A three-dimensional boundary element approach to confined free-surface flow as applied to die casting

Engineering Analysis with Boundary Elements

Volumn 22, Issue 2, 1998, Pages 83-102

  Khayat, Roger E ^a  

^a UNIVERSITY OF WESTERN ONTARIO   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL FLUID DYNAMICS; COMPUTER SIMULATION; DIE CASTINGS; FLOW OF FLUIDS; FLUID STRUCTURE INTERACTION; POTENTIAL FLOW; THREE DIMENSIONAL;

CONFINED FREE SURFACE FLOW;

BOUNDARY ELEMENT METHOD;

EID: 0032163089     PISSN: 09557997     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0955-7997(98)00038-1     Document Type: Article

References (91)

1. Tosaka N, Siguno R. Boundary element analysis of nonlinear free surface flow in containers. In: Kane JH, Maier G, Tosaka N, Atluri SN, editors. Advances in boundary element techniques. Berlin: Springer-Verlag, 1992.
2. Yeung RW Numerical methods in free surface flows. Ann. Rev. Fluid Mech. 1982;14:395.
3. Floryan JM, Rasmussen H Numerical methods for viscous flows with moving boundaries. App. Mech. Rev. 1989;42:323.
4. Pozrikidis C. Boundary integral and singularity methods for linearized viscous flow. Cambridge: Cambridge University Press, 1992.
5. Longuet-Higgins MS, Cokelet ED The deformation of steep surface waves on water. I. A numerical method of computation. Proc. R. Soc. Lond. 1976;A 350:1.
6. Tszeng TC, Chu YL A study of wave formation in shot sleeve of a die casting machine. J. Eng. Industry 1994;116:175.
7. Garber LW. Theoretical analysis and experimental observation of air entrapment during cold chamber filling. Die Casting Engineer, May-June 1982: 14-22.
8. Karni Y. Selection of process variables for die casting. PhD thesis, the Ohio State University, Columbus, OH, 1991.
9. Duran M, Karni Y, Brevick J, Chu YL, Altan T. Minimization of air entrapment in the shot sleeve of a die casting machine to reduce porosity. Report No. ERC/NSM-C-91-31, the Ohio State University, 1991.
10. Grilli ST. Modeling of nonlinear wave motion in shallow water. In: Kane JH, Maier G, Tosaka N, Atluri SN, editors. Advances in boundary element techniques. Berlin: Springer-Verlag, 1992.
11. Georges PL, Hecht F, Salted E Automatic mesh generator with specified boundary. Comp. Meth. App. Mech. Eng. 1991;92:269.
12. Hauser J, Wheatherill NP, Eiseman PR, Thompson JF. Numerical grid generation in computational fluid dynamics and related topics. Pineridge Press, 1994.
13. Stone HA, Leal LG Relaxation and breakup of an initially extended drop in an otherwise quiescent fluid. J. Fluid Mech. 1989;198:399.
14. Khayat RE, Derdouri A, Hebert LP A three-dimensional boundary-element approach to gas-assisted injection molding. J. Non-Newt. Fluid Mech. 1995;57:253.
15. Cruise TA Numerical solutions in three dimensional elastostatics. Int. J. Solids Structures 1969;5:1259.
16. Telles JC A self-adaptive coordinate transformation for efficient numerical evaluation of general boundary element integrals. Int. J. Num. Meth. Eng. 1989;24:959.
17. Conte SD, de Boor C. Elementary numerical analysis: an algorithmic approach. New York: McGraw-Hill, 1972.
18. Frey R System for statistical process monitoring during pressure die casting. Casting Plant and Technology 1993;3:24.
19. Partridge PW, Brebbia CA, Wrobel LC. The dual reciprocity boundary element method. Southampton: Computational Mechanics Publications, 1992.
