Polymeric supports for solid phase synthesis

Current Opinion in Chemical Biology

Volumn 2, Issue 3, 1998, Pages 346-352

  Labadie, Jeff W ^a  

^a Argonaut Technologies   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

POLYMER; POLYSTYRENE DERIVATIVE;

CHEMICAL STRUCTURE; DRUG DESIGN; METHODOLOGY; ORGANIC CHEMISTRY; REVIEW;

CHEMISTRY, ORGANIC; DRUG DESIGN; MOLECULAR STRUCTURE; POLYMERS; POLYSTYRENES;

EID: 0032087775     PISSN: 13675931     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1367-5931(98)80008-2     Document Type: Article

References (53)

1. Sherrington DC: Preparation, functionalization and characteristics of polymer supports. In Polymer-supported Reactions in Organic Synthesis. Edited by Sherrington DC, Hodge P. New York: Wiley & Sons, Inc; 1981:1-82.
2. Frechet JMJ: Synthesis and applications of organic supports and protecting groups. Tetrahedron 1981, 37:663-683.
3. Gordon EM, Barrett RW, Dower WJ, Fodor SPA, Gallup MA: Applications of combinatorial technologies to drug discovery. 1. Combinatorial organic synthesis, library screening strategies and future directions. J Med Chem 1994, 37:1385-1401.
4. Czarnik AW, Ellman JA (Eds): Special issue: combinatorial chemistry. Accounts Chem Res 1996, 29:112-170.
5. Thompson LA, Ellman JA: Synthesis and applications of small molecule libraries. Chem Rev 1996, 96:555-600. Library synthesis strategies, including both solution and solid phase methods for small molecule synthesis, are reviewed here.
6. Odian G: Reactions of polymers. In Principles of Polymerization, edn 3. New York: Wiley & Sons Inc; 1991:691-699.
7. Gallop MA, Fitch WL: New methods for analyzing compounds on polymeric supports. Curr Opin Chem Biol 1997, 1:94-100. This is an overview of the most recent developments in characterization on polymer supports, with an emphasis on those most pertinent to solid phase organic synthesis.
8. Backes BJ, Ellman JA: Solid support linker strategies. Curr Opin Chem Biol 1997, 1:86-93. Linkers are an integral part of the polymer support; this review provides a guide to the most recent developments in this field.
9. Regen SL: Influence of solvent on the mobility of molecules covalently bound to polystyrene matrices. J Am Chem Soc 1974, 96:1003-1006.
10. Porco JA, Deegan T, Devonport W, Gooding OW, Heisler K, Labadie JW, Newcomb B, Nguyen C, van Eikeren P, Wong J, Wright P: Automated chemical synthesis: from resins to instruments. Mol Divers 1996, 2:197-206. The use of a Nautilus 2400 automated synthesizer in both solid and solution phase chemistry is described. Automated multistep synthesis using air sensitive reagents were successfully carried out, including optimization of Suzuki, Mitsunobu and Weinreb amide chemistries.
11. Ahrweiler PM, Harness JR, Baker W, Towell JA, Holub D: Automation of parallel synthesis from reagent preparation through sample workup. Am Lab 1997, 10:12-14.
12. Hermkens PHH, Otteheijm HCJ, Ress D: Solid-phase organic reactions: a review of the recent literature. Tetrahedron 1996, 72:4527-4553. This gives examples of solid phase organic synthesis from the years 1992-1995, in graphical format and by reaction type. It provides a good overview of the types of synthetic transformations possible using this technique.
13. Szardenings AK, Burkoth TS, Lu HH, Tien DW, Campbell DA: A simple procedure for the solid phase synthesis of diketopiperazine and diketomorpholine. Tetrahedron 1997, 53:6573-6593.
14. Beebe X, Schore NE, Kurth MJ : Polymer-supported synthesis of 2,5-disubstituted tetrahydrofuran. J Am Chem Soc 1992, 114:10061-10062.
15. Hird NW, Irie K, Nagai K: Solid phase synthesis of 2-aminbutadienes using a piperazine linker. Tetrahedron Lett 1997, 38:7111-7114.
16. Spitzer JL, Kurth MJ, Schore NE, Najdi SD: Polymer-supported synthesis as a tool for improving chemoselectivity; Pauson-Khand reaction. Tetrahedron 1997, 53:6791-6808. Pauson-Khand cycloaddition of polymer-bound alkynes with norbornene is shown to be superior relative to the solution analog. The effect of polymer structure is discussed, including cross-linking, tether length and the type of linker.
17. Schuster M, Pernerstorfer J, Blechert S: Ruthenium-catalyzed metathesis of polymer-bound olefins. Angew Chem Int Ed 1996, 35:1979-1980.
18. Arshady R: Suspension, emulsion, and dispersion polymerization: a methodological survey. Colloid Polym Sci 1992, 270:717-732.
