Alternative Uses of Waste Glasses: Issues on the Fabrication of Metal Fibre Reinforced Glass Matrix Composites

Applied Composite Materials

Volumn 5, Issue 4, 1998, Pages 207-222

  Trusty, P A ^a   Boccaccini, A R ^b,c  

^a UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^b UNIVERSITY OF CALIFORNIA   (United States)

^c ILMENAU UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

Composites; Electrophoretic deposition; Metal fibre reinforcement; Recycling; Waste glass

Indexed keywords

BOROSILICATE GLASS; ELECTRODEPOSITION; FIBER REINFORCED METALS; GLASS FIBERS; IMPURITIES; INFILTRATION; PRESSING (FORMING); SILICA; SINTERING; SOLS; STAINLESS STEEL;

ELECTROPHORETIC DEPOSITION (EPD); METAL FIBER REINFORCED GLASS MATRIX COMPOSITES;

METALLIC MATRIX COMPOSITES;

EID: 0032119447     PISSN: 0929189X     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1008858405686     Document Type: Article

References (35)

1. Donald, I. W., Metcalfe, B. L., and Bye, A. D., 'Preparation of a Novel Unidirectionally Aligned Microwire-Reinforced Glass Matrix Composite', J. Mat. Sci. Lett. 7, 1988, 964-966.
2. Baran, G., Degrange, M., Roques-Carmes, C., and Wehbi, D., Fracture Toughness of Metal Reinforced Glass Composite', J. Mat. Sci. 25, 1990, 4211-4215.
3. Boccaccini, A. R., Ondracek, G., and Syhre, C., 'Borosilicate Glass Matrix Composites Reinforced with Short Metal Fibres', Glastech. Ber. Glass Sci. Technol. 67, 1994, 16-20.
4. Van Landuyt, P., Michel, D., Nicks, L., Streydio, J.-M., Munting, E., and Delannay, F., 'Processing and Characterisation of a Biocompatible Glass Matrix Composite Reinforced with Titanium Fibres', Silicates Industrial 9-10, 1995, 257-259.
5. Dlouhy, I. and Boccaccini, A. R., 'Preparation, Microstructure and Mechanical Properties of Metal Particulate Glass-Matrix Composites', Composites Science and Technology 56, 1996, 1415-1424.
6. Donald, I. W. and Metcalfe, B. L., 'The Preparation, Properties and Applications of Some Glass-Coated Metal Filaments Prepared by the Taylor-Wire Process', J. Mat. Sci. 31, 1996, 1139-1149.
7. Ashby, M. F., Blunt, F. J., and Bannister, M., 'Flow Characteristics of Highly Constrained Metal Wires', Acta Metall. 37, 1989, 1847-1857.
8. Trusty, P. A. and Yeomans, J. A., 'The Toughening of Alumina with Iron - Effects of Iron Distribution on Fracture Toughness', J. Euro. Ceram. Soc. 17(4), 1997, 495-504.
9. Sigl, L. S. and Fischmeister, H. F., 'On the Fracture Toughness of Cemented Carbides', Acta Metall. 36, 1988, 887.
10. Vaidya, R. U. and Subramanian, K. N., 'Effect of Ribbon Orientation on the Fracture Toughness of a Metallic-Glass-Ribbon-Reinforced Glass-Ceramic Matrix Composite', J. Am. Ceram. Soc. 73, 1990, 2962-2964.
11. Ducheyne, P. and Hench, L. L., 'The Processing and Static Mechanical Properties of Metal Fibre Reinforced Bioglass', J. Mat. Sci. 17, 1982, 595-606.
12. Illston, T. J., Ponton, C. B., Marquis, P. M., and Butler, E. G., 'The Manufacture of Woven Fibre Ceramic Matrix Composites Using Electrophoretic Deposition', in P. Duran and J. F. Fernandez (eds), Third Euroceramics, Vol. 1, Faenza Editrice Iberica, Madrid, 1993, pp. 419-424.
13. Trusty, P. A., Boccaccini, A. R., Butler, E. G., and Ponton, C. B., 'Novel Techniques for Manufacturing Woven Fiber Reinforced Ceramic Matrix Composites. I. Preform Fabrication', Mat. and Manuf. Processes 10, 1995, 1215-1226.
