A distributed plasticity model for concrete-filled steel tube beam-columns with interlayer slip

Engineering Structures

Volumn 20, Issue 8, 1998, Pages 663-676

  Hajjar, Jerome F ^a   Schiller, Paul H ^b   Molodan, Aleksandr ^a  

^a University of Minnesota   (United States)

^b BARR ENGINEERING COMPANY   (United States)

Author keywords

Bond; Concrete filled steel tube; Distributed plasticity finite element; Slip

Indexed keywords

BOND STRENGTH (MATERIALS); COLUMNS (STRUCTURAL); CONCRETES; FINITE ELEMENT METHOD; INTERFACES (MATERIALS); MATHEMATICAL MODELS; PLASTICITY; STEEL BEAMS AND GIRDERS; STIFFNESS; STRUCTURAL FRAMES;

CONCRETE-FILLED STEEL TUBES; INTERLAYER SLIP;

COMPOSITE STRUCTURES;

EID: 0032139412     PISSN: 01410296     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0141-0296(97)00107-7     Document Type: Article

References (54)

1. Gourley, B. C., Hajjar, J. F. and Schiller, P. H. 'A synopsis of studies of the monotonic and cyclic behavior of concrete-filled steel tube beam-columns', Report no. ST-93-5.2, Department of Civil Engineering, University of Minneapolis, Minneapolis, MN, 1995
2. Wright, E. W. and Gaylord, E. H. 'Analysis of unbraced multistory steel rigid frames', J. Struct. Div., ASCE 1968, 94(ST5), 1143-1163
3. Alvarez, R. J. and Birnstiel, C. 'Inelastic analysis of multistory multibay frames', J. Struct. Div., ASCE 1969, 95(ST11), 2477-2503
4. Kanchanalai, T. 'The design and behavior of beam-columns in unbraced steel frames', AISI Proj. no. 189, Civil Engineering/Structural Research Laboratory (CESRL) Rep. no. 77-2, Department of Civil Engineering, Structural Research Laboratory, University of Texas, Austin, TX, 1477
5. White, D. W. 'Material and geometric nonlinear analysis of local planar behavior in steel frames using interactive computer graphics', M.S. thesis, Cornell University, Ithaca, NY, 1985
6. Izzuddin, B. A. and Elnashai, A. S. 'Adaptive space frame analysis. Part II: a distributed plasticity approach', Proc. Inst. of Civil Engng 1993, 99, 317-326
7. Challa, V. R. M. and Hall, J. F. 'Earthquake collapse analysis of steel frames', Earthq. Engng Struct. Dyn. 1994, 23(11), 1199-1218
8. Krishnamoorthy, C. S. 'Finite element models for inelastic analysis of reinforced concrete frames and application to limit state design', Computational plasticity: models, software and applications, Owen, D. R. J., Hinton, E. and Onate, E. (eds), Pineridge Press, Swansea, 1987
9. Taucer, F., Spacone, E. and Filippou, F. C. 'A fiber beam-column element for seismic response analysis of reinforced concrete structures', Report no. UCB/EERC-91/17, Earthquake Engineering Research Center, University of California, Berkeley, CA, 1991
10. Chang, G. A. and Mander, J. B. 'Seismic energy based fatigue damage analysis of bridge columns: Part I - evaluation of seismic capacity', Rep. no. NCEER-94-0006, National Center for Earthquake Engineering Research, State University of New York, Buffalo, NY, 1994
11. Izzuddin, B. A., Karayannis, C. G. and Elnashai, A. S. 'Advanced nonlinear formulation for reinforced concrete beam-columns', J. Struct. Engng, ASCE 1994, 120(10), 2913-2934
12. Ahmad, S. H. and Weerakoon, S. L. 'Model for behavior of slender reinforced concrete columns under biaxial bending', ACI Struct. J. 1995, 92(2), 188-198
13. Roik, K. and Bergmann, R. 'Composite columns', Const. Steel Des.: An Int Guide, Dowling, P. J., Harding, J. E. and Bjorhovde, R. (eds), Elsevier Applied Science, London, 1992, pp. 443-469
14. Elnashai, A. S. and Elghazouli, A. Y. 'Performance of composite steel concrete members under earthquake loading: I. Analytical model', Earthq. Engng Struct. Dyn. 1993, 22(4), 315-344
15. El-Tawil, S. and Deierlein, G. G. 'Inelastic dynamic analysis of mixed steel-concrete space frames', Structural Engineering Rep. no. 96-5, School of Civil and Environmental Engineering, Cornell University, Ithaca, NY, 1996
