Techniques and methodologies for risk analysis in chemical process industries

Journal of Loss Prevention in the Process Industries

Volumn 11, Issue 4, 1998, Pages 261-277

  Khan, Faisal I ^a   Abbasi, S A ^a  

^a PONDICHERRY UNIVERSITY   (India)

Author keywords

hazard assessment; industrial hazard assessment; process safety assessment; quantitative risk assessment; risk assessment

Indexed keywords

CHEMICAL PROCESS INDUSTRIES;

ACCIDENT PREVENTION; CHEMICAL INDUSTRY; HAZARDS; RISK ASSESSMENT;

CHEMICAL OPERATIONS;

EID: 0032127387     PISSN: 09504230     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0950-4230(97)00051-X     Document Type: Article

References (117)

1. Abbasi, S. A., & Venilla, V. (1994). Risk assessment, Encyclopaedia for Environmental Engineering, R. K. Trivadi, Karad: Enviro Media, 239-254.
2. Abbasi, S. A., Krishnakumari, P., & Khan, F. I. (1998). Hot topics: Global warming, acid rain, ozone hole, hazardous waste, industrial disasters, disinfection. New Delhi, Oxford University Press (in press).
3. AIChE. (1994). Dow's Fire and Explosion Index Classification Guide, AIChE Technical Manual, LC 80-29237. New York.
4. AIChE. (1995). Guidelines for Hazard Evaluation Procedures, prepared by Battle Columbus Division. New York.
5. Andow, P. K., Lees, F. P., & Murphy, C. P. (1980). Int. Chem. Eng. Sym. Ser., 58, 225.
6. API. (1992). Management of Process Hazards, Recommended Practice 750. Washington, DC: American Petroleum Institute.
7. Arendt, J. S. (1990). Plant/Operation Progress, 4, 262-268.
8. Arendt, J. S. (1990). Reliability Engineering and System Safety, 29, 133-149.
9. Balemans, A. W. M. (1974). Loss Prevention and Safety Promotion, 1, 7-15.
10. Beckjord, E. S., Cunningham, M. A., & Murphy, J. A. (1993). Reliability Engineering and System Safety, 39, 159-170.
11. Bossche, A. (1991). Reliability Engineering and System Safety, 32, 217-241.
12. Buck, A. F. (1992). Chemical Engineering Progress, 88(6), 90.
13. Camarinpoulous, L., & Yllera, J. (1985). Reliability Engineering, 11(2), 93.
14. CCPS. (1989). Guidelines for Chemical Process Quantitative Risk Analysis (Vol. 32). New York: AIChE.
15. CCPS. (1994). Guidelines for Evaluating the Characteristics for Vapor Cloud Explosions, Flash Fires, and BLEVEs. New York, AIChE.
16. CIA. (1997). A Guide to Hazard and Operability Studies. Chemical Industries Association Ltd. Tonbridge: Tonbridge Printers Ltd.
17. CMA. (1985). Risk Analysis in the Chemical Industry. Rockville, MD: Chemical Manufacturers Association, Government Institute Inc.
18. Cummings, D. L., Lapp, S. A., & Powers, G. J. (1983). J. IEEE Transaction on Reliability, R-, 32, 140.
19. Dow Chemical Company. (1964). Dow's Process Safety Guide. Midland.
20. Dow Chemical Company. (1994). Dow's Chemical Exposure Index. New York: AIChE.
21. Eley, C. (1992). Hydrocarbon Process, 71(8), 97.
22. Environment Protection Act-40CFR part 355. (1987). Washington, DC.
23. Erbink, J. J. (1993). Workshop on Intercomparison of Advanced Practical Short Range Atmospheric Dispersion Modeling, Manno, Switzerland.
24. Erbink, J. J. (1995). Turbulent diffusion model from tall stacks. Ph.D. thesis submitted to VRIJ University, The Netherlands.
25. Freeman, R. A., Lee, R., & MeMamara, T. (1992). Chemical Engineering Progress. (August).
