Solution of problems and analysis of the stress-strain state of nonuniform anisotropic shells (survey)

International Applied Mechanics

Volumn 33, Issue 11, 1997, Pages 851-880

  Grigorenko, Ya M ^a   Vasilenko, A T ^a  

^a S P TIMOSHENKO INSTITUTE OF MECHANICS   (Ukraine)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; BOUNDARY VALUE PROBLEMS; CALCULATIONS; ELASTICITY; MECHANICS; NUMERICAL METHODS; ORDINARY DIFFERENTIAL EQUATIONS; PLATES (STRUCTURAL COMPONENTS); PROBLEM SOLVING; SHEAR STRESS; STIFFNESS; STRAIN;

NONUNIFORM ANISOTROPIC PLATES; NONUNIFORM ANISOTROPIC SHELLS; STRESS STRAIN STATE;

SHELLS (STRUCTURES);

EID: 0032068582     PISSN: 10637095     EISSN: None     Source Type: Journal    
DOI: 10.1007/bf02700575     Document Type: Article

References (250)

1. L. A. Agolovyan, "Use of the method of asymptotic integration to construct an approximate theory of anisotropic shells," Prikl. Mat. Mekh., 30, No. 2, 388-398 (1966).
2. L. A. Agolovyan and R. S. Gevorkyan, "Nonclassical boundary-value problems of three-layer thermoelastic plates and certain approximations," Tr. XIV All-Union Conference on the Theory of Plates and Shells. Izd. Tblissk. Univ., Tbilisi (1987), Vol. 1, pp. 28-34.
3. L. Ya. Ainola, "Refined theories of Reissner plates," in: Theory of Shells and Plates [in Russian], Izd. AN Arm. SSR, Erevan (1964), pp. 171-177.
4. A. Ya. Aleksandrov, M. Ya. Borodin, and V. V. Pavlov, Structures with Foam-Plastic Fillers [in Russian], Mashinostroenie, Moscow (1972).
5. A. Ya. Aleksandrova and L. M. Kurshin, "Multilayered plates and shells," Tr. VII All-Union Conference on the Theory of Plates and Shells, Nauka, Moscow (1970), pp. 714-721.
6. P. V. Aleksandrov and Yu. V. Nemirovskii, "Stress state of a hyperbolic shell of revolution with a nonuniform reinforcement," Izv. Vyssh. Uchebn. Zaved., Stroit. Arkhit., No. 10, 27-31 (1991).
7. N. A. Alumyae, "Theory of elastic shells and plates," in: Mechanics in the USSR for the Last 50 Years, Vol. 3, Mechanics of Deformable Solids [in Russian], Nauka, Moscow (1972), pp. 227-266.
8. N. A. Alfutov, P. A. Zinov'ev, and B. G. Popov, Design of Multilayered Plates and Shells Made of Composites [in Russian], Mashinostroenie, Moscow (1984).
9. S. A. Ambartsumyan, Theory of Anisotropic Shells [in Russian], Nauka, Moscow (1961).
10. S. A. Ambartsumyan, "Specific features of the theory of shells made of modern materials," Izv. Akad. Nauk Arm. SSR Mekh., 21, No. 4, 3-19 (1968).
11. S. A. Ambartsumyan, General Theory of Anisotropic Shells [in Russian], Nauka, Moscow (1974).
12. S. A. Ambartsumyan, "Certain aspects of the theory of composite shells," Usp. Mekh., 6, No. 3-4, 69-77 (1983).
13. S. A. Ambartsumyan, Theory of Anisotropic Plates [in Russian], Nauka, Moscow (1987).
14. I. G. Amirkahnov, "Fundamental relations of a theory of plates of variable stiffness with allowance for compression and transverse shear," Issled. Teor. Plastin. Obolochek, 10, 167-173 (1973).
15. K. Chamis (ed.), Structural Analysis and Design, Vol. 7: Composite Materials, Mashinostroenie, Moscow (1978).
16. I. I. Argatov, "Evaluating the error of the design of a linearly elastic composite of symmetrical structure as an isotropic plate," Vestn. S.-Peterburg. Univ., Ser. 1, No. 1, 61-66 (1993).