20. Frayce D, Khayat RE, Derdouri A A dual reciprocity approach to three-dimensional transient heat conduction as applied to materials processing. Num. Heat Transfer 1996;A 29:243.
21. Faltinsen OM A numerical nonlinear method of sloshing in tanks with two-dimensional flow. J. Ship Res. 1978;22:193.
22. Nakayama T, Tanaka H. A numerical mehtod for the analysis of nonlinear sloshing in circular cylindrical containers. Proc. IABEM Symp., Rome. Berlin: Springer-Verlag, 1990.
23. Cao Y, Schultz WW, Beck RF Three-dimensional desingularised boundary integral method fo potential problems. Int. J. Num. Meth. Fluids 1991;12:785.
24. Xu H, Yue D. Computations of fully-nonlinear three-dimensional water waves. Proc. 19th symp. Naval Hydrodynamics, Seoul, 1992.
25. Shyy W An adaptive grid method for Navier-Stokes flow computation. Appl. Math. Comp. 1987;21:201.
26. Shyy W. Computational modeling for fluid flow and interfacial transport. Amsterdam: Elsevier, 1994.
27. Thomson JF, Warsi ZU, Mastin CW. Numerical grid generation. Amsterdam: Elsevier, 1985.
28. Hirt CW, Nichols BD Volume of fluid (VOF) method for the dynamics of free boundaries. J. Comp. Phys. 1981;39:201.
29. Kobayashi R Modelling and numerical simulation of dendritic crystal growth. Physica 1993;D 63:410.
30. Liang PY Numerical method for calculation of surface tension flows in arbitrary grids. AIAA J. 1991;29:161.
31. Sethian JA. Numerical algorithms for propagating interfaces: Hamilton-Jacobi equations and the conservation laws. J. Diff. Geom. 1990; 31: 131. Wheeler AA, Murray BT, Schaefer R. Computations of dendrites using a phase field model. Physica 1993; D 66: 243.
32. Sethian JA. Numerical algorithms for propagating interfaces: Hamilton-Jacobi equations and the conservation laws. J. Diff. Geom. 1990; 31: 131. Wheeler AA, Murray BT, Schaefer R. Computations of dendrites using a phase field model. Physica 1993; D 66: 243.
33. Bayyuk SA, Powell KG, Van Leer B A simulation technique for 2-D unsteady inviscid flows around arbitrarily moving and deforming bodies of arbitrary geometry. AIAA Paper 1993;93:3391.
34. Miyata H, Yamada Y A finite difference method for 3D flows about bodies of complex geometry in rectangular co-ordinate systems. Int. J. Num. Meth. Fluids 1992;14:1261.
35. Miyata H Finite difference simulation of breaking waves. J. Comp. Phys. 1986;65:179.
36. Morinishi K A finite difference solution of the Euler equations on body-fitted Cartesian grids. Comput. Fluids 1992;21:331.
37. Udaykumar HS, Shyy W. Development of a grid-supported marker particle scheme for interface breaking. Num. Heat Transfer 1993;B 27:127.
38. Zeeuw DD, Powell KG An adaptively-refined cartesian mesh solver for the Euler equations. AIAA Paper 1990;90:0000.
39. Mao WQ, Khayat RE Numerical simulation of transient planar flow of a viscoelastic material with two moving free surfaces. Int. J. Num. Meth. Fluids 1995;21:1137.
40. Keunigs R An algorithm for the simulation of transient flows with free surfaces. J. Comp. Phys. 1986;62:199.
41. Khayat RE, Derdouri A, Hebert LP A three-dimensional boundary-element approach to gas-assisted injection molding. J. Non-Newtonian Fluid Mech. 1995;57:253.
42. Park WC, Homsi GM Two-phase displacement and Hele-Shaw cells: theory. J. Fluid Mech. 1984;139:291.
43. Rahman M. Potential flow of fluids. Computational Mechanics Publications, Southampton, 1995.
44. Unverdi SO, Tryggvason G Computations of multi-fluid flows. Physica 1992;D 60:70.