26. Freeman, R. A. (1991). Plant/Operation progress, 10(3), 155.
27. Greenberg, H. R., & Cramer, J. J. (1991). Risk Assessment and Risk Management for Chemical Process Industries. New York: Van Nostrand Reinhold.
28. Guymer, P., Kaiser, G. D., & Mckelvey, T. C. (1987). Chemical Engineering Progress. (January) 37-45.
29. Hauptmanns, U. (1988). Fault Tree Analysis for Process Industries: Engineering Risk and Hazard Assessment, (Kandel and Avani, Eds.). Florida: CRC Press Inc.
30. Hauptmanns, U., & Yllera, J. (1983). Chemical Engineer, 90, 91-103.
31. Henevely, E. J., & Kumanoto, M. (1981). Reliability Engineering and Risk Assessment. New Jersey: Englewood Cliffs.
32. Hessian, R. T., & Rubin, J. N. (1991). Risk Assessment and Risk Management for the CPI (Greenberg and Creamer, Eds.). New York: Van Nostrand.
33. IChemE, (1985). Risk Analysis in the Process Industries, EFCE Publication Series No. 45. Rugby, UK: IChemE.
34. ICI. (1974). Hazard and Operability Studies, Process Safety Report 2. London: Imperial Chemical Industries.
35. ICI. (1982). The Chemical Engineer, 385, 355-367.
36. ILO. (1988). Major Hazard Control: a Practical Manual. Geneva: ILO Office.
37. Insurance Technical Bureau. (1981). IFAL Factor Workbook. London.
38. ISGRA. (1985). Risk analysis in the process industries-an ISGRA update. Plant/Operation Progress (April). 4(2), 63-67.
39. Kafka, F. L. (1984). The 1984 European Major Hazards Conference, London.
40. Kafka, P. (1991), Probabilistic Safety Assessment: Quantitative Process to Balance Design, Manufacturing and Operation for Safety of Plant Structures and Systems. Principal Division Lecture, Transactions SMiRT 11, A Tokyo.
41. Kafka, P. (1993). Important issues using PSA technology for design of new system and plants. GRS mbH 85748 Garchirg, Germany.
42. Kavianian, H. R., Surname, J. K., & Brown, G. V. (1992). Application of Hazard Evaluation Techniques to the Design of Potentially Hazardous Industrial Chemical Processes, Cincinnati, OH: Report Div. of Training and Manpower Development. Nat. Inst. Occup. Safety and Health.
43. Khan, F. I., & Abbasi, S. A. (1995). Journal of Industrial Pollution Control, 11(2), 89-98.
44. Khan, F. I., & Abbasi, S. A. (1995). Analytical Simulation: a Procedure to Conduct FTA in Chemical Process Industries, CPCE/RA 012/95. Pondicherry University, Pondicherry.
45. Khan, F. I., & Abbasi, S. A. (1996). Indian Journal of Chemical Technology, 3, 338-344.
46. Khan, F.I., & Abbasi, S.A. (1997). Journal of Loss Prevention in the Process Industries, 10(3), 191-204.
47. Khan, F. I., & Abbasi, S. A. (1997). Journal of Loss Prevention in the Process Industries, 10(5), 321-334.
48. Khan, F. I., & Abbasi, S. A. (1997). Journal of Loss Prevention in the Process Industries, 10(2), 91-100.
49. Khan, F. I., & Abbasi, S. A. (1997). Journal of Cleaner Production (in press).
50. Khan, F. I., & Abbasi, S. A. (1997). Process Safety Progress, 16(3), 172-185.
51. Khan, F.I., & Abbasi, S.A. (1997). Journal of Loss Prevention in the Process Industries, 10(4), 249-257.
52. Khan, F. I., & Abbasi, S. A. (1997). MOSEC: Modeling and Simulation of Fire and Explosion in Chemical Process Industries. Research report CPCE/RA 21/97. Pondicherry University, Pondicherry.