17. Yu. P. Artyukhin, "Design of one-layer and multilayered orthotropic shells for local loads," Issled. Teor. Plastin. Obolochek, No. 4, 91-109 (1966).
18. E. K. Ashkenazi and E. V. Ganov, Anisotropy of Structural Materials [in Russian], Mashinostroenie, Leningrad (1980).
19. A. B. Babkov and A. G. Bondar', "Thermoelastic equilibrium of laminated shells," Mekh. Komp. Mater., No. 4, 492-498 (1992).
20. V. N. Bakulin and A. A. Rassokha, Finite Elements Method and Holographic Interferometry in the Mechanics of Composites [in Russian], Mashinostroenie, Moscow (1987).
21. A. I. Beil', G. G. Portnov, I. V. Sanina, and V. A. Yakushin, "Eliminating initial thermal stresses in wound products by changing the angle of winding through the thickness," Mekh. Komp. Mater., No. 6, 1068-1074 (1980).
22. R. Bellman and R. Kalaba, Quasi-Linearization and Nonlinear Boundary-Value Problems [Russian translation]. Mir, Moscow (1968).
23. V. L. Biderman, Mechanics of Thin-Walled Structures [in Russian], Mashinostroenie, Moscow (1977).
24. I. A. Birger, Circular Plates and Shells of Revolution [in Russian], Oborongiz, Moscow (1961).
25. I. I. Blekhman, A. D. Myshkis, and Ya. G. Panovko, Mechanics and Applied Mechanics: Logic and Features of Applications of Mathematics [in Russian], Nauka, Moscow (1991).
26. N. N. Blumberg and V. P. Tamuzh, "Study of the stress state of a multilayered plate in a refined formulation by the method of boundary functions," Tr. VII All-Union Conference on the Theory of Plates and Shells, Erevan. Univ., Erevan (1980), Vol. 1, pp. 186-191.
27. N. V. Boev and Yu. A. Ustinov, "Accuracy of certain applied theories of spherical three-layer shells," Tr. VII All-Union Conference on the Theory of Plates and Shells, Erevan. Univ., Erevan (1980), Vol. 1, pp. 198-204.
28. V. V. Bolotin, "Theory of reinforced bodies," Izv. Akad. Nauk SSSR Mekh. Mashinostr., No. 1, 74-80 (1965).
29. V. V. Bolotin, I. I. Gol'denblatt, and A. F. Smirnov, Structural Mechanics. Current Status and Prospects [in Russian], Stroizdat, Moscow (1972).
30. V. V. Bolotin and Yu. N. Novichkov, Mechanics of Multilayered Structures [in Russian], Mashinostroenie, Moscow (1980).
31. V. A. Bunakov and A. L. Radovinskii, "Determination of an efficient form for momentless shells of revolution made of high-modulus materials by winding," Mekh. Polim., No. 5, 822-828 (1975).
32. A. M. Butko, "Thermal stress state in the end regions of multilayered shells," Prikl. Mekh., 24, No. 5, 68-75 (1988).
33. A. M. Butko, "Design of orthotropic laminated shells of variable thickness on the basis of a refined model," Prikl. Mekh., 13, No. 7, 28-36 (1977).
34. A. T. Vasilenko, "Allowance for transverse compression in problems of the static of laminated shells," Prikl. Mekh., 22, No. 8, 72-78 (1986).
35. A. T. Vasilenko, "Study of the loading of elliptical anisotropic plates," Dopov. Akad. Nauk. Ukr. RSR, No. 4, 45-49 (1993).
36. A. T. Vasilenko, G. P. Golub, Ya. M. Grigorenko, and N. D. Pankratova, "Effect of shear stiffness on the deformation of anisotropic shells," Tr. X All-Union Conference on the Theory of Plates and Shells, Metsniereba, Tbilisi (1975), Vol. 2, pp. 499-508.
37. A. T. Vasilenko and Ya. M. Grigorenko, "Determination of the stress state of shells of revolution with complex boundary conditions," Prikl. Mekh., 25, No. 2, 28-34 (1989).
38. A. T. Vasilenko and Ya. M. Grigorenko, "Solution of problems and analysis of the stress state of nonuniform anisotropic shells on the basis of models of different levels of complexity," Prikl. Mekh., 29, No. 10, 77-86 (1995).
