Mixed mode I/III fracture toughness of Armco iron

Acta Materialia

Volumn 46, Issue 14, 1998, Pages 4985-4992

  Kamat, S V ^a   Srinivas, M ^a   Rao, P Rama ^b  

^a DEFENCE METALLURGICAL RESEARCH LABORATORY   (India)

^b JAWAHARLAL NEHRU CENTRE FOR ADVANCED SCIENTIFIC RESEARCH   (India)

Author keywords

[No Author keywords available]

Indexed keywords

CRACKS; DEFORMATION; FRACTURE MECHANICS; FRACTURE TESTING; FRACTURE TOUGHNESS; LOAD TESTING; MATHEMATICAL MODELS;

BLUNTING LINE SLOPE;

IRON;

EID: 0032157287     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-6454(98)00170-0     Document Type: Article

References (40)

1. Pook, L. P., Engng Fract. Mech., 1971, 3, 205.
2. Yoda, M., Engng Fract. Mech., 1980, 13, 647.
3. Miglin, M. T., Lin, I. H., Hirth, J. P. and Rosenfield, A. R., ASTM STP 791. Am. Soc. Test. Mater., 1983, p. 353.
4. Ueda, Y., Ikeda, K., Yao, T. and Aoki, M., Engng Fract. Mech., 1983, 18, 1131.
5. Miglin, M. T., Hirth, J. P. and Rosenfield, A. R., Res. Mechanica, 1984, 11, 85.
6. Liu, Z. H. and Shen, W., Int. J. Fract., 1984, 25, R21.
7. Shah, R. C., ASTM STP 560. Am. Soc. Test. Mater., 1974, p. 29.
8. Schroth, J. G., Hirth, J. P., Hoagland, R. G. and Rosenfield, A. R., Metall. Trans., 1987, 18A, 1061.
9. Rosenfield, A. R. and Duckworth, W. H., Int. J. Fract., 1987, 32, R59.
10. Kamat, S. V., Hirth, J. P. and Mehrabian, R., Scripta metall., 1989, 23, 523.
11. Suresh, S. and Tschegg, E. K., J. Am. Ceram. Soc., 1987, 70, 726.
12. Manoharan, M., Hirth, J. P. and Rosenfield, A. R., Scripta metall., 1989, 23, 763.
13. Manoharan, M., Raghavachary, S., Hirth, J. P. and Rosenfield, A. R., J. Engng Mater. Technol., 1989, 111, 440.
14. Raghavachary, S., Rosenfield, A. R. and Hirth, J. P., Metall. Trans., 1990, 21A, 2539.
15. Manoharan, M., Hirth, J. P. and Rosenfield, A. R., Acta metall. mater., 1991, 39, 1203.
16. Kumar, A. M. and Hirth, J. P., Scripta metall. mater., 1991, 25, 981.
17. Kumar, A. M., Kamat, S. V. and Hirth, J. P., in Proc. of Morris E. Fine Symposium, ed. P. K. Liaw, J. R. Weertman, H. L. Marcus and J. S. Santner, p. 313. TMS, Warrendale, Pennsylvania, 1991.
18. Gordon, J. A., Hirth, J. P., Kumar, A. M. and Moody, N. E., Metall. Trans., 1992, 23A, 1013.
19. Graves, C., M.S. thesis, Washington State University, 1992.
20. Feng, X., Kumar, A. M. and Hirth, J. P., Acta metall. mater., 1993, 41, 2755.
21. Eswara Prasad, N. and Kamat, S. V., Metall. Trans., 1995, 26A, 1823.
22. Kamat, S. V. and Hirth, J. P., Acta mater., 1996, 44, 1047.
23. Kamat, S. V. and Hirth, J. P., J. Engng Mater. Technol., 1995, 117, 391.
24. Kumar, A. M., Hirth, J. P., Hoagland, R. G. and Feng, X., J. Test. Eval., 1994, 22, 327.
25. Manoharan, M., Hirth, J. P. and Rosenfield, A. R., J. Test. Eval., 1990, 18, 106.
26. Annual Book of Standards, Vol. 3.01, ASTM E-813. Am. Soc. Test. Mater., 1994, p. 628.
27. Landes, J. D. and Begley, J. A., ASTM STP 60. Am. Soc. Test. Mater., 1974, p. 170.
28. Paris, P. C., Tada, H., Zahoor, A. and Ernst, H., ASTM STP 668. Am. Soc. Test. Mater., 1979, p. 5.
29. Mills, W. J., J. Test. Eval., 1981, 9, 56.
30. Chipperfield, C. G., Int. J. Fract., 1976, 12, 873.
31. Paranjape, S. A. and Banerjee, S., Engng Fract. Mech., 1979, 11, 43.
32. Yin, S. W., Gerbrands, R. A. and Hartevelt, M., Engng Fract. Mech., 1983, 18, 1025.
33. Doig, P., Smith, R. F. and Flewitt, P. E. J., Engng Fract. Mech., 1984, 19, 653.
34. Srinivas, M., Malakondaiah, G. and Rama Rao, P., Engng Fract. Mech., 1987, 28, 561.
35. Srinivas, M., Malakondaiah, G. and Rama Rao, P., Proc. R. Soc. Lond., 1994, A447, 223.
36. Srinivas, M., Malakondaiah, G. and Rama Rao, P., Scripta metall., 1989, 23, 1627.
37. Srinivas, M., Kamat, S. V. and Rama Rao, P., J. Test. Eval., 1994, 22, 302.
38. Srinivas, M., Ph.D. thesis, Banaras Hindu University, India, 1990.
39. Kumar, A. M., Unpublished research, Washington State University, 1993.
40. Pan, J. and Shih, C. F., J. Mech. Phys. Solids, 1990, 38, 161.