Specialty elastomers for automotive applications

Rubber Chemistry and Technology

Volumn 71, Issue 3, 1998, Pages 449-490

  Hashimoto, Kinro ^a   Maeda, Akio ^a   Hosoya, Kiyoshi ^a   Todani, Yoshihiro ^a  

^a ZEON CORPORATION   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ACCIDENT PREVENTION; AUTOMOBILE PARTS AND EQUIPMENT; ENVIRONMENTAL IMPACT; HEAT RESISTANCE; OIL RESISTANCE;

HIGH PERFORMANCE RUBBERS;

SYNTHETIC RUBBER;

EID: 0032108278     PISSN: 00359475     EISSN: None     Source Type: Journal    
DOI: 10.5254/1.3538491     Document Type: Article

References (164)

1. T. Akema and H. Yoshida, Polyfile 25(1), 24 (1987).
2. "Basic Rubber Technology," The Society of Rubber Industry, Japan, 1985.
3. M. Furuya and K. Komuro, "Application and Processing of NBR," 1963.
4. M. Ohwaki, "Rubber Technology Symposium," The Society of Rubber Industry, Japan, December 3, 1990.
5. S. Mizuno and Y. Akao, "Quality Function Deployment," Nippon Kagaku Gijutsu Renmei, 1978.
6. T. Ohishi, Rubber Ind. 23(4), 20 (1987).
7. "Elastomer Manual," Institute of International Synthetic Rubber Producers, 1992.
8. Y. Kubo, J. Soc. Rubber Ind., Jpn. 59, 442 (1986).
9. Y. Ikuta, J. Soc. Rubber Ind., Jpn. 63, 409 (1990).
10. B. Davis, Bur. Rubber J., 176(2), 15 (1994).
11. Motor Fan 5, 169 (1994).
12. Rubber Plast. News, 12(2), 20 (August 16 1982).
13. K. Hashimoto, M. Oyama, N. Watanabe, and Y. Todani, paper No. 5 presented at a meeting of the Rubber Division, American Chemical Society, Cleveland Ohio, October 1-4, 1985 ; abstract in RUBBER CHEM. TECHNOL. 59, 161 (1986).
14. K. Hashimoto, M. Oyama, N. Watanabe, and Y. Todani, paper No. 5 presented at a meeting of the Rubber Division, American Chemical Society, Cleveland Ohio, October 1-4, 1985 ; abstract in RUBBER CHEM. TECHNOL. 59, 161 (1986).
15. "Mechanism of Automobile," Grampri Publishing, 1993.
16. J. Matsuda, Petrotech. (Tokyo) 12(7), 526 (1989).
17. H. Yoshida, J. Soc. Rubber Ind., Jpn. 58, 1451 (1985).
18. J. Igarashi, Monthly Tripology 9, 10 (1992).
19. D. Hertz, Jr., Rubber World 208(6), 22 (1993).
20. Zetpol Broshure Catalog, Nippon Zeon (1985).
21. V. Arcella, V. Albano, E. Barchiesi, G. Brinati, and G. Chiodini, paper No. 65 presented at a meeting of the Rubber Division, American Chemical Society, Louisville, Kentucky, May 19-22, 1992; abstract in RUBBER CHEM. TECHNOL. 65, 863 (1972).
22. V. Arcella, V. Albano, E. Barchiesi, G. Brinati, and G. Chiodini, paper No. 65 presented at a meeting of the Rubber Division, American Chemical Society, Louisville, Kentucky, May 19-22, 1992; abstract in RUBBER CHEM. TECHNOL. 65, 863 (1972).
23. A. Maeda, Polyfile, 30(8), 81 (1993).
24. R. D. DeMarco, Detroit Rubber Group Seminar, October 14, 1993.
25. M. Ohwaki, Soc. Rubber Ind., Jpn. Prepr., 30th summer seminar (1992.7).
