , pp. 187-189
    • Xu, S.H.1    Chen, H.2
  • 38
    • 0028710489 scopus 로고
    • Using stochastic optimization to determine threshold values for the control of unreliable manufacturing systems
    • Yan, H., G. Yin and S. X. C. Lou (1994). Using stochastic optimization to determine threshold values for the control of unreliable manufacturing systems. J. Optim. Theory Appl., 83(3), 511-539.
    • (1994) J. Optim. Theory Appl. , vol.83 , Issue.3 , pp. 511-539
    • Yan, H.1    Yin, G.2    Lou, S.X.C.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.