16. Bode, H. 'Columns of steel tubular sections filled with concrete design and applications', Acier Stahl 1976, 11(12), 388-393
17. Bridge, R. Q. 'Concrete filled steel tubular columns', Rep. R283, School of Civil and Mining Engineering, University of Sydney, Sydney, Australia, 1976
18. Tomii, M. and Sakino, K. 'Experimental studies on the ultimate moment of concrete-filled square tubular beam-columns', Trans., Arch. Inst. Japan 1979, 275, 55-63
19. Shakir-Khalil, H. and Zeghiche, Z. 'Experimental behavior of concrete filled rolled rectangular hollow section columns', The Struct. Engineer 1989, 67(19), 345-353
20. Kawaguchi, J., Morino, S., Atsumi, H. and Yamamoto, S. 'Strength deterioration behavior of concrete-filled steel tubular beam-columns', Prof. Third Int. Conf. on Steel-Concrete Comp. Struct., Wakabayashi, M. (ed.), Fukuoka, Japan, 1991, Association of International Cooperation and Research in Steel-Concrete Composite Structures, 1991, pp. 119-124
21. Tsuji, B., Nakashima, M. and Morita, S. 'Axial compression behavior of concrete filled circular steel tubes', Proc. Third Int. Conf. Steel-Concrete Composite Struct., Wakabayashi, M. (ed.), Association International Cooperation and Research in Steel-Concrete Composite Structures, 1991, pp. 19-24
22. Hajjar, J. F., Molodan, A. and Schiller, P. H. 'A distributed plasticity model for cyclic analysis of concrele-filled steel tube beam-columns and composite frames', Engng Struct. 20(4-6), 398-412
23. Gourley, B. C. and Hajjar, J. F. 'Cyclic nonlinear analysis of three-dimensional concrete-filled steel tube beam-columns and composite frames', Report no. ST-94-3, Department of Civil Engineering, University of Minneapolis, Minneapolis, MN, 1994
24. Hajjar, J. F. and Gourley, B. C. 'Representation of concrete-filled steel tube cross-section strength', J. Struct. Engng, ASCE 1996, 122(11), 1327-1336
25. Hajjar, J. F., Gourley, B. C. and Olson, M. C. (for Part II) 'A cyclic nonlinear model for concrete-filled tubes. I: formulation, II: verification', J. Struct. Engng, ASCE 1997, 123(6), 736-754
26. Hajjar, J. F., Gourley, B. C., Schiller, P. H., Molodan, A. and Stillwell, K. A. 'Seismic analysis of concrete-filled steel tube beam-columns and three-dimensional composite frames', Comp. Const. III, Buckner, C. D. and Shahrooz, B. M. (eds), Engineering Foundation, ASCE, NY 1997, pp. 75-88
27. Molodan, A. and Hajjar, J. F. 'A cyclic distributed plasticity model for three-dimensional concrete-filled steel tube beam-columns and composite frames', Rep. no. ST-96-6, Department of Civil Engineering, University of Minneapolis, Minneapolis, MN, 1997
28. Sherman, D. R. 'Tubular members', Const. Steel Des.: An Int. Guide, Dowling, P. J., Harding, J. E. and Bjorhovde, R. (eds), Elsevier Applied Science, London, 1992, pp. 91-104
29. Sully, R. M. and Hancock, G. J. 'Behavior of cold-formed SHS beam-columns', J. Struct. Engng, ASCE 1996, 122(3), 326-336
30. Goel, S. C. and Yamanouchi, H. (eds) Proc. 1992 US-Japan Workshop on Composite and Hybrid Structures, Berkeley, CA, 1992. Research Report, Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI, 1993
31. Virdi, K. S. and Dowling, P. K. 'Bond strength in concrete-filled steel tubes', IABSE Periodica 3/1980, IABSE Proc. P-33/80, 1980, pp. 125-139
32. Tomii, M. 'Bond check for concrete filled steel tubular columns', Comp. and Mixed Constr., Proc. of the US-Japan Joint Sem. on Comp. and Mixed Constr., Roeder, C. W. (ed.), University of Washington, Seattle, WA, ASCE, NY, 1985, pp. 195-204
33. Shakir-Khalil, H. 'Pushout strength of concrete-filled steel hollow sections', The Struct. Engineer 1993, 71(13), 230-233