26. S. Morita and Terada, Rubber Ind., 30(1), 6 (1994).
27. A. Maeda, J. Soc. Rubber Ind., Jpn. 53(6), 341 (1980).
28. T. Okumoto, Kino Zairyo 3(10), 14 (1983).
29. Y. Tsuzuki, J. Soc. Rubber Ind., Jpn. 62(10), 650 (1989).
30. K. Hashimoto, M. Oyama, N. Watanabe, K. Komatsu, and Y. Todani, SAE Tech. Paper 880026 (1988).
31. K. Hosoya, Polyfile, 25(7), 36 (1988).
32. Souma, Fujita, and Aradaira, Jidosya-gijutsu 47(1), 57 (1993).
33. K. Komuro, "Gomu Kogyo Binran," 3rd ed., The Society of Rubber Industry, Japan, 1973.
34. K. Komuro, Y. Todani, and J. Matsukawa, "Gouseigomu Kakougijutsu Zensyo Nitorirugomu," Taiseisya (1976).
35. D. A. Seil and F. R. Wolf, in "Rubber Technology," 3rd ed., M. Morton, Ed., Van Nostrand Reinhold 1987, p.322.
36. ASTM D-22 Sub-Committee Meeting (1990).
37. W. Hofman, RUBBER CHEM. TECHNOL. 37, 1 (1964).
38. JP77-32085B (1977).
39. JP88-35641B, 88-35642B, 86-41922B.
40. I. Uchida, J. Soc. Rubber Ind., Jpn. 45, 1057 (1972).
41. N. Sugi, J. Soc. Rubber Industry, Jpn. (Nihon Gomu Kyokaishi) 63, 322 (1990).
42. Y. Kubo, Proc. Int. Rubber Conf., Kyoto, Japan, Oct. 15-18 1985, p. 32.
43. "IISRP Elastomer Manual," International Institute of Synthetic Rubber Producers (1989) (1992).
44. G. S. Whitby, "Synthetic Rubber," John Wiley & Sons Inc., New York, 1954.
45. S. Urabe, Polymer Digest (Tokyo) 40, 65 (1988).
46. J. Weir and R. C. Burkey, Rubber Plast. News (Feb. 16, 1989).
47. G. E, Meyer, R. W. Kavchol, and F. J. Naples, RUBBER CHEM. TECHNOL. 46, 106 (1973).
48. T. Kotani and T. Teramoto, J. Soc. Rubber Ind., Jpn. 53, 350 (1980).
49. Y. Mori and S. Nishihata, J. Soc. Rubber Ind., Jpn. 58, 158 (1985).
50. H. Asai, J. Soc. Rubber Ind., Jpn. 58, 133 (1985).
51. T. Inoue and Y. Takemura, "Kouseinou Erasutoma no Kaihatu," J. Furukawa, Ed., Taiseisya, 1979 p. 167.
52. C. D. Weber and M. E. Gross, Adhes. Age 17, 18 (1974).
53. W. J. Abrams, Rubber Age 91, 255 (1962).
54. Zeon Chemicals Europe, Technical Report.
55. Y. Kubo, Shokubai (Catalyst) 32, 218 (1990).
56. J. R. Dunn, D. C. Coulthard, and H. A. Pfisterer, RUBBER CHEM. TECHNOL. 51, 389 (1978).
57. H. Fukuda, Nippon Zeon Technical Report.
58. Zetpol Technical Note, Nippon Zeon Technical Report.
59. K. Hashimoto and Y. Todani, in "Handbook of Elastomers," A. K. Bhowmick and H. L. Stephens, Eds., Mercel Decker Inc., New York, 1988.
60. M. Oyama and N. Watanabe, Polym. Friends 22, 202 (1984).
61. Zetpol Technical Report, Nippon Zeon.
62. N. Asada, "Kobunsi Bunseki Handobukku," Nihon Bunsekikagaku Kai Hen, 1985, p. 485.
63. T. Takeuchi and H. Murase, Koukashi 68, 2505 (1965).
64. A. Kondo, H. Ohtani, Y. Kasuge, S. Tsuge, T. Kubo, N. Asada, H. Inaki, and A. Yoshioka, Macromolecules 21, 2918 (1988).
65. A. J. Marchall, D. T. Jobe, and C. Taylor, rubber 63, 244 (1990).
