Characterization of spray atomization of 3003 aluminum alloy during linear spray atomization and deposition

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 29, Issue 4, 1998, Pages 793-806

  Zhou, Yizhang ^a,b   Lee, Steven ^a   McDonell, Vincent G ^a   Samuelsen, Scott ^a   Kozarek, Robert L ^a   Lavernia, Enrique J ^a  

^a University of California at Irvine   (United States)

^b ALCOA INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIZATION; DEPOSITION; DROP FORMATION; INTERFEROMETRY; NOZZLES; PRESSURE EFFECTS; SPRAYING;

ALUMINUM ALLOY 3003; AUTER MEAN DIAMETER; LINEAR SPRAY ATOMIZATION; NEAR-NET-SHAPE DEPOSIT; PHASE DOPPLER INTERFEROMETRY (PDI); POSTRUN ANALYSIS;

ALUMINUM ALLOYS;

EID: 0032138583     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-998-0138-3     Document Type: Article

References (44)

1. E.J. Lavemia, J.D. Ayers, and T.S. Srivatsan: Int. Mater. Rev., 1992, vol. 37, pp. 1-44.
2. P.S. Grant:ogr. Mater. Sei., 1995, vol. 39, pp. 497-545.
3. E.J. Lavemia and Y. Wu: Spray Alomization and Deposition, John Wiley & Sons, New York, NY, 1996, pp. 263-381.
4. V.O. McDonell, E.J. Lavemia, and G.S. Samuelsen: in Synthesis and Analysis in Materials Processing: Advances in Characterization and Diagnostics of Ceramics and Metal Paniculate Processing, E.J. Lavemia, H. Henein, and I. Andersen, eds., TMS, Warrendale, PA, 1989, pp. 13-37.
5. P. Mathur, D. Apelian, and A. Lawley: Acta Metall., 1989, vol. 37, pp. 429-33.
6. S. Annavarapu, D. Apelian, and A. Lawley: Metall. Trans. A, 1990, vol. 21A, pp. 3237-56.
7. C.A. Tsao and N.J. Grant: Int. J. Powder Metall., 1994, vol. 30, pp. 323-33.
8. O.P. Pandey and S.N. Ojha: PMI, 1991, vol. 23, pp. 291-95.
9. B.P. Bewlay and B. Cantor: Metall. Trans. B, 1990, vol. 21B, pp. 899-912.
10. A.D. Yule and J.J. Dunkley: Alomization of Melts for Powder Production and Spray Deposition, Clarendon Press, Oxford, United Kingdom, 1994, pp. 247-257 and pp. 309-12.
11. P.D. Prichard and R.P. Dalai: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992. pp. 205-14.
12. A.G. Leatham and A. Lawley: Int. J. Powder Metall., 1993, vol. 29, pp. 321-29.
13. K. Ogata, E. Lavemia, G. Rai, and N.J. Grant: Int. J. Rapid Solidification, 1986, vol. 2, pp. 21-35.
14. P. Mathur, S. Annavarapu, D. Apelian, and A. Lawley: J. Met., 1989, vol. 41 (8), pp. 23-28.
15. A.L. Moran and D.R. White: JOM, 1990, vol. 42 (7), pp. 21-24.
16. R.D. Payne, A.L. Moran, and R.C. Cammarata: Scripta Metall. Mater., 1993, vol. 29, pp. 907-12.
17. R.D. Payne, M. Allen Maltesen, and A.L. Moran: Int. J. Powder Metall., 1993, vol. 29, pp. 345-51.
18. N.J. Grant: in Casting of Near Net Shape Products, Y. Sahai, J.E. Battles, R.R. Carbonara, and C.E. Mobley, eds., TMS-AIME, Warrendale, PA, 1988, pp. 257-72.
19. F.W. Baker, R.L. Kozarek, and G.J. Hildeman: Proc. 2nd Int. Conf. on Spray Forming, J.V. Wood, ed., Woodhead Publishing Limited, 1993. pp. 395-97.