39. A. T. Vasilenko and Ya. M. Grigorenko, "Study of the deformation of shells of revolution in unilateral contact with an elastic foundation," Prikl. Mekh., 32, No. 12, 50-54 (1996).
40. A. T. Vasilenko, Ya. M. Grigorenko, and N. D. Pankratova, "Stress state of transversely isotropic nonuniform thickwalled spherical shells," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 1, 59-65 (1976).
41. A. T. Vasilenko, Ya. M. Grigorenko, and G. K. Sudavtsova, "Analysis of the stress-strain state of elastic systems of anisotropic shells of revolution and rings," Raschety Prochn., No. 32, 57-67 (1990).
42. A. T. Vasilenko, O. V. Oesechko, and G. K. Sudavtsova, "Interaction of anisotropic shells with elastic supports of arbitrary stiffness," Dopov. Akad. Nauk Ukr. RSR, No. 9, 64-67 (1994).
43. A. T. Vasilenko and P. I. Savchenko, "Study of the effect of anisotropic elastic properties on the stress state of shells of revolution," Prikl. Mekh., 25, No. 11, 44-49 (1989).
44. A. T. Vasilenko and P. I. Savchenko, "Solution of the problem of the bending of a circular plate with rectilinearly anisotropic elastic properties," Dopov. Akad. Nauk Ukr. RSR, No. 4, 35-41 (1992).
45. A. T. Vasilenko and N. G. Stepanenko, "Solution of the problem of the bending of rectangular plates compliant in transverse shear," Prikl. Mekh., 23, No. 8, 78-83 (1987).
46. A. T. Vasilenko and G. K. Sudavtsova, "Deformation of thin nonuniform shallow shells," Prikl. Mekh., 31, No. 3, 60-66 (1995).
47. A. T. Vasilenko and G. K. Sudavtsova, "Stress distribution in asymmetrically loaded anisotropic shells of revolution of variable stiffness," Probl. Prochn., No. 4, 3-31 (1995).
48. V. V. Vasil'ev, "Some problems of shell theory connected with the features of modern structural materials," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 5, 178-188 (1987).
49. V. V. Vasil'ev, Mechanics of Structures Made of Composite Materials [in Russian], Mashinostroenie, Moscow (1988).
50. I. N. Vekua, General Methods of Constructing Variants of Shell Theory [in Russian], Nauka, Moscow (1982).
51. Zh. R. Vinson and R. A. Sirakovskii, Behavior of Structures Made of Composites [in Russian], Metallurgiya, Moscow (1991).
52. V. V. Vlasov, "Bending of multilayered rods and plates during heating," in: Current Problems of the Strength and Reliability of Elastic Systems [in Russian], Moscow (1987), pp. 30-40.
53. V. Z. Vlasov, Thin-Walled Elastic Rods [in Russian], Fizmatgiz, Moscow (1959).
54. I. I. Vorovich, "Some results and problems of the asymptotic theory of plates, and shells," Materials of the I All-Union Conference on the Theory and Numerical Methods of Design of Shells and Plates, Tblissk. Univ., Tbilisi (1975), pp. 51-150.
55. I. I. Vorovich and M. A. Shlenev, Plates and Shells: Scientific Findings [in Russian], VINITI (All-Union Institute of Technical Information): Mechanics (1963).
56. V. M. Vydrin, "Design of combination pressure cylinders of composites with a nongeodesic winding," in: Dynamics and Strength of Mechanical Systems [in Russian]. Perm. Politekh. In-t, Perm' (1991), pp. 24-30.
57. Sh. K. Galimov, "Refined theories of the design of rectangular orthotropic plates under transverse loads," Prikl. Mekh., 10, No. 5, 17-26 (1974).
58. A. K. Galinysh, "Design of plates and shells on the basis of refined theories," Issled. Teor. Plastin. Obolochek, No. 5, 66-92 (1967); No. 6-7, 23-64 (1970).
59. A. K. Galinysh, "Design of plates and shells on the basis of refined theories," Issled. Teor. Plastin. Obolochek, No. 5, 66-92 (1967); No. 6-7, 23-64 (1970).