66. K. Komuro and H. Fukushima, Eng. Mater. 31, 104 (1983).
67. Y. Todani and H. Fukushima, Intern. Combust. Engine 23, 25 (1984).
68. J. Mirza, F. Leibbrandt, and J. Thoermer, SAE Tech. Paper 870193 (1987).
69. L. A. Wood, et al., rubber 16, 244 (1943).
70. V. G. Rebizova, G. M. Bartenev, and A. S. Kosenkova, Sov. Rubber Technol. 25(11), 20 (1966).
71. N. Bekkedhl and R. B. Scott, RUBBER CHEM. TECHNOL. 16, 310 (1943).
72. L. E. Copeland, J. Appl. Phys. 19, 445 (1948).
73. A. A. Tager, et al., Colloid J. USSR 17, 373 (1955).
74. P. Moson, Trans. Faraday Soc. 55, 1461 (1959).
75. R. E. Marris, R. R. James, and C. W. Guyton, Rubber Age 78, 725 (1956).
76. H. Nishizawa, J. Soc. Rubber Industry, Jpn. 46, 688 (1973).
77. C. J. Scheehan, and A. L. Bisso, RUBBER CHEM. TECHNOL. 39, 149 (1966).
78. R. E. Ushold and J. B. Finlay, Appl. Polym. Symp. 25, 205 (1974).
79. D. Oppelt, H. Schuster, J. Thormer, and R. Brden, DOS, 2539132 (1977).
80. A. H. Weinstein, rubber 57, 203 (1984).
81. K. Hashimoto, N. Watanabe, M. Oyama, and Y. Todani, paper presented at a meeting of the Rubber Division, American Chemical Society, Los Angeles, CA, April 24, 1985.
82. S. Hayashi, H. Sakakida, M. Oyama, and T. Nakagawa, rubber 64, 534 (1991).
83. Y. Kubo, Sekiyu Gakkaishi 33, 193 (1990).
84. M. Ishihara, T. Toya, S. Hayashi, and M. Oyama, The Society of Rubber Industry, Japan, Erasutoma Touronkai, Dec. 5, 1991.
85. Nippon Zeon, Technical Report.
86. K. Hashimoto, N. Watanabe, M. Oyama, and Y. Todani, Swedish Institution of Rubber Technology Gothenburg, Sweden, May 17-18, 1984.
87. M. Maeda, Polym. Friends 3, 383 (1960).
88. Nippon Zeon, Taiyugomu no Atarashiitenkai, Kobunshi Gijutsu Kenkyukai, Mar. 18, 1981.
89. J. Matsuda, J. Soc. Rubber Ind., Jpn. 58, 148 (1985).
90. E. W. Stevens, Rubber World, 205 (1), 38 (1990).
91. H. Fukushima and M. Oyama, Polym. Friends 21, 487 (1983).
92. R. W. Keller and B. N. Dinzburg, paper presented at a meeting of the Rubber Division, American Chemical Society, New York, April 8-11, 1986; abstract in RUBBER CHEM. TECHNOL. 59, 676 (1986).
93. R. W. Keller and B. N. Dinzburg, paper presented at a meeting of the Rubber Division, American Chemical Society, New York, April 8-11, 1986; abstract in RUBBER CHEM. TECHNOL. 59, 676 (1986).
94. G. J. Amerongen, J. Polym. Sci. 5, 307 (1950).
95. W. J. Mueller, Rubber Age 81, 982 (1957).
96. R. Ecker; Kautsch. Gummi. 29, 7 (1960).
97. G. Walter, rubber 49, 775 (1976).
98. A. Maeda and K. Hashimoto, Taiyugomu no Taikyusei, Kobunshi Gijutsu Kenkyukai (1981).
99. K. Hashimoto, N. Watanabe, M. Oyama, and Y. Todani, Swedish Rubber Conf., May 21, 1984.
100. SAE Handbook (1990).
101. JIS K 6403 (1981).
102. K. Hashimoto, The Society of Rubber Industry, Japan, Haiteku Semina, Tokyo, Feb. 18, 1992.
103. T. Sugimoto, Polyfile 23, 33 (1986).