19. Guyot A, Bartholin M: Design and properties of polymers as materials for fine chemistry. Prog Polym Sci 1982, 8:277-332,
20. Farrall MJ, Frechet JMJ: Bromination and lithiation: two important steps in the functionalization of polystyrene resins. J Org Chem 1976, 41:3877-3882.
21. 13C NMR spectroscopy to probe the formation of trityl functional resins and its subsequent conversion to a trityl cation using isotopically enriched starting materials-a good example of the monitoring of chemical transformations on the resin.
22. Borhan B, Wilson JA, Gasch MJ, Ko Y, Kurth DM, Kurth MJ: Suspension copolymerization as a route to trityl-functionalized polystyrene polymers. J Org Chem 1995, 60:7375-7378.
23. Nzeru A, Ebdon JR, Rimmer S: The synthesis of (4-ethenylphenyl)diphenylmethanol. J Org Chem 1997, 62:8928-8929.
24. Lochmann L, Frechet JMJ: Controlled functionalization of polystyrene; introduction of reactive groups by multisite metalation with superbase and reaction with electrophiles. Macromolecules 1996, 29:1767-1771. The use of a superbase was shown to be a more controlled method for melalation of linear polystyrene relative to the standard alkyllithium/N,N,N′,N′-tetramethylethylethylenediamine (TMEDA) procedure. Rapid conversion at room temperature occurs with high selectivity. This should provide an alternative approach for resin modification by the metalation/quench route.
25. Sheng, Q, Stover HDH: Selective functionalization of poly(4-methylstyrene). Macromolecules 1997, 30:6451-6457. The Co(III) oxidation of poly(4-methylstyrene) was shown to afford a seleclive method for the introduction of functionality at the benzylic position. Functionalization occurs through a carbocation intermediate followed by anion quench. The method complements the organometallic metalation procedures.
26. •], using chloride as the nucleophile.
27. Kobayashi S, Moriwaki M: 5-(4-Chloromethylphenyl)pentyl polystyrene resin (CMPP resin). A new linker resin for solid-phase organic synthesis under lewis acid conditions. Tetrahedron Lett 1997, 38:4251-4254.
28. Rapp W: PEG grafted polystyrene tentacle polymers: physicochemical properties and application in chemical synthesis. In Combinatorial Peptide and Nonpeptide Libraries. Edited by Jung G. New York: VCH; 1996:425-464. This chapter provides an overview of TentaGel graft resins, including properties, peptide synthesis, oligonucleotide synthesis and macrobeads as microreaclors.
29. Labadie JW, Deegan TL, Gooding OW, Heisler K, Newcomb, WS, Porco JA Jr, Tran TH, van Eikeren P: New poly(styreneoxyethylene) graft copolymers as supports for solid-phase organic synthesis. Proc Am Chem Soc 1996, 75:389-390, The synthesis and properties of ArgoGel graft resin are described. The effect of graft length and linker on resin physical properties were shown to be related to graft crystallinity by thermal analysis.
30. Zalipsky S, Chang JL, Albericio F, Barany G: Preparation and applications of polyethylene glycol-polystyrene graft resin supports for solid-phase peptide synthesis. Reactive Funct Polym 1994, 22:243-258.
31. Lehr B, Egelhaaf HJ, Fritz H, Rapp W, Bayer E, Oelkrug D: Molecular solvation and mobility in polymer/liquid interphases. A fluorescence study on polystyrene-poly(ethylene glycol) microbeads. Macromolecules 1996, 29:7931-7936. The use of a time-resolved fluorescence to measure rotational mobility of probe molecules bound to TentaGel graft resins. The highest mobility was observed for solvents that solvated both the fluorescence probe and the poly(ethylene glycol) graft. Low mobility was measured in cases where the solvent did not swell the probe or the graft.
32. Quarrell R, Claridge DW, Weaver GW, Lowe G: Structure and properties of tentagel resin beads: implications for combinatorial library chemistry. Mol Divers 1995, 1:223-232.
33. 1H NMR spectra of resin-bound molecules was observed to improve with increasing length of the tether to the polymer backbone, with graft resins providing the best performance.
34. 1H NMR investigations on single macro beads in the suspended state. Angew Chem Int Ed 1996, 35:2867-2868.
35. Ruhland B, Bombrun A, Gallop MA: solid-phase synthesis of 4-arylazetidin-2-ones via Suzuki and Heck cross-coupling reactions. J Org Chem 1997, 62:7820-7826.
36. 2-mediated radical cyclization. J Org Chem 1997, 62:5678-5679.