60. M. S. Ganeeva and L. A. Kosolapova, "Study of the stress state of nonthin compound shells of revolution made of a heat-sensitive material and subjected to asymmetric thermomechanical loading," Studies in the Theory of Shells: Transactions of a Seminar, Kazan' (1992), Vol. 27, pp. 68-78.
61. S. K. Godunov, "Numerical solution of boundary-value problems for systems of linear ordinary differential equations," Usp. Mat. Nauk, 16, No. 3, 171-174 (1961).
62. A. K. Gol'denveizer, "Toward a theory of Reissner plates," Izv. Akad. Nauk, SSSR Otd. Tekh. Nauk, No. 4, 102-109 (1958).
63. A. L. Gol'denveizer, Theory of Thin Elastic Shells [in Russian], Nauka, Moscow (1976).
64. E. I. Grigolyuk, "Thin bimetallic shells and plates," Inzh. Sb., 17, 177-200 (1953).
65. E. I. Grigolyuk, "Equations of three-layer shells with a lightweight filler," Izv. Akad. Nauk SSSR Otd. Tekh. Nauk, No. 1, 77-84 (1957).
66. E. I. Grigolyuk and F. A. Kogan, "Current state of the theory of multilayered shells," Prikl. Mekh., 8, No. 6, 3-18 (1972).
67. E. I. Grigolyuk and G. M. Kulikov, Multilayered Reinforced Shells [in Russian], Mashinostroenie, Moscow, Moscow (1988).
68. E. I. Grigolyuk, Ya. S. Podstrigach, and Ya. I. Burak, Optimization of the Heating of Shells and Plates [in Russian], Nauk. Dumka, Kiev (1979).
69. E. I. Grigolyuk and I. T. Selezov, "Nonclassical theories of the vibrations of rods, plates, and shells," in: Scientific Findings [in Russian], Vol. 5, VINITI (All-Union Institute of Technical Information): Solid Mechanics (1973).
70. E. I. Grigolyuk and V. M. Tolkachev, Contact Problems of the Theory of Plates and Shells [in Russian], Mashinostroenie, Moscow (1980).
71. E. I. Grigolyuk and P. P. Chulkov, "Nonlinear equations of laminated elastic anisotropic shells with a rigid filler," Izv. Akad. Nauk SSSR Mekh., No. 5, 68-80 (1965).
72. E. I. Grigolyuk and P. P. Chulkov, Stability and Vibration of Three-Layer Shells [in Russian], Mashinostroenie, Moscow (1973).
73. E. I. Grigolyuk, Isotropic and Anisotropic Shells of Revolution of Variable Stiffness [in Russian], Nauk. Dumka, Kiev (1973).
74. E. I. Grigolyuk and A. T. Vasilenko, "Numerically solving boundary-value problems on the stress state of shells of revolution on a computer," Annot. Documents of the V All-Union Conference on the Theory of Plates and Shells. Nauka, Moscow (1965), pp. 18-19.
75. E. I. Grigolyuk and A. T. Vasilenko, Theory of Shells of Variable Stiffness (Vol. 4 of Methods of Shell Design) [in Russian], Nauk. Dumka, Kiev (1981).
76. E. I. Grigolyuk, and A. T. Vasilenko, Problems of the Statics of Anisotropic Shells with Finite Shear Stiffness [in Russian], Nauka, Moscow (1992).
77. E. I. Grigolyuk, A. T. Vasilenko, and G. P. Golub, Statics of Anisotropic Shells with Finite Shear Stiffness [in Russian], Nauk. Dumka, Kiev (1987).
78. E. I. Grigolyuk, A. T. Vasilenko, and N. D. Pankratova, Design of Noncircular Cylindrical Shells [in Russian], Nauk. Dumka, Kiev (1977).
79. E. I. Grigolyuk, A. T. Vasilenko, and N. D. Pankratova, "Evaluating the assumptions of the theory of three-layer shells with a filler," Prikl. Mekh., 20, No. 5, 19-25 (1984).
80. E. I. Grigolyuk, A. T. Vasilenko, and N. D. Pankratova, Statics of Anisotropic Thick-Walled Shells [in Russian], Vishcha Shk., Kiev (1985).
81. E. I. Grigolyuk, A. T. Vasilenko, and N. D. Pankratova, Problems of the Theory of Elasticity of Nonuniform Bodies [in Russian], Nauk. Dumka, Kiev (1991).
