A survey of time-averaged charactensbcs of laminar and turbulent horseshoe vortices

Journal of Fluids Engineering, Transactions of the ASME

Volumn 120, Issue 2, 1998, Pages 233-242

  Ballio, F ^a   Bettoni, C ^a   Franzetti, S ^a  

^a POLITECNICO DI MILANO   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY LAYER FLOW; KINEMATICS; LAMINAR FLOW; REYNOLDS NUMBER; SHEAR STRESS; TURBULENT FLOW;

HORSESHOE VORTICES; JUNCTION VORTEX SYSTEMS;

VORTEX FLOW;

EID: 0032098755     PISSN: 00982202     EISSN: 1528901X     Source Type: Journal    
DOI: 10.1115/1.2820639     Document Type: Article

References (45)

1. Abid, R., and Schmitt, R., 1986, “Experimental Study of a Turbulent Horseshoe Vortex Using a Three Component Laser Velocimeter,” AIAA Paper 86-1069, May. (1)
2. Agui, J. H., and Andreopoulos, J., 1992, Experimental Investigation of a Three-Dimensional Boundary Layer Flow in the Vicinity of an Upright Wall Mounted Cylinder, ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 114, pp. 566-576. (2)
3. Baker, C. J., 1979, “The Laminar Horseshoe Vortex,” Journal of Fluid Mechanics, Vol. 95, Part 2, pp. 347-367. (3)
4. Baker, C. J., 1980, “The Turbulent Horseshoe Vortex,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 6, 9-23. (4)
5. Baker, C. J., 1985, “The Position of Points of Maximum and Minimum Shear Stress Upstream of Cylinders Mounted Normal to Flat Plates,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 18, pp. 263-274. (5)
6. Bain, J. G., and Fletcher, C. A. J., 1993, “A Computational Study of the Flow in a Bluff Body/Flat Plate Junction,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 46-47, pp. 121-127. (6)
7. Ballio, F., 1995, “Caratterizzazione cinematica e dinamica del campo di moto all’intersezione ostacolo-parete,” Ph.D. thesis, Politécnico di Milano. (7)
8. Belik, L., 1973, “The Secondary Flow About Circular Cylinders Mounted Normal to a Flat Plate,” The Aeronautical Quarterly, Vol. 24, No. 1, pp. 47-54. (8)
9. Bettoni, C., 1995, “Analisi del campo di moto attorno ad un ostacolo cilindrico su fondo piano,” Tesi di Laurea, Politécnico di Milano.
10. Carstens, T., and Sharma, H. R., 1975, “Local Scour Around Large Obstructions,” Proceedings of the XVI Congress of IAHR, July 27-Aug. 1st, San Paolo, Brasil, B32, pp. 251-262.
11. Chen, C. H., and Hung, C. M., 1992, “Numerical Study of Juncture Flows,” AIAA Journal, Vol. 30, No. 7, pp. 1800-1807.
12. Chima, R. V., and Yokota, J. W., 1990, “Numerical Analysis of Three-Dimensional Viscous Internal Flows,” AIAA Journal, Vol. 28, No. 5, 798-806. (10)
13. Coon, M. D., and Tobak, M., 1995, “Experimental Study of Saddle Point of Attachment in Laminar Juncture Flow,” AIAA Journal, Vol. 33, No. 12, pp. 2288-2292.
14. Dargahi, B., 1989, “The Turbulent Flow Field Around a Circular Cylinder,” Experiments in Fluids, Vol. 8, pp. 1-12. (11)
15. Deng, G. B., and Piquet, J., 1992, “Navier-Stokes Computations of Horseshoe Vortex Flows,” International Journal for Numerical Methods in Fluids, Vol. 15, pp. 99-124. (12)
16. De Ponte, S., Gibertini, G., Cerchiari, M., Franzetti, S., and Monti, R., 1994, “Vortical Flow and Skin Friction in a Surface-body Intersection. An Aeronautical and Hydraulic Cooperation,” Proceedings of the. 2nd International Conference on Experimental Fluid Mechanics, July 4-8, Torino, Italy.
17. Devenport, W. J., and Simpson, R. L., 1990, “Time-Dependent and Time-Averaged Turbulence Structure Near the Nose of a Wing-Body Junction,” Journal of Fluid Mechanics, Vol. 210, pp. 23-55. (14)
18. Devenport, W. J., Simpson, R. L., Dewitz, M. B., and Agarwal, N. K., 1992, “Effects of a Leading-Edge Fillet on the Flow Past an Appendage-Body Junction,” AIAA Journal, Vol. 30; No. 9, pp. 2177-2179. (15)
19. Eckerle, W. A., and Awad, J. K., 1991, “Effect of Freestream Velocity on the Three-Dimensional Separated Flow Region in Front of a Cylinder,” ASME JOURNAL OF FLUIDS ENGINEERING, VOL. 113, pp. 37-44. (16)
20. Eckerle, W. A., and Langston, L. S., 1987, “Horseshoe Vortex Formation Around a Cylinder,” ASME Journal of Turbomachinery, Vol. 109, No. 2, pp. 278-285. (17)
21. Fleming, J. L., Simpson, R. L., Cowiing, J. E., and Davenport, W. J., 1993, “An Experimental Study of a Turbulent Wing-Body Junction and Wake Flow,” Experiments in Fluids, No. 14, pp. 366-378.
