SCOPUS 정보 검색 플랫폼

Volumn 38, Issue 9, 1998, Pages 1017-1030

Thermal characteristics of the spindle bearing system with a gear located on the bearing span

Author keywords

Angular contact ball bearing; Machine tools; Spindle system; Thermal characteristics

Indexed keywords

BALL BEARINGS; FINITE ELEMENT METHOD;

SPINDLE BEARING SYSTEMS; THERMAL CHARACTERISTICS;

MACHINE TOOLS;

EID: 0032164613 PISSN: 08906955 EISSN: None Source Type: Journal
DOI: 10.1016/s0890-6955(97)00075-8 Document Type: Article

Times cited : (94)

References (11)

1
- 0027313798
- Spindle-bearing systems for high-speed applications in machine tools
- M. Weck, A. Koch, Spindle-bearing systems for high-speed applications in machine tools, Ann. CIRP 42 (1993) 445.
- (1993) Ann. CIRP , vol.42 , pp. 445
- Weck, M.¹ Koch, A.²

2
- 0025594384
- On the effect of variations in the design parameters on the dynamic performance of machine tool spindle bearing systems
- K.J.H. Al-Shareef, J.A. Brandon, On the effect of variations in the design parameters on the dynamic performance of machine tool spindle bearing systems, Int. J. Mach Tools Manufact. 30 (1990) 431.
- (1990) Int. J. Mach Tools Manufact. , vol.30 , pp. 431
- Al-Shareef, K.J.H.¹ Brandon, J.A.²

3
- 0026745384
- Steady-state model of a floating ring bearing including thermal effects
- D.M. Clarke, C. Fall, G.N. Hayden, T.S. Wilkinson, Steady-state model of a floating ring bearing including thermal effects, J. Tribology Trans. ASME 114 (1992) 141.
- (1992) J. Tribology Trans. ASME , vol.114 , pp. 141
- Clarke, D.M.¹ Fall, C.² Hayden, G.N.³ Wilkinson, T.S.⁴

4
- 0026188746
- Accurate estimates needed for bearing heat, lube conditions
- Bergling, Gunnar, Accurate estimates needed for bearing heat, lube conditions, J. Pulp & Paper 65 (1991) 56.
- (1991) J. Pulp & Paper 65 , pp. 56
- Bergling, G.¹

5
- 0027226906
- Influence of high rotational speeds on heat transfer and oil film thickness in aero engine bearing chamber
- S. Witig, A. Glahn, J. Himmerlsbach, Influence of high rotational speeds on heat transfer and oil film thickness in aero engine bearing chamber, Internal Gas Turbine and Aeroengine Congress and Exposition of ASME 8 (1993).
- (1993) Internal Gas Turbine and Aeroengine Congress and Exposition of ASME , vol.8
- Witig, S.¹ Glahn, A.² Himmerlsbach, J.³

6
- 0026997784
- Steady-state temperature and stack-up force distributions in a railroad roller bearing assembly
- L. Dunnuck, D.T.F. Conry, C. Cusano, Steady-state temperature and stack-up force distributions in a railroad roller bearing assembly, RTD Trans. ASME 5 (1992) 89.
- (1992) RTD Trans. ASME , vol.5 , pp. 89
- Dunnuck, L.¹ Conry, D.T.F.² Cusano, C.³

7
- 0026259905
- Thermal behavior of bearing surrounding in machine tool spindle system
- L. Sunkyu, S. Hidenori, I. Yoshimi, Thermal behavior of bearing surrounding in machine tool spindle system, JSME 57 (1991) 3612.
- (1991) JSME , vol.57 , pp. 3612
- Sunkyu, L.¹ Hidenori, S.² Yoshimi, I.³

8
- 0346438989
- and Chap. 15, Wiley, New York
- A. Harris, Rolling Bearing Analysis, 3rd ed, p. 330 and Chap. 15, Wiley, New York, 1991.
- (1991) Rolling Bearing Analysis, 3rd Ed , pp. 330
- Harris, A.¹

9
- 0020251478
- The state of the art in the measurement of the stiffness and damping of rolling element bearings
- B.J. Stone, The state of the art in the measurement of the stiffness and damping of rolling element bearings, Ann. CIRP 32 (1982) 529.
- (1982) Ann. CIRP , vol.32 , pp. 529
- Stone, B.J.¹

10
- 0001376045
- Convection heat transfer and flow phenomena of rotating spheres
- F. Kreith, Convection heat transfer and flow phenomena of rotating spheres, Int. J. Heat Mass Transfer 6 (1963) 881.
- (1963) Int. J. Heat Mass Transfer , vol.6 , pp. 881
- Kreith, F.¹

11
- 0004153986
- Chap. 6. Addison-Wesley, MA
- F.M. White, Heat Transfer, Chap. 6. Addison-Wesley, MA, 1984.
- (1984) Heat Transfer
- White, F.M.¹

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.