82. V. I. Gulyaev, V. A. Bazhenov, and P. P. Luzunov, Nonclassical Theory of Shells and Its Use for Solving Engineering Problems [in Russian], Vishcha Shk., Lvov (1978).
83. A. G. Gurtovyi and V. T. Piskunov, "New theoretical models and comparison of approximate refined and exact three-dimensional solutions of the problem of the bending of laminated anisotropic plates," Mekh. Komp. Mater., No. 1, 93-101 (1988).
84. N. G. Gur'yanov, "Asymptotic analysis of the stress-strain state of a circular multilayered plate," Studies in the Theory of Shells. Tr. Seminar, Kazan' (1991), Vol. 23, pp. 33-44.
85. S. T. Gulati and O. Ozalteen, "Bending of nonuniform plates with an asymmetric change in thickness with allowance for shear strains," AIAA J., 11, No. 1, 59-63 (1973).
86. O. N. Demchuk, "Comparison of approximate refined and exact three-dimensional solutions of the problem of the thermoelasticity of laminated anisotropic plates," Mekh. Komp. Mater., No. 2, 216-226 (1995).
87. A. G. Dobir, "Certain features of the decay of the stress state in a laminated orthotropic plate loaded on its edges by self-balanced systems of stresses," in: Problems of the Design and Construction of Aircraft Structures [in Russian], Moscow (1985), pp. 97-103.
88. A. A. Dudenko, S. A. Lur'e, and I. F. Obraztsov, Anisotropic Plastics and Shells: Scientific Findings [in Russian], Vol. 15, pp. 126-140, VINITI (All-Union Institute of Technical Information): Solid Mechanics (1963).
89. S. M. Durgar'yan, "Design of thin orthotropic shells of revolution for thermal loading," Inzh. Zh., 2, No. 2, 126-140 (1962).
90. S. M. Durgar'yan, "Design of an orthotropic plate for thermal loading with allowance for transverse shear," Izv. Akad. Nauk SSSR Otd. Tekh. Nauk Mekh. Mashinostr., No. 6, 154-160 (1962).
91. S. M. Durgar'yan and A. P. Khalatyan, "Solution of a problem of thermoelasticity for a heat-sensitive orthotropic shell with finite shear stiffness," Tr. VII All-Union Conference on the Theory of Plates and Shells, Erevan. Univ., Erevan (1980), Vol. 2, pp. 117-123.
92. A. N. Elpat'evskii and V. V. Vasil'ev, Strength of Cylindrical Shells Made of Reinforced Materials [in Russian], Mashinostroenie, Moscow (1972).
93. V. A. Eltyshev, Stress-Strain State of Shell Structures with a Filler [in Russian], Nauka, Moscow (1981).
94. Yu. P. Zhigalko, "Design of thin elastic cylindrical shells for local loads," Issled. Teor. Plastin. Obolochek, 4, 3-41 (1966).
95. I. Zikell, "Pressure vessels of uniform strength," AIAA J., 1, No. 6, 120-122 (1962).
96. V. K. Ivanov, "Momentless joining of the cylindrical part and the bottom of a pressure vessel," Mekh. Komp. Mater., No. 6, 1064-1068 (1986).
97. V. K. Ivanov, "Differential equations of the thermoelasticity of glass-plastic shells of arbitrary form," Issled. Teor. Plastin. Obolochek, 10, 173-181 (1973).
98. M. A. Il'gamov, V. A. Ivanov, and B. V. Gulin, Design of Shells with an Elastic Filler [in Russian], Nauka, Moscow (1987)
99. A. V. Kadesnikov and G. I. Prokof ev, "Effect of the width of the reinforcing material on the structure of the reinforcement of shells," Mekh. Komp. Mater., No. 6, 1119-1121 (1989).
100. Kapanua, "Methods of designing laminated shells. Survey," Sovrem. Mashinostr. Ser. B, No. 12, 1-11 (1995).
101. A. M. Karmishin, "Equations of nonuniform thin-walled elements based on minimum stiffnesses," Prikl. Mekh., 10, No. 6, 34-42 (1974).