45. Sabau AS, Raad PE. On two-dimensional water-solid impact with VOF methods. In: Raad PE, Huang TT, Tryggvason G, editors. Advances in Numerical Modeling of Free Surface and Interface Fluid Dynamics 1995; FED-Vol. 234: 113.
46. Webster WC The flow about arbitrary, three-dimensional smooth bodies. J. Ship Res. 1975;19:206.
47. Ananthakrishnan P. Nonlinear interaction between air flow and water waves. ONR Workshop on Free-Surface Turbulence Flows, Caltech, 1995.
48. Mei CC Numerical methods in water-wave diffraction and radiation. Ann. Rev. Fluid Mech. 1978;10:393.
49. Frederiksen CS, Watts AM Finite-element method for time-dependent incompressible free surface flow. J. Comp. Phys. 1981;39:282.
50. Faltinsen OM, Michelsen FC. Motions of large structures in waves at zero Froude number. In: Proc. Inst. Symp. Dynamics of Marine Vehicles and Structures in Waves, London, 1974: 375.
51. Dold JW An effective surface-integral algorithm applied to unsteady gravity waves. J. Comp. Phys. 1992;103:90.
52. Dold JW, Peregrine DH. Steep unsteady water waves: an efficient computational scheme. In: Proc. 19th Int. Conf. Coastal Engng., Houston, 1984: 955.
53. Beale JT, Hou TY, Lowengrub J. Stability of boundary integral mehtods for water waves. In: Renardy YY, Coward AV, Papageorgiou DT, Sun SM, editors. Advances in multi-fluid flows, SIAM, 1996.
54. Roberts AJ A stable and accurate numerical method to calculate the motion of a sharp interface between fluids. IMA J. App. Math. 1983;31:13.
55. Moore DW The motion of a vortex layer of small thickness. Stud. App. Math. 1978;58:119.
56. Broeze J, Romate JE Absorbing boundary conditions for free surface simulations with a panel method. J. Comp. Phys. 1992;99:146.
57. Dommermuth DG, Yue DKP, Lin WM, Rapp RJ, Chan ES, Melville WK Deep water plunging breaks: a comparison between potential theory and experiments. J. Fluid Mech. 1988;189:423.
58. Dommermuth DG, Yue DKP Numerical simulations of nonlinear axisymmetric flows with a free surface. J. Fluid Mech. 1987;178:195.
59. Fink PT, Soh WK. Calculations of vortex sheets in unsteady flow and applications in ship hydrodynamics. In: Cooper RD, Doroff SW, editors. Proc. 10th Symp. Naval Hydro., Cambridge, MA, 1974: 463.
60. Baker GR, Meiron DI, Orszag SA Generalized vortex methods for free surface flow problems. J. Fluid Mech. 1982;123:477.
61. Schultz WW, Hong SW Solution of potential problems using an over-determined complex boundary integral method. J. Comp. Phys. 1989;84:414.
62. Brebbia CA, Dominguez J. Boundary elements: an introductory course. Computational Mechanics Publications, New York: McGraw-Hill, 1992.
63. Martinez MJ, Udell KS Axisymmetric creeping motion of drops through circular tubes. J. Fluid Mech. 1990;210:565.
64. Mukherjee S On the corner tensor in three-dimensional linear elasticity. Eng. Anal. Bound. Elem. 1996;18:327.
65. Lee CK, Lou K A direct boundary-element method for three-D wave diffraction and radiation problems. Ocean Engng. 1988;15:431.
66. Rahman M, Satish MG, Xiang Y Wave diffraction due to large offshore structures: a boundary element analysis. Ocean Engng. 1992;19:271.
67. Romate JE Absorbing boundary conditions for free surface waves. J. Comp. Phys. 1992;99:135.
68. Rokhlin V Rapid soluton of integral equations of classical potential theory. J. Comp. Phys. 1983;60:187.
69. Romate JE Local error analysis in 3-D panel methods. J. Engng. Math. 1988;22:123.
70. Romate JE Local error analysis of three-dimensional panel methods in terms of curvilinear surface coordinates. SIAM J. Num. Anal. 1990;27:529.