53. Khan, F. I., & Abbasi, S. A. (1997). Environmental Modeling and Software (in press).
54. Khan, F.I., & Abbasi, S.A. (1997). Indian Journal of Chemical Technology, 4, 167-179.
55. Khan, F. I., & Abbasi, S. A. (1997). Indian Chemical Engineer, B39, 164-172.
56. Khan, F. I., & Abbasi, S. A., (1997) Process Safety Progress. New York (November)
57. Khan, F. I., & Abbasi, S. A. (1997). Hazard Identification and Ranking: a Multi-attribute Technique for Hazard Identification. Research Report CPCE/RA 22/97. Pondicherry University, Pondicherry.
58. Khan, F. I., & Abbasi, S. A. (1997). 2nd International Specialty Conference on Environment Progress in the Petroleum and Petrochemical Industries. (17-19 November) Bahrain.
59. Khan, F. I., Abbasi, & S. A. (1997). Environmental Modeling and Software (communicated)
60. Khan, F. I., & Abbasi, S. A. (1997). Symp. of Air Quality Management at an Urban, Regional, and Global Scale (23-26 September), Istanbul.
61. Khan, F.I., & Abbasi, S.A. (1998). Trans. IChemE, 75B, 217-223.
62. Khan, F. I., & Abbasi, S. A. (1998). Risk assessment in Chemical Process Industries: advanced techniques, New Delhi, Discovery Publishing House (in press).
63. Khan, F. I., & Abbasi, S. A. (1998). Journal of Loss Prevention in the Process Industries (in press).
64. Khan, F.I., Deepa Rani, J., & Abbasi, S.A. (1998). Korean Journal of Chemical Engineering, 15(1), 1-12.
65. Klaassen, K. B., & Van Pepper, J. C. L. (1989). System Reliability Concept and Applications. New York: Chapman and Hall Inc.
66. Kletz, T. A. (1983). HAZOP and HAZAN Notes on the identification and assessment of hazards. Rugby: The Institution of Chemical Engineers.
67. Kletz, T. A. (1985). Chemical Engineer, 92, 48-56.
68. Knowlton, R. E. (1976). R and D Management, 7, 1-8.
69. Knowlton, R. E. (1982). An Introduction to Hazard and Operability Studies. Vancouver, Canada: Chemetics International Ltd.
70. Knowlton, R. E. (1989). Hazard and Operability Studies: The Guide Word Approach. Vancouver, Canada: Chematics International Co.
71. Kolodji, B. P. (1993). Process Safety Progress, 12(2), 127-731.
72. Lai, F. S., Shenoi, S., & Fan, L. T. (1986). Engineering Risk and Hazard Assessment. (Kandel and Avni Eds.). Florida: CRC Press.
73. Lapp, S. A. (1991). ChemTech., 700-704.
74. Lapp, S. A., & Powers, G. J. (1976). Chemical Engineering Progress, 72(4), 89.
75. Lapp, S. A., & Powers, G. J. (1979). J. IEEE Transaction on Reliability, R-, 28, 12.
76. Lawley, H. G. (1974). Chemical Engineering Progress, 70(4), 45-54.
77. Lees, F. P. (1996). Loss Prevention in Process Industries. (Vol. 1-3). London: Butterworths.
78. Lewis, D. J. (1979). The Mond Fire, Explosion and Toxicity Index-a Development of the Dow Index. New York: AIChE on Loss Prevention.
79. Mallikarjunan, M. M., Raghvan, K. V., & Piterson, C. M. (1988). Proceeding of Envirotech International Conference, 21-24 September, Bombay.
80. Marshall, V. C. (1987). Major Chemical Hazards. New York: John Wiley.
81. McKelvey, C. T. (1988). IEEE Transactions on Reliability, 37(2), 167-170.
82. Medermid, J. A., Micholson, M., Pumfrey, D. J., & Fenelon, P. (1996). Experience with the Application of HAZOP to Computer Based Systems. Lect. Notes Department of Computer Science, University of York, Helington.