34. Shakir-Khalil, H. 'Resistance of concrete-filled steel tubes to pushout forces', The Struct. Engineer 1993, 71(13), 234-243
35. Shakir-Khalil, H. and Hassan, N. K. A. 'Push-out resistance of concrete-filled tubes', Tubular structures VI. Grundy, P., Holgate, A. and Wong, W. (eds), Melbourne, Australia, A. A. Balkema. Rotterdam, The Netherlands, 1994, pp. 285-291
36. Lu, Y. Q. and Kennedy, D. J. L. 'The flexural behaviour of concrete-filled hollow structural sections', Can. J. Civil Engng 1994, 21(1), 111-130
37. Dunberry, E., LeBlanc, D. and Redwood, R. G. 'Cross-section strength of concrete-filled HSS columns at simple beam connections', Can. J. Civil Engng 1987, 14, 408-417
38. Shakir-Khalil, H. 'Connection of steel beams to concrete filled tubes', Proc. 5th Int. Symp. Tubular Struct., Nottingham, UK, 1993, pp. 195-203
39. Shakir-Khalil, H. 'Beam connection to concrete-filled tubes', Tubular structures VI, Grundy, P., Holgate, A. and Wong, W. (eds), Melbourne, Australia, A. A. Balkema, Rotterdam, The Netherlands, 1994, pp. 357-364
40. British Standards Institute (BSI) BS 5400: Steel, concrete and composite bridges. Part 5: Code of practice for design of composite bridges, London, British Standards Institution, 1979
41. Architectural Institute of Japan (AIJ) AIJ Standard for structural calculation of mixed tubular steel-concrete composite structures, AIJ, Tokyo, Japan, 1980
42. Bradford, M. A. and Gilbert, R. I. 'Composite beams with partial interaction under sustained loads', J. Struct. Engng, ASCE 1992, 118(7), 1871-1883
43. Amadio, C. and Fragiacomo, M. 'A unite element model for the study of creep and shrinkage effects in composite beams with deformable shear connections', Construzioni Metalliche, 1993, 4, 213-228
44. Aribert, J.-M. 'Influence of slip on composite joint behaviour', Conns. in Stl Structs. III: Beh., Strength and Des. R. Bjorhovde, A. Colson and R. Zandonini (eds), Pergamon, Amsterdam, 1995, pp. 11-22
45. Schiller, P. H. and Hajjar, J. F. 'A distributed plasticity formulation for three-dimensional rectangular concrete-filled steel tube beam columns and composite frames', Report no. ST-96-5, Department of Civil Engineering, University of Minneapolis, Minneapolis, MN, 1996
46. Bathe, K.-J. Finite element procedures in engineering analysis, Prentice-Hall, Englewood Cliffs, NJ, 1982
47. Morales, L. E. 'Object-oriented software for advanced analysis of steel frames', M.S. thesis, Department of Civil Engineering, Purdue University, West Lafayette, IN, 1994
48. Yang, Y. B. and Kuo, S. R. Theory and analysis of nonlinear framed structures, Prentice-Hall, Englewood Cliffs, NJ, 1994
49. Kitada, T. 'Ductility and ultimate strength of concrete-filled steel members', Stability and ductility of steel structures under cyclic loading, Fukumoto, Y. and Lee, G. C. (eds), CRC Press, Boca Raton, FL, 1992, pp. 139-148
50. Shen, C., Mamaghani, I. H. P., Mizuno, E. and Usami, T. 'Cyclic behavior of structural steels. II. Theory', J. Engng Mech., ASCE 1995, 121(11), 1165-1172
51. Chen, E. S. and Buyukozturk, O. 'Constitutive model for concrete in cyclic compression', J. Engng Mech., ASCE 1985, 111, 797-813
52. Cederwall, K., Engstrom, B. and Grauers, M. 'High strength concrete used in composite columns', 2nd Int. Symp. on Utilization of High-Strength Conc., American Concrete Institute, 1991, pp. 195-214
53. American Institute of Steel Construction, Load and resistance factor design specification for structural steel buildings, Second edn. AISC, Chicago, IL, 1993
54. Roeder, C. W. 'Design requirements for shear connectors in encased steel (SRC) and concrete filled tube (CFT) construction', Presentation made at the Third JTCC, U.S./Japan Cooperative Research Program on Composite and Hybrid Structures. Hong Kong, 1996, Department of Civil Engineering, University of Washington, Seattle, WA, 1996