Stress-Strain Relationship of Common Wire Nails under Reversed Cyclic Loading

Journal of Testing and Evaluation

Volumn 26, Issue 5, 1998, Pages 420-425

  Chui, Y H ^a   Ni, C ^b  

^a UNIVERSITY OF NEW BRUNSWICK   (Canada)

^b FORINTEK CANADA CORP   (Canada)

Author keywords

Bauschinger effect; Constitutive material model; Nail; Reversed cyclic load test; Timber joint

Indexed keywords

COMPUTER SIMULATION; CYCLIC LOADS; DYNAMIC RESPONSE; ELASTIC MODULI; FINITE ELEMENT METHOD; JOINTS (STRUCTURAL COMPONENTS); NAILS; STRAIN; STRESS ANALYSIS; STRUCTURAL FRAMES; YIELD STRESS;

BAUSCHINGER EFFECTS; CONSTITUTIVE MATERIAL MODEL; REVERSED CYCLIC LOAD TESTS; TIMBER JOINTS;

STRUCTURAL ANALYSIS;

EID: 0032165198     PISSN: 00903973     EISSN: None     Source Type: Journal    
DOI: 10.1520/jte12023j     Document Type: Article

References (25)

1. American Plywood Association, "Hurricane Andrew - Report of Damage," technical report, APA, Tacoma, WA, 1992.
2. Foliente, G. C., "Timber Structures in Seismic Regions - General Overview and Research Needs," in Earthquake Performance and Safety of Timber Structures, G. C. Foliente, Ed., Forest Products Society, Madison, WI, 1997.
3. Paulay, T. and Priestley, M. J. N., Seismic Design of Reinforced Concrete and Masonry Buildings, Wiley and Sons, New York, 1992.
4. Chui, Y. H. and Ni, C., "Dynamic Response of Timber Frames with Semi-Rigid Moment Connections," Proceedings of Seventh Canadian Conference on Earthquake Engineering, Canadian Association for Earthquake Engineering, 1995, pp. 609-616.
5. Dolan, J. D., "The Dynamic Response of Timber Shear Walls," Ph.D. thesis, Department of Civil Engineering, University of British Columbia, Vancouver, BC, 1989.
6. Karacabeyli, E. and Ceccotti, A., "Quasi-Static Reversed-Cyclic Testing of Nailed Joints," Proceedings of International Council for Building Research Studies and Documentation Working Commission W18, University of Karlsruhe, Germany, 1996.
7. Prion, H. and Foschi, R. O., "Cyclic Behaviour of Dowel Type Connections," Proceedings of 1994 Pacific Timber Engineering Conference, Timber Research and Development Council, Fortitude Valley MAC, Queensland, Australia, Vol. 2, 1994, pp. 19-25.
8. Soltis, L. A. and Mtenga, P. V. A., "Strength of Nailed Wood Joints Subjected to Dynamic Load," Forest Products Journal, Vol. 35, No. 11/12, 1985, pp. 14-18.
9. Ni, C. and Chui, Y. H., "Response of Nailed Wood Joints to Dynamic Loads," Proceedings of 1994 Pacific Timber Engineering Conference, Timber Research and Development Council, Fortitude Valley MAC, Queensland, Australia, Vol. 2, 1994, pp. 9-18.
10. Wilkinson, T. L., "Vibrational Loading of Mechanically Fastened Wood Joints," Research Paper FPL 274, USDA Forest Service, Forest Products Laboratory, Madison, WI, 1976.
11. Gutshall, S. T., Dolan, J. D., and McLain, T. E., "Monotonic and Cyclic Short-Term Performance of Nailed and Bolted Timber Connections," Report TE-1994-005, Department of Wood Science and Forest Products, Virginia Polytechnic Institute and State University, Blacksburg, VA, 1994.
12. Daneff, G., Smith, I., and Chui, Y. H., "Test Protocol for Evaluating Seismic Behaviour of Connections," Proceedings of International Wood Engineering Conference, Lousiana Slate University, Baton Rouge, LA, Vol. 1, 1996, pp. 37-44.
13. Cruz, H. M. P., "Nailed Timber Joints Subjected to Alternating Load Cycles," Ph.D. thesis, Department of Civil Engineering, University of Brighton, Brighton, UK, 1993.
14. Ni, C. and Chui, Y. H., "Predicting the Response of Timber Joints Under Reversed Cyclic Load," Proceedings of International Timber Engineering Conference, Louisiana State University, Baton Rouge, LA, Vol. 3, 1996, pp. 98-105.
15. Boyer, H. E. and Gall, T. L. Metals Handbook, American Society for Metals, Metals Park, OH, 1985.
16. Ehlbeck, J., "Nailed Joints in Wood Structures," Bulletin No. 166, Wood Research and Construction Lab, Virginia Polytechnic Institute and State University, Blacksburg, VA, 1979.
17. Loferski, J. R. and McLain, T. E., "Static and Impact Flexural Properties of Common Wire Nails," Journal of Testing and Evaluation, Vol. 19, No. 4, 1991, pp. 297-304.
18. Noren, B., "Method of Testing Nails in Wood," Proceedings of International Council for Building Research Studies and Documentation Working Commission W18, University of Karlsruhe. Germany, Paper 14-7-2, 1981.
19. Smith, I. and Whale, L. R. J., "Mechanical Properties of Nails and Their Influence on Mechanical Properties of Nailed Timber Joints Subjected to Lateral Load: Part 1 - Background and Tests of Nails of UK Origin," TRADA Research Report 4/85, Timber Research and Development Association, Hughenden Valley, UK, 1985.
20. ASTM, Standard Test Methods for Nails, ASTM F680-80, American Society for Testing and Materials, West Conshohocken, PA, 1990.
21. Sandor, B. I., Fundamentals of Cyclic Stress and Strain, The University of Wisconsin Press, Madison, WI, 1972.
22. Bauschinger, J., "Variations in the Elastic Limit of Iron and Steel," Journal of Iron and Steel Institute, Vol. 1, 1887, pp. 442-444.
23. Carlo, A. C., "Numerical Simulation of Steel Shapes Under Cyclic Bending: Effect of the Constitutive Law of the Material," Costruzioni Metalliche, Vol. 3, 1987, pp. 154-175.
24. Filippou, F. C., Bertero, V. V., and Popov, E. P., "Effects of Bound Deterioration on Hysteretic Behavior of Reinforced Concrete Joints," EERC Report No. 83-19, University of California, Berkeley, CA, 1983.
25. Himmelblau, D. M., Applied Nonlinear Programming, McGraw-Hill Book Company, New York, 1972.