102. A. V. Karmishin, A. V. Lyaskovets, V. I. Myachenkov, and A. N. Frolov, Statics and Dynamics of Thin-Walled Shell Structures [in Russian], Mashinostroenie, Moscow (1975).
103. N. A. Kil'chevskii, "Analysis of different methods of reducing three-dimensional problems of the theory of elasticity to two-dimensional problems and investigation of the formulation of boundary-value problems of shell theory," in: Theory of Plates and Shells [in Russian], Izd. AN Ukr. RSR, Kiev (1962), pp. 58-69.
104. Principles of the Analytical Mechanics of Shells [in Russian], Izd. AN Ukr. RSR, Kiev (1963).
105. V. N. Kobelev, L. I. Kovarskii, and S. I. Tomofeev, Design of Three-Layer Structures [in Russian], Mashinostroenie, Moscow (1984).
106. G. B. Kolchin, Theory of Elasticity of Nonuniform Bodies (bibliography of domestic and foreign literature), Shtiintsa, Kishenev (1972).
107. Yu. M. Kolyano, Methods of Determining the Thermal Conductivity and Thermoelasticity of Nonuniform Bodies [in Russian], Nauk. Dumka, Kiev (1992).
108. G. L. Komissarova, V. G. Klyuchnikova, and V. N. Nikitenko, "Evaluating the range of application of approximate theories of laminated plates," Prikl. Mekh., 15, No. 6, 131-134 (1979).
109. V. V. Vasil'ev, V. D. Protasov, V. V. Bolotin, et al., Composite Materials: Handbook [in Russian], Mashinostroenie, Moscow (1990).
110. V. I. Korolev, "Thin two-layer plates and shells," Inzh. Sb., 22, 98-100 (1955).
111. V. I. Korolev, Laminated Anisotropic Plates and Shells of Reinforced Plastics [in Russian], Mashinostroenie, Moscow (1965).
112. V. I. Korolev, Elastoplastic Deformation of Shells [in Russian], Mashinostroenie, Moscow (1971).
113. A. A. Kravchenko and M. N. Salopaev, "One approach to realization of the finite-element method in shear models to solve problems for axisymmetric shells," Prikl. Probl. Prochn. Plastichnosti, 30, 54-60 (1985).
114. L. M. Kurshin, "Equations of cylindrical three-layer shells," Izv. Akad. Nauk SSSR Otd. Tekh. Nauk, No. 3, 142-144 (1958).
115. L. M. Kurshin, "Survey of studies of the design of three-layer plates and shells," Raschet Prostranstvennykh Konstruktsii, 7, 163-192 (1962).
116. S. G. Lekhnitskii, Anisotropic Plates [in Russian], Gostekhizdat, Moscow-Leningrad (1947).
117. S. G. Lekhnitskii, Theory of Elasticity of Anisotropic Bodies [in Russian], Nauka, Moscow (1977).
118. L. Libresku, "Toward a refined linear theory of anisotropic elastic shells," Mekh. Polim., No. 6, 1038-1050 (1975).
119. N. A. Lobkova, "Equations of the theory of thin nonuniform plates in cylindrical coordinates," Prikl. Mekh., 3, No. 7, 37-44 (1967).
120. N. A. Lobkova and L. A. Il'in, "Toward a theory of thin nonuniform plates," Prikl. Mekh., 1, No. 8, 30-39 (1965).
121. S. Lukasevich, Local Loads in Plates and Shells [Russian translation], Mir, Moscow (1982).
122. A. Love, Mathematical Theory of Elasticity [Russian translation], ONTI, Moscow-Leningrad (1935).
123. V. N. Maksimenko, "Elastic behavior of anisotropic shells subjected to concentrated edge loads," Tr. VII All-Union Conference on the Theory of Plates and Shells, Erevan. Univ., Erevan (1980), Vol. 3, pp. 49-53.
124. V. A. Maksimyuk and I. S. Chernyshenko, "Numerical solution of problems for shells of variable thickness with allowance for transverse shear," Prikl. Mekh., 27, No. 3, 59-62 (1991).
125. A. K. Malmeister, V. P. Tamuzh, and G. A. Teters, Strength of Polymers and Composites [in Russian], Zinatne, Riga (1980).
126. Marketos, "Optimum toroidal pressure vessel formed by fibers wound along geodesic lines," AIAA J., 1, No. 8, 223-226 (1963).
