Bolted Connection Tests of Thin G550 and G300 Sheet Steels

Journal of Structural Engineering

Volumn 124, Issue 7, 1998, Pages 798-808

  Rogers, Colin A ^a   Hancock, Gregory J ^a  

^a UNIVERSITY OF SYDNEY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

BUILDING CODES; COLD WORKING; FAILURE ANALYSIS; SHEAR STRESS; STEEL SHEET; STRENGTH OF MATERIALS; STRESS CONCENTRATION; STRUCTURAL ANALYSIS; STRUCTURAL MEMBERS; YIELD STRESS;

BOLTED CONNECTIONS; G300 SHEET STEELS; G550 SHEET STEELS;

BOLTED JOINTS;

EID: 0032123634     PISSN: 07339445     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9445(1998)124:7(798)     Document Type: Article

References (29)

1. American Iron and Steel Institute. (1997). "Commentary on the 1996 edition of the specification for the design of cold-formed steel structural members." AISI, Washington, D.C.
2. BHP. (1996). "0.42 G550 commonisation study." BHP Research, Flat Products Division, BHP Steel, Port Kembla, New South Wales, Australia.
3. "Changes to specification and commentary sections C2, E2, E3.2, E3.3 and E5, combined LRFD and ASD." (1996). Ballot C/S96-66B, American Iron and Steel Institute, Washington, D.C.
4. "Code of practice for general structural design and design loadings for buildings - NZS 4203." (1992). Standards New Zealand, Wellington, New Zealand.
5. "Cold formed steel structural members." (1994). S136, Canadian Standards Association, Etobicoke, Ont., Canada.
6. "Cold-formed steel structures - AS/NZS 4600." (1996). Standards Australia/Standards New Zealand, Sydney, New South Wales, Australia.
7. "Commentary on CSA standard S136-94, cold formed steel structural members." (1995). S136.1, Canadian Standards Association, Etobicoke, Ont., Canada.
8. Dhalla, A. K., and Winter, G. (1974a). "Steel ductility measurements." J. Struct. Div., ASCE, 100(2), 427-444.
9. Dhalla, A. K., and Winter, G. (1974b). "Suggested steel ductility requirements." J. Struct. Div., ASCE, 100(2), 445-462.
10. Ellingwood, B., MacGregor, J. C., Galambos, T. V., and Cornell, C. A. (1982). "Probability based load criteria: Load factors and load combinations." J. Struct. Div., ASCE, 108(5), 978-997.
11. European Committee for Standardization. (1996). "Eurocode 3-Design of steel structures, Part 1.3 General rules, Supplementary rules for cold formed thin gauge members and sheeting." Brussels, Belgium.
12. European Convention for Constructional Steelwork. (1983). "ECCSTC7-The design and testing of connections in steel sheeting and sections." Publication No. 21, Delft, The Netherlands.
13. "Guidelines for the development of limit states design." (1981). S408, Canadian Standards Association, Etobicoke, Ont., Canada.
14. Load and resistance factor design-Specification for structural joints using ASTMA 325 or A490 bolts. (1988). Research Council on Structural Connections, American Institute of Steel Construction, Chicago, Ill.
15. Load and resistance factor design-Specification for structural steel buildings. (1993). American Institute of Steel Construction, Chicago, Ill.
16. The making of iron and steel, 7th Ed. (1992). BHP Steel Group, Melbourne, Victoria, Australia.
17. 1996 edition of the specification for the design of cold-formed steel structural members. (1997). American Iron and Steel Institute, Washington, D.C.
18. Rogers, C. A., and Hancock, G. J. (1996). "Ductility of G550 sheet steels in tension-Elongation measurements and perforated tests." Res. Rep. No. R735, Dept. of Civ. Engrg., Univ. of Sydney, Sydney, New South Wales, Australia.
19. Rogers, C. A., and Hancock, G. J. (1997a). "Bolted connection tests of thin G550 and G300 sheet steels." Res. Rep. No. R749, Dept. of Civ. Engrg., Univ. of Sydney, Sydney, New South Wales, Australia.
20. Rogers, C. A., and Hancock, G. J. (1997b). "Ductility of G550 sheet steels in tension." J. Struct. Engrg., ASCE, 123(12), 1536-1594.
21. "SAA loading code, Part 1: Dead and live loads and load combinations - AS1170.1." (1989). Standards Australia, Sydney, New South Wales, Australia.
22. Specification for structural steel buildings-Allowable stress design and plastic design, 1st Ed. (1989). American Institute of Steel Construction, Chicago, Ill.
23. "Standard specification for steel, sheet, carbon, cold-rolled, structural quality." (1994). A611, American Society for Testing and Materials, Philadelphia, Pa.
24. "Standard specification for steel sheet, 55% aluminum-zinc alloy-coated by the hot-dip process." (1994). A792, American Society for Testing and Materials, Philadelphia, Pa.
25. "Standard specification for steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process." (1994). A653, American Society for Testing and Materials, Philadelphia, Pa.
26. "Standard test methods and definitions for mechanical testing of steel products." (1994). A370, American Society for Testing and Materials, Philadelphia, Pa.
27. "Steel sheet and strip-Hot-dipped zinc-coated or aluminium/zinc coated-AS 1397." (1993). Standards Australia, Sydney, New South Wales, Australia.
28. Winter, G. (1956). "Tests on bolted connections in light gage steel." J. Struct. Div., ASCE, 82(2), 920-1-920-25.
29. Zadanfarrokh, F., and Bryan, E. R. (1992). "Testing and design of boltec connections in cold formed steel sections." Proc., 11th Int. Speciality Conf. on Cold-Formed Steel Structures, University of Missouri-Rolla, Rolla, Mo., 625-662.