71. Romate JE On the use of conjugate gradient-type methods for boundary integral equations. Comp. Mech. 1993;12:214.
72. Korsmeyer FT, Yue DKP, Nabors K, White J. Multipole-accelerated preconditioned iterative methods for three-dimensional potential problems. In: Brebbia CS, editor. Boundary Element Methods XV, Computational Mechanics Publications, Southampton, 1993.
73. Isaacson M, Cheung KF Time-domain second-order wave diffraction in three dimensions. J. Waterway, Port, Coastal, and Ocean Engng. 1992;118:496.
74. Murray PE. Numerical simulation of large deformation of inviscid drops. In: Raad PE, Huang TT, Tryggvason G, editors. Advances in numerical modeling of free surface and interface fluid dynamics 1995; FED-Vol. 234: 241.
75. Appel RW An efficient progran for many-body simulation. SIAM J. Sci. Stat. Comp. 1985;6:85.
76. Barnes J, Hut P A hierarchical O(N log N) force-calulation algorithm. Nature 1986;324:446.
77. Greengard L. The rapid evaluation of potential fields in particle systems. Cambridge, MA: MIT Press, 1988.
78. Han PS, Olson MD An adaptive boundary element method. Int. J. Numer. Meth. Eng. 1987;24:1187.
79. Tran-Cong T, Phan-Thien N Three-dimensional study of extrusion processes by boundary element method. I. An implementation of high order elements and some Newtonian results. Rheol. Acta 1988;27:21.
80. Gao DM, Nguyen KT, Garcia-Rejon A, Salloum G Numerical modelling of the mold filling stage in gas-assisted injection molding. Int. Polym. Process. 1998;12:000.
81. Brebbia CA, Telles JCF, Wrobel LC. Boundary element techniques: theory and applications in engineering. Berlin: Springer-Verlag, 1984.
82. Nakayama T, Washizu K The boundary element method applied to the analysis of two-dimensional nonlinear sloshing problems. Int. J. Num. Meth. Engng. 1981;17:1631.
83. Okamoto T, Kawahara M. Large amplitude sloshing analysis in a multi-sloped wall boundary containers by finite element method. In: Proc. Int. Symp. CFD, Nagoya, 1989: 977.
84. Frayce D, Khayat RE, Derdouri A A dual reciprocity approach to three-dimensional transient heat conduction as applied to materials processing. Num. Heat Transfer 1996;A 29:243.
85. Vinje T, Brevig P Numerical simulation of breaking waves. Adv. Water Resources 1981;4:77.
86. Khayat RE, Raducanu P. A coupled finite element/boundary element approach for the three-dimensional simulation of air venting in blow molding, thermoforming. Int. J. Num. Meth. Eng. (in press).
87. Khayat RE, Huneault M, Utracki LA. A boundary element analysis of planar drop deformation in screw channel of a mixing extruder. Eng. Anal. Bound. Elem. 1998;21:155.
88. Khayat RE, Luciani A, Utracki LA Boundary-element analysis of planar drop deformation in confined flow. Part I. Newtonian fluids. Eng. Anal. Bound. Elem. 1997;19:279.
89. Khayat RE, Derdouri A. Transient three-dimensional free surface flow of newtonian and viscoelastic fluids as applied to materials processing. In: Brebbia CA, VanKeer R, editors. Moving boundary problems. Computational Mechanics Publications, Southampton, 1997: 135.
90. Khayat RE, Derdouri A, Frayce D. Boundary-element analysis of three-dimensional transient mixing flows of Newtonian and viscoelastic fluids. Int. J. Num. Meth. Fluids (in press).
91. Bourry D, Godbille F, Khayat RE, Luciani A, Pico J, A, Utracki L. Extensional flow of polymeric dispersions. Polym. Eng. Sci. (in press).