37. Swayze E: Secondary amide-based linkers for solid phase organic synthesis. Tetrahedron Lett 1997, 38:8465-8468. The use of a electron rich aldehydes on ArgoGel™ resin as a linker system was investigated. Amines were loaded by reductive amination, converted to amides and cleaved under acidic conditions. Poly(ethylene glycol) impurities due to graft decomposition were not observed, even after extended cleavage times.
38. Park BD, Lee HI, Ryoo SJ, Lee YS: Convenient method for preparing polystyrene having B-hydroxy group: its application to the synthesis of polyethylene glycol-grafted polystyrene resin. Tetrahedron Lett 1997, 38:591-594.
39. Swali V, Wells NJ, Langley GJ, Bradley MJ: Solid-phase dendrimer synthesis and the generation of super-high-loading resin beads for combinatorial chemistry. J Org Chem 1997, 62:4902-4903. High loading graft resins were prepared by synthesizing polyamidoamine dendrimers (PAMAM) on TentaGel™ graft resin. Three synthesis cycles afforded a resin with a loading of 2.3-2.8 mmole/g. Polystyrene was not effective when applied as the support.
40. Kempe M, Barany G: Clear: a novel family of highly cross-linked polymeric supports for solid-phase peptide synthesis. J Am Chem Soc 1996, 118:7083-7093. The synthesis of CLEAR supports from trimethylolpropane ethoxylate triacrylate and various comonomers is described. The material's swelling properties, as a function of cross-linking, are unique relative to polystyrene resins. The resins were labile to certain strong bases.
41. Darlak K, Narayana C, Spatola AF: Applications of CLEAR resin for solid phase organic synthesis comparison with polystyrene based resin. In Proceedings of the 5th International Symposium on Solid Phase Synthesis and Combinatorial Libraries. Edited by Epton R. London: Mayflower.
42. Albright RL: Porous polymers as an anchor for catalysis. Reactive Funct Polym 1986, 4:155-174.
43. Shea KL, Stoddard GJ: Chemoselective targeting of fluorescence probes in polymer networks. Detection of heterogeneous domains in styrene-divinylbenzene copolymers. Macromolecules 1991, 24:1207-1209.
44. ArgoPore™ a new macroporous polystyrene for solid phase organic synthesis. Argonaut Technical Bulletin: San Carlos; no DS-015.
45. 13C NMR studies of highly cross-linked poly(divinylbenzene) resins. Macromolecules 1997, 30:2668-2875.
46. Stranix BR, Gao JP, Barghi R, Salha J, Darling GD: Functional polymers from (vinyl)polystyrene. Short routes to binding functional groups to polystyrene resin through a dimethylene spacer: bromine, sulfur, phosphorous, silicon, hydrogen, boron, and oxygen. J Org Chem 1997, 62:8987-8993. Macroporous polymers with high divinylbenzene content were synthesized and shown to have significant residual vinyl groups. These were functionalized using single-step and two-step transformations to afford a variety of functional resins.
47. Geysen HM, Meloen RH, Barteling SJ: Use of peptide synthesis to probe viral antigens for epitopes to a resolution of a single amino acid. Proc Natl Acad Sci USA 1984, 81:3998-4002.
48. Houghten RA: General method for the rapid solid phase synthesis of large numbers of peptides: specificity of antigen-antibody interaction at the level of individual amino acids. Proc Natl Acad Sci USA 1985, 82:5131-5135.
49. Maeji NJ, Valerio RM, Bray AM, Campbell RA, Geysen HM: Grafted supports used with the multipin method of peptide synthesis. Reactive Funct Polymers 1994, 22:203-212.
50. Bunin BA, Plunkett MJ, Ellman: The combinatorial synthesis and chemical and biological evaluation of a 1,4-benzodiazepine library. Proc Natl Acad Sci USA 1994, 91:4708-4712.
51. Moran EJ, Sarshar S, Cargill JF, Shahbaz MM, Lio A, Mjalli AMM, Armstrong RW: Radio Frequency Tag Encoded Combinatorial Library Method for the Discovery of Tripeptide-Substituted Cinnamic Acid Inhibitors of the Protein Tyrosine Phosphotase PTP1B. J Am Chem Soc 1995, 117:10787-10788.
52. Xiao XY, Nova MP: Radiofrequency encoding and additional techniques for the structure elucidation of synthetic combinatorial libraries. In Combinatorial Chemistry Synthesis and Application. Edited by Wilson SR, Czarnik AW. New York: Wiley & Sons Inc; 1997:135-152. Chemical and radiofrequency methods of encoding are discussed. The solid support and a microelectronic memory/transmitter are enclosed in a microreactor, functioning as the polymer object. Information stored in the tag is accessed remotely (75-150 mm) by a reader.
53. Shi Shuhao, Xiao XY, Czarnik AW: A combinatorial synthesis of tryphostins via the 'directed sorting' method. Biotech Bioeng (Comb Chem) 1990, 61:7-12.