104. A. Maeda, K. Hashimoto, and M. Inagami, SAE Tech. Paper 870194 (1987).
105. R. E. Eggers, Rubber World 204 (3), 24 (1991).
106. JIS B 2401.
107. JIS B 2402.
108. JIS K 6380.
109. JP86-1467B.
110. JP84-184235A.
111. R. C. Klingender, N. Watanabe, K. Hashimoto, and M. Oyama, paper no. 38 presented at a meeting of the Rubber Division, American Chemical Society, Cincinatti, Ohio, Oct. 18-21, 1988; abstract in RUBBER CHEM. TECHNOL. 62, 165 (1989).
112. R. C. Klingender, N. Watanabe, K. Hashimoto, and M. Oyama, paper no. 38 presented at a meeting of the Rubber Division, American Chemical Society, Cincinatti, Ohio, Oct. 18-21, 1988; abstract in RUBBER CHEM. TECHNOL. 62, 165 (1989).
113. R. C. Klingender, M. Oyama and Y. Saito, paper no. 62 presented at a meeting of the Rubber Division, American Chemical Society, Mexico City, Mexico, May 9-12, 1989; abstract in RUBBER CHEM. TECHNOL. 62, 777 (1989).
114. R. C. Klingender, M. Oyama and Y. Saito, paper no. 62 presented at a meeting of the Rubber Division, American Chemical Society, Mexico City, Mexico, May 9-12, 1989; abstract in RUBBER CHEM. TECHNOL. 62, 777 (1989).
115. R. C. Klingender, Rubber Roller Group Meeting, New Orleans, LA, U.S.A., Jan. 31, 1990.
116. K. Nishimura, Polyfile 28, 51 (1991).
117. W. G. Bradford and R. C. Klingender, Elastomerics 123(8), 10 (1991).
118. K. Nakao, Polyfile 42, 16 (1987).
119. M. Sato, J. Soc. Rubber Ind., Jpn. 60, 69 (1987).
120. J. Bahnhouse, Zeon Chem. Inc., Not Published (1990).
121. Y. Iwasaki, T. Ohyama, and K. Hashimoto, paper no. 30 presented at a meeting of the Rubber Division, American Chemical Society, Louisville, KY, May 19-22, 1992; abstract in RUBBER CHEM. TECHNOL. 65, 856 (1992).
122. Y. Iwasaki, T. Ohyama, and K. Hashimoto, paper no. 30 presented at a meeting of the Rubber Division, American Chemical Society, Louisville, KY, May 19-22, 1992; abstract in RUBBER CHEM. TECHNOL. 65, 856 (1992).
123. H. Meisenheimer, Rubber World, 204(3), 19 (1991).
124. J. Thormer, J. Mirza, and H. Buding, PRI Rubber Conf., BirMingham, UK, March 12-15, 1984.
125. K. Hashimoto, N. Watanabe, and A. Yoshioka, paper presented at a meeting of the Rubber Division, American Chemical Society, Houston, TX, October 25-28, 1983.
126. N. Watanabe, G. S. Kyker, and K. Hashimoto, paper no. 3 presented at a meeting of the Rubber Division, American Chemical Society, Dallas, TX, April 19-22, 1989; abstract in RUBBER CHEM. TECHNOL. 61, 717 (1988).
127. N. Watanabe, G. S. Kyker, and K. Hashimoto, paper no. 3 presented at a meeting of the Rubber Division, American Chemical Society, Dallas, TX, April 19-22, 1989; abstract in RUBBER CHEM. TECHNOL. 61, 717 (1988).
128. R. C. Klingender, K. Hashimoto, Y. Kubo, M. Oyama, Y, Todani, and N. Watanabe, Energy Rubber Group, Dallas, TX, U.S.A. (1989).