20. V.O. McDonell and G.S. Samuelsen: Combust. Sei. Technol., 1990, vol. 74, pp. 343-59.
21. W.D. Bachalo: Appl. Opt., 1980, vol. 19, pp. 363-70.
22. F.K. Durst and M. Zare: LDA-Symp. 1975 Accuracy of Flow Measurements by Laser Doppler Methods, Copenhagen, Denmark, 1975, pp. 14-16
23. M. Saffman, P. Buchhave, and H. Tanger: Proc. 2nd Int. Symp. on Applications of Laser Anemometry to Fluid Mechanics (Lisbon, Portugal), R.J. Adrian, D.F.G. Durâo, F. Durst, H. Mishina and J.H. Whitelaw, eds., LADOAN, Portugal, 1984, pp. 85-103.
24. K. Bauckhage, H.-H. Flogel, U. Fritsching, and R. Hiller: Proc. 2nd Int. Conf. on Laser Anemometry-Advances and Applications (Strathclyde, Scotland), J. Turner and S. Fraser, eds., Springer-Verlag, 1987, pp. 347-54.
25. J. Domnick, J. Raimann, G. Wolf, A. Berlemont, and M.-S. Cabot: Proc. 7th Int. Conf. on Liquid Atomization and Spray System, Seoul, Korea, 1997, vol. II, pp. 999-1006.
26. P.P. Mäher, P.S. Grant, B. Cantor, and L. Katgerman: Proc. 1st Int. Conf. on Spray Forming, Swansea, UK, 1990, Section 3, Paper 15.
27. B.P. Bewlay and B. Cantor: Mater. Sei. Eng., 1989, vol. Al 18, pp. 207-22.
28. P.S. Grant, P.P. Mäher, and B. Cantor: Mater. Sei. Eng., 1994, vols. A179-180, pp. 72-76.
29. T. Wriedt, K.A. Bauckhage, and A. Shone: IEEE Trans. Instrum. Meas., 1989, vol. 38, pp. 984-90.
30. K.M. Ibrahaim and W.D. Bachalo: Proc. 6th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, July 20-23, 1992, paper no. 21.5.
31. Y. Zhou, S.W. Lee, V.O. McDonell, G.S. Samuelsen, R.L. Kozarek, and E.J. Lavemia: Proc. ILASS-96 (Extended Abstract), San Francisco, CA, May 19-22, 1996.
32. Y. Zhou, S.W. Lee, V.G. McDonell, O.S. Samuelsen, R.L. Kozarek, and E.J. Lavemia: At. Sprays, 1997, vol. 7, pp. 339-58.
33. Annual Book of ASTM Standards, Designation E799-92, ASTM, Philadelphia, PA, 1993, vol. 14.02, pp. 444-48.
34. W.D. Bachalo: Int. J. Multiphase Flow, 1994, vol. 20, suppl., pp. 261-95.
35. E.J. Lavernia, T.S. Srivatsan, and R.H. Rangel: At. Sprays, 1992, vol. 2, pp. 253-74.
36. A. Ünal: Mater. Sei. Technol, 1987, vol. 3, pp. 1029-39.
37. A. Ünal: Mater. Sei. Technol, 1989, vol. 5, pp. 1027-33.
38. A.J. Aller and A. Losada: PMI, 1989, vol. 21 (5), pp. 15-19.
39. F.S. Biancaniello, J.J. Comvay, P.I. Espina, G.E. Mattingly, and S.D. Ridder: Mater. Sei. Eng., 1990, vol. A124, pp. 9-14.
40. H. Lubanska: J. Met., 1970, No. 2, pp. 45-49.
41. T.L. Harvill, J.H. Hoog, and D.i. Holve: Part. Part. Syst. Charact 1995, vol. 12, pp. 309-13.
42. R.A. Robbins, L. Crocco, and I. Glassman: AIAA J., 1963, vol. 1, pp 1882-86.
43. P.O. Feiton: in Liquid Particle Size Measurement Techniques: 2nd Volume, ASTM STP 1083, E.D. Hirleman, W.D. Bachalo, and PQ Felton, eds., ASTM, Philadelphia, PA, 1990, pp. 47-59.
44. D.J. Holve: Powder Bulk Eng., 1994 Feb., pp. 43-49.