127. Mau, "Refinement of the theory of laminated plates," Trans. ASME, No. 2, 293-294 (1973).
128. A. A. Medvedev and V. D. Protasov, "Refinement of the stiffness and elastic characteristics of spiral-wound bottoms of vessels in the region of the polar openings," Mekh. Komp. Mater., No. 3, 485-488 (1990).
129. A. A. Medvedev and V. V. Fedorov, "Momentless contact of an undeformable flange with a shell of revolution made by winding a ribbon of finite width," Mekh. Komp. Mater., No. 3, 546-550 (1991).
130. Z. A. Medvedev, "Effect of transverse shear strains on the stress state of plates that are nonuniform through the thickness," Prikl. Mekh., 24, No. 1, 80-88 (1988).
131. A. N. Guz', I. S. Chernyshenko, Val. N. Chekhov, et al., Methods of Shell Design. Vol. 1. Theory of Thin Shells Weakened by Holes [in Russian], Nauk. Dumka, Kiev (1980).
132. A. N. Guz', Ya. M. Grigorenko, I. Yu. Babich, et al., Mechanics of Composite Materials and Structural Elements, Vol. 2, Mechanics of Structural Elements [in Russian], Nauk. Dumka, Kiev (1983).
133. A. B. Mitkevich and V. D. Protasov, "Equilibrium lightweight glass-plastic pressure cylinders made by nongeodesic winding," Mekh. Polim., No. 6, 983-987 (1975).
134. A. B. Mitkevich and V. D. Protasov, "Form of a pressure-vessel bottom having uniform shear strength and made by nongeodesic winding," Mekh. Komp. Mater., No. 2, 344-346 (1988).
135. L. A. Movsiyan, "Design of an anisotropic (nonuniform) cylindrical shell of revolution," Izv. Akad. Nauk Arm. SSR Ser. Fiz. Mat. Nauk, 12, No. 4, 89-107 (1959).
136. V. V. Mozharovskii and V. E. Starzhinskii, Applied Mechanics of Laminated Composites [in Russian], Nauka i Tekhnika, Minsk (1988).
137. I. A. Motovilovets and V. I. Kozlov, Thermoelasticity. Vol. 1 of Mechanics of Coupled Fields in Structural Elements [in Russian], Nauk. Dumka, Kiev (1987).
138. Kh. M. Mushtari, "Theory of slabs of moderate thickness," Izv. Akad. Nauk SSSR Otd. Tekh. Nauk, No. 2, 107-113 (1959).
139. Kh. M. Mushtari, "Applicability of different theories of three-layer plates having an asymmetrical structure and a filler," Izv. Akad. Nauk SSSR Otd. Tekh. Nauk Mekh. Mashinostr., No. 5, 176-178 (1969).
140. Kh. M. Mushtari and I. G. Teregulov, "Theory of shallow orthotropic shells of moderate thickness," Izv. Akad. Nauk SSSR Otd. Tekh. Nauk Mekh. Mashinostr., No. 6, 60-67 (1959).
141. V. I. Myachenkov and I. V. Grigor'ev, Design of Shell Structures on a Computer [in Russian], Mashinostroenie, Moscow (1981).
142. V. I. Myachenkov and V. P. Mal'tsev, Methods and Algorithms for Designing Three-Dimensional Structures on a Computer [in Russian], Mashinostroenie, Moscow (1984).
143. Yu. V. Nemirovskii and B. S. Reznikov, Strength of Structural Elements Made of Composites [in Russian], Nauka, Novosibirsk (1986).
144. Yu. V. Nemirovskii and G. I. Starostin, "Possibilities of realization of the momentless state in shells by reinforcement," Dokl. Akad. Nauk SSSR, 196, No. 4, 797-800 (1971).
145. Yu. N. Nemish and I. Yu. Khoma, "Stress-strain state of nonthin shells and plates. Generalized theory (survey)," Prikl. Mekh., 29, No. 11, 3-34 (1993).
146. B. V. Nerubailo, Local Problems of the Strength of Cylindrical Shells [in Russian], Mashinostroenie, Moscow (1983).
147. U. K. Nigul, "Asymptotic theory of the static and dynamics of circular cylindrical shells and analysis of the accuracy of variants of the Kirchhoff-Love theory," in: Theory of Plates and Shells. Izd. AN Arm. SSR, Erevan (1964), pp. 738-742.