129. D. K. Parker and H. W. Schiessl, paper no. 58 presented at a meeting of the Rubber Division, American Chemical Society, Toronto, Ontario, Canada, May 21-24, 1991.
130. Y. Kubo, O. Mori, K. Ohura, and H. Hisaki, paper no. 29 presented at a meeting of the Rubber Division, American Chemical Society, Washington DC, Oct. 9-12 1990.
131. Zetpol Brochure, Nippon Zeon.
132. Bayer Japan, Tecnical Report.
133. Zeoforte Brochure, Nippon Zeon.
134. Chem. Week 24, 63 (1965).
135. W. D. Willis, L. O. Amberg, A. E. Robinson, and E. J. Vandenberg, et al., Rubber World 153(1), 88
136. E. J. Vandenberg, Rubber Plast. Age 46, 1139 (1965).
137. W. R. Leach, Rubber World 153(11), 71 (1965).
138. Edwin J. Vandenberg (to Hercules Powder Co.) US 3,158,581 (Nov. 24, 1964).
139. H. Asai, Rubber Digest (Tokyo) 24(9), 69 (1972).
140. JP 71-27534B, 72-16196B, 73-7718B, 74-17720B, 74-14880B, 75-6239B, 81-8852B, 81-5117QB, 81-51171B.
141. JP 71-41378B, 73-18599B, 73-18600B, 76-20560B, 76-40920B, 76-23559B.
142. K. Matsumoto and Y. Matoba, J. Soc. Rubber Ind., Jpn. 53, 349 (1990); JP 78-28357B, 86-49343B, 86-58488B.
143. M. Inagami, A. Maeda, and H. Fukushima, Eng. Mater. 28(10), 75 (1980).
144. R. Nagatomi, "Tokusyu Gomu 10 Ko," The Society of Rubber Industry, Japan, 1970 p. 351.
145. H. Fukushima, "Kouseinou Erasutoma no Kaihatsu, Taiseisya," 1979, p. 258.,
146. T. Saito and H. Fukushima, "Gousei Gomu Kako Gijutsu Zensyo 12, Akuriru Gomu, Hidorin Gomu," Taiseisya, 1980, p. 90.
147. Hercules Inc., Technical Data Bulletin ELA-102.
148. N. Yamada, Polym. Digest (Tokyo) 34(12), 59 (1982).
149. A. Maeda, J. Soc. Rubber Ind., Jpn. 58, 185 (1985).
150. M. Inagami, A. Maeda, and H. Fukushima, J. Soc. Rubber Ind., Jpn. 51, 280 (1978).
151. D. P. Raue, Elastomerics 115(5), 17 (1983).
152. S. R. Foster and D. R. Capriotti, SAE Tech. Paper 840408 (1984).
153. K. Hosoya, SAE Tech. Paper 880028 (1988).
154. "Gomu Kogyo Binran," 4th ed., The Society of Rubber Industry, Japan, 1994, p. 311.
155. R. D. Demarco, RUBBER CHEM. TECHNOL. 52, 173 (1979).
156. R. C. Klingender, Meeting at Fort Wayne R&P Group on April 20, 1989.
157. M. Inagami, Polym. Friends 58, 173 (1979).
158. M. Shimizu, "Gomu Haigou no Tatekata," The Society of Rubber Industry, Japan, 1992, v. 3, p. 1.
159. Adeka Argas Chemistry Co. Ltd.: Technical Report "ADKCIZER RS735" (1989).
160. T. Nakagawa, J. Soc. Rubber Ind, Jpn. 58, 396 (1985).
161. M. Shimizu, "Gomuneri Jissenn Sirizu (I)," The Society of Rubber Industry, Japan, 1991.
162. Shinpen Jidousyakogaku Binran, vol. 12, p. 2-23, Jidousya Gijutsukai (1983).
163. Dai 3kai Kogiken Dai 8kai Reikai (1979.6), Zeon-Shi-3, Jidousya Buhin tositeno Taiyusei Gomu no Taikyusei (Nippon Zeon).
164. N. Kamiya, Tokusyu Gousei Gomu 10 ko, The Society of Rubber Industry, Japan, 1970, p. 283.