83. MIL. (1997). Procedure for Performing a Failure Mode Effect Analysis, Report MIL-STD-1629A. Washington, DC: Department of Navy.
84. Montague, D. F. (1990). Reliability Engineering and System Safety, 29(1), 27-33.
85. Mulvihill, R. J. (1988). IEEE Transactions on Reliability, 37(2), 149-153.
86. National Fire Protection Association. (1991). Hazardous Chemical Data, NFPA Code-325M. NJ: NFPA.
87. O'Mara, R. (1991). Risk Assessment and Risk Management for the CPI. (Greenberg and Creamer Eds.). New York: Van Nostrand.
88. Oyeleye, O. O., & Kramer, M. A. (1988). AIChE Journal, 34(9), 1441.
89. Ozog, H., & Stickles, R. P. (1991). Oil and Gas Journal, January, 81-90.
90. Parmer, J. C., & Lees, F. P. (1987). Reliability Engg., 7, 277-303.
91. Pasman, H. J., Duxbury, H. A., & Bjordal, E. M. (1992). Journal of Hazardous Materials, 30, 1-38.
92. Pasquill, F., & Smith, F. B. (1983). Atmospheric Diffusion (3rd edn.). New York: John Wiley.
93. Piccinini, M., & Levy, G. (1984). Canadaian Journal of Chemical Engineering, 62, 547.
94. Popazoglou, I. A., Nivoliantiou, A. O., & Christou, M. (1992). Journal of Loss Prevention in the Process Industries, 5(3), 181-191.
95. Pully, A. S. (1993). Process Safety Progress, 12(2), 106-110.
96. Rauzy, A. (1993). Reliability Engg. and System Safety, 40, 203-211.
97. Rose, J. C., Wells, G. L., & Yeats, B. H. (1978). A Guide to Project Procedure. London: Institution of Chemical Engineers.
98. Scheffler, N. E. (1994). Process Safety Progress, 13(4), 214-218.
99. Shafagi, A., & Cook, B. F. (1988). IEEE Transactions on Reliability, 37(2), 161-165.
100. Sherrod, R. M., & Early, W. F. (1991). Risk Assessment and Management in CPI. (Greenberg and Creamer, Eds.). New York: Van Nostrand.
101. Singh, J., & Munday, G. (1979). IFAL: a model for the evaluation of chemical process losses. Design 79. London: Instn Chem. Engrs.
102. Suokas, J. (1988). Accident Analysis and Prevention, 20(1), 67-85.
103. Sweeny, J. C. (1993). Process Safety Progress, 12(2), 83-90.
104. SYHI. (1993). Environment Protection Act CR-816735. Washington, DC.
105. Tanaka, H., Fan, L. T., Lai, F. S., & Toguchi, K. (1983). IEEE Transactions on Reliability, R-32, 51, 453-456.
106. The Hindu. (1997). Major Fire in Vizag Refinery. The Hindu Publication, 15 September, p. 1.
107. Tyler, B. J. (1982). Plant/Operation Progress, 4, 172.
108. Tyler, B. J., Thomas, A. R., Doran, P., & Grieg, T. R. (1994). A toxicity hazard index. Hazards, XIII, 351.
109. Ulerich, N. (1988). IEEE Transaction on Reliability, 37(2), 171.
110. Van Sciver, G. R. (1990). Reliability Engg and System Safety, 29, 55-68.
111. Van Ulden, A. P. (1988). The Spreading and Mixing of a Dense Cloud in Still Air J. S. Puttock, Ed. Oxford, Clarendon Press.
112. Van Ulden, A. P., & Hostlag, A. A. (1985). Journal of Climate and Applied Meteorology, 24, 1196.
113. Venkatasubramanian, V., & Vaidyanathan, R. (1994). AIChE Journal, 40(3), 496-505.
114. Whitehouse, H. B. (1985). IFAL-a New Risk Analysis Tool. The Assessment and Control of Major Hazards. Rugby: Instn Chem. Engrs. 309.
115. WHO. (1984). Major Hazard Control: A Practical Manual. Geneva: International Labor Office.
116. Yllera, J. (1988). Engineering Risk and Hazard Assessment (Kandel and Avni, Eds.). Florida: CRC Press Inc.
117. Zoller, L., & Esping, J. P. (1993). Hydrocarbon Processing, 72(1), 132B.