14. Boccaccini, A. R., Ovenstone, J., and Trusty, P. A., 'Fabrication of Woven Metal Fibre Reinforced Glass Matrix Composites', Appl. Comp. Mat. 4, 1997, 145-155.
15. Rutkovskij, A. E., Sarkisov, P. D., Ivashin, A. A., and Budov, V. V., 'Glass Ceramic-Based Composites', in V. I. Trefilov (ed.), Ceramic- and Carbon-Matrix Composites, Chapman and Hall, London, 1994, pp. 255-285.
16. Bekitherm, Heat Resistant Separation Materials, N. V. Bekaert and S. A. Zwevegem, Belgium, Product Information.
17. Boccaccini, A. R., Bücker, M., Bossert, J., and Marszalek, K., 'Glass Matrix Composites from Coal Flyash and Waste Glass', Waste Management, 1997 (in press).
18. Jablonski, G. L. and Tyron, S. S., 'Overview of Coal Combustion By-Product Utilization', in Proc. 5th Int. Pittsburgh Coal Conference, University of Pittsburgh, Pittsburgh, PA, 1988, pp. 15-21.
19. Boccaccini, A. R., Köpf, M., and Stumpfe, W., Glass-Ceramics from Filter Dusts from Waste Incinerators', Ceram. Int. 21, 1995, 231-235.
20. Ponton, C. B., Rawlings, R. D., and Rogers, P. S., 'Mechanical Properties of Silceram Glass-Ceramics', Proc. Brit. Ceram. Soc. 37, 1986, 229-234.
21. Lindig, M., 'Recycling von Fernsehglas', Glastech. Ber. Glass Sci. Technol. 67, 1994, N95-N97.
22. Greulich, N. and Hünlich, Th., 'Elution von Bildröhrenglass zur Charakterisierung seines Deponieverhaltens', Glastech. Ber. Glass Sci. Technol. 69, 1996, N77-N81.
23. Brown, I. W. M. and MacKenzie, K. J. D., 'Process Design for the Production of a Ceramic-Like Body from Recycled Waste Glass', J. Mat. Sci. 17, 1982, 2164-2170.
24. Clasen, R., Kravtchenko, I., and Ondracek, G., 'Fibre Preparation from TV Glass for Fibre Reinforced Recycling Products', in H. Warlimont (ed.), Environmental Aspects in Materials Research, DGM Oberursel, 1995, pp. 301-304.
25. Boccaccini, A. R., Bücker, M., Trusty, P. A., Romero, M., and Rincón, J. Ma., 'Sintering Behaviour of Compacts Made from Television Tube (TV) Glasses', Glass Technology 38, 1997, 128-133.
26. Particle Technology Ltd., Borosilicate Glass Batch No. 2210, Derbyshire, UK, Product Information.
27. Pernot, F. and Rogier, R., 'Mechanical Properties of Phosphate Glass-Ceramic-316L Stainless-Steel Composites', J. Mat. Sci. 28, 1993, 6676-6682.
28. Andrews, J. M., Collins, A. H., Cornish, D. C., and Dracass, J., 'The Forming of Ceramic Bodies by Electrophoretic Deposition', Proc. Br. Ceram. Soc. 12, 1969, 211-229.
29. 3+ Ions in Crystalline and Glass Borate Hosts with Comparable Composition', Phys. Chem. Solids. 50(8), 1989, 813-820.
30. Brinker, C. J. and Scherer, G. W., Sol-Gel Science, Academic Press, New York, 1990.
31. Nowack, A., Studienarbeit, RWTH Aachen, Germany, 1996.
32. Trusty, P. A. and Ponton, C. B., Progress Report III to DRA, IRC in Materials, The University of Birmingham, 1994, pp. 1-10.
33. 3 Woven Fibre Reinforced Composites', Advanced Synthesis and Processing of Composites and Advanced Ceramics 1, 1995, 257.
34. Trusty, P. A., Boccaccini, A. R., Butler, E. G., and Ponton, C. B., 'The Development of Mullite Matrix Composites Using Electrophoretic Deposition', Advanced Synthesis and Processing of Composites and Advanced Ceramics 2, 1996, 63-70.
35. Kaya, C., Trusty, P. A., and Ponton, C. B., 'Manufacture of Alumina Fibre/Mullite Multilayer Nanoceramic Matrix Composites Using Electrophoretic Filtration Deposition (EFD) and Optimisation of the Process Parameters', in Proc. 9th International Metallurgy & Materials Congress, Istanbul, Turkey, 1997, pp. 657-662.