148. V. V. Novozhilov, "Brief overview of the development of the theory of shells in the USSR," Issled. Teor. Plastin. Obolochek, No. 6/7, 5-22 (1970).
149. V. V. Novozhilov, "Two approaches to the development of the theory of deformation of polycrystals. Two articles on mathematical models in continuum mechanics," Preprint. AN SSSR. In-t Probl. Mekhaniki, No. 215, 29-56 (1983).
150. V. V. Novozhilov and R. M. Finkel'shtein, "Errors of the Kirchhoff hypothesis in the theory of shells," Prikl. Mat. Mekh., 7, No. 5, 331-340 (1943).
151. I. F. Obraztsov, V. V. Vasil'ev, and V. A. Bunakov, Optimum Reinforcement of Shells of Revolution Made of Composites [in Russian], Mashinostroenie, Moscow (1977).
152. O. M. Palii and V. E. Sprio, Anisotropic Shells in Shipbuilding [in Russian], Sudostroenie, Leningrad (1977).
153. V. D. Panin and Yu. A. Gladkov, Structures with a Filler: Handbook [in Russian], Mashinostroenie, Moscow (1991).
154. N. D. Pankratova, "Study of the stress - strain state of cylindrical shells on the basis of the equations of the theory of elasticity," Prikl. Mekh., 19, No. 12, 72-77 (1983).
155. N. D. Pankratova, A. O. Rasskazov, A. O. Bondar', and A. G. Bondarskii, "Calculation of the thermal stress state of multilayered shells and plates compliant in transverse shear," Prikl. Mekh., 23, No. 7, 55-61 (1987).
156. B. L. Pelekh, Theory of Shells with a Finite Shear Stiffness [in Russian], Nauk. Dumka, Kiev (1973).
157. B. L. Pelekh, "Certain aspects of the development of the theory and methods of design of anisotropic shells and plates with a finite shear stiffness," Mekh. Polim., No. 2, 269-284 (1975).
158. V. V. Pikul', Theory and Design of Shells of Revolution [in Russian], Nauka, Moscow (1983).
159. Ya. S. Podstrigach, Collected Works [in Ukrainian], Nauk. Dumka, Kiev (1995).
160. V. G. Piskunov, V. S. Sipetov, and A. M. Yunusov, "Comparison of two solutions of the problem of the bending of multilayered plates," Sopr. Mater. Teor. Sooruzh., 37, 48-49 (1980).
161. A. V. Plekhanov, "Design of laminated shallow shells with allowance for edge effects," Prikl. Mekh., 30, No. 8, 75-80 (1994).
162. Ya. S. Podstrigach, V. A. Lomakin, and Yu. Ya. Kolyano, Thermoelasticity of Bodies of Nonuniform Structure [in Russian], Nauka, Moscow (1984).
163. A. P. Ponomarev, V. V. Merzlyakov, and A. B. Mitkevich, "Winding of shells of revolution with tape reinforced in two directions," Mekh. Komp. Mater., No. 4, 746-748 (1988).
164. V. V. Ponyatovskii, "Toward a theory of the bending of anisotropic plates," Prikl. Mat. Mekh., 28, No. 6, 1033-1039 (1964).
165. A. P. Prusakov, "Basic equations of the bending and stability of three-layer plates with a lightweight filler," Prikl. Mat. Mekh., 15. No. 1, 27-36 (1951).
166. G. I. Pshenichkov. Theory of Thin Elastic Reticular Shells and Plates [in Russian], Nauka, Moscow (1982).
167. A. O. Rasskazov, I. I. Sokolovskaya, and N. A. Shul'ga, Theory and Design of Laminated Orthotropic Plates and Shells [in Russian], Vishcha Shk., Kiev (1986).
168. V. G. Piskunov, V. E. Berizhenko, V. K. Prisyazhnyuk, et al., Design of Nonuniform Shallow Shells and Plates by the Finite Elements Method [in Russian], Vishcha Shk., Kiev (1987).
169. V. I. Myachenkov, V. P. Mal'tsev, V. P. Maiboroda, et al., Finite-