22. Hölscher, N., and Niemann, H. J., 1987, “Some Aspects About the Flow Around a Surface-Mounted Circular Cylinder in Turbulent Shear Flows,” Proceedings of the 6th Symposium on Turbulent Shear Flows, Toulouse, France, 79 Sept. (18)
23. Hung, C. M., Sung, C. H., and Chen, C. L., 1991, “Computation of Saddle Point of Attachment,” AIAA Paper 91-1713.
24. Khan, M. J., Ahmed, A., and Trosper, J. R., 1995, “Dynamics of the Juncture Vortex,” AIAA Journal, Vol. 33, No. 7, pp. 1273-1278. (19)
25. Kaul, U.K., Kwak, D., and Wagner, G., 1985, “A Computational Study of Saddle Point Separation and Horseshoe Vortex System,” AIAA-Paper n. 850182, Jan. (20)
26. Kubo, K., and Takezawa, M., 1988, “Experimental Study on Horseshoe Vortex in the Upstream Front of Cylindrical Structure,” Modelling Soil-Water-Structure Interactions, Kolkman et al., eds., Balkema, Rotterdam, pp. 117-126. (21)
27. Kubrendran, L. R., McMahon, H. M., and Hubbartt, J. E., 1986, “Turbulent Flow Around a Wing-Fuselage Type Juncture,” AIAA Journal, Vol. 24, No. 9, pp. 1447-1452. (22)
28. Lai, K. Y. M., and Makomaski, A. H., 1989, “Three-Dimensional Flow Pattern Upstream of a Surface-Mounted Rectangular Obstruction,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 3, pp. 449-455. (23)
29. Larousse, A., Martinuzzi, R., and Tropea, C., 1991, “Flow Around Surface-Mounted, Three-Dimensional Obstacles,” Proceedings of the 8th Symposium on Turbulent Shear Flow. (24)
30. Martinuzzi, R., and Tropea, C., 1993, “The flow Around Surface-Mounted, Prismatic Obstacles Placed in a Fully Developed Channel Flow,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 115, pp. 85-92. (25)
31. Mason, P. J., and Morton, B. R., 1987, “Trailing Vortices in the Wakes of Surface-Mounted Obstacles,” Journal of Fluid Mechanics, Vol. 175, pp. 247-293.
32. Merati, P., McMahon, H. M., Yoo, K. M., 1991, “Experimental Investigation of a Turbulent Flow in the Vicinity of an Appendage Mounted on a Flat Plate,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 113, pp. 635-642.
33. Metha, R. D., 1984, “Effect on a Wing Nose Shape on the Flow in a Wing/Body Junction,” Aeronautical Journal, Dec.
34. Monti, R., 1994, “Indagine sperimentale delle caratteristiche fluidodinamiche del campo di moto intorno ad una pila circolare,” Ph.D. thesis, Politecnico di Milano. (26)
35. Oilmen, S. M., and Simpson, R. L., 1994, “Influence of Wing Shapes on Surface Pressure Fluctuations at Wing-Body Junctions,” AIAA Journal, Vol. 32, No. 1, pp. 6-15.
36. Peake, D. J., and Galway, R. D., 1965, “The Three-Dimensional Separation of a Plane Incompressible Laminar Boundary Layer Produced by a Circular Cylinder Mounted to a Flat Plate,” Recent Developments in Boundary Layer Research-AGARDOGRAPH 97, Part 11, pp. 1049-1080. (28)
37. Pierce, F. J., and Harsh, M. D., 1988, “The Mean Flow Structure Around and Within a Turbulent Junction of Horseshoe Vortex-Part II. The Separated and Junction Vortex Flow,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 110, pp. 415-423. (29)
38. Pierce, F. J., and Shin, J., 1992, “The Development of a Turbulent Junction Vortex System,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 114, pp. 559-521. (30)
39. Pierce, F. J., and Tree, I. K., 1990, “The Mean Flow Structure on the Symmetry Plane of a Turbulent Junction Vortex,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 112, pp. 16-22. (31)
40. Qadar, A., 1981, “The Vortex Scour Mechanism at Bridge Piers,” Proceedings Institution of Civil Engineers, Vol. 71, Part 2, pp. 739-757.
41. Rizzetta, D. P., 1994, “Numerical Simulation of Turbulent Cylinder Juncture Flowfields,” AIAA Journal, Vol. 32, No. 6, pp. 1113-1119. (32)
42. Seal C. V., Smith, C. R., Akin, O., and Rockwell, D., 1995, “Quantitative Characteristics of Laminar, Unsteady Necklace Vortex System at a Rectangular Block-Flat Plate Juncture,” Journal of Fluid Mechanics, Vol. 286, pp. 117-135.
43. Thomas, A. S. W., 1987, “The Unsteady Characteristics of Laminar Juncture Flows,” The Physics of Fluids, Vol. 30 (2), pp. 283-285.
44. Visbal, M. R., 1989, “Numerical Investigation of Laminar Juncture Flows,” AIAA-Paper n. 89-1873, June. (33)
45. West, G. S., and Apelt, C. J 1982, “The Effects of Tunnel Blockage and Aspect Ratio on the Mean Flow Past a Circular Cylinder with Reynolds Numbers Between 104 and 10 V’ Journal of Fluid Mechanics, Vol. 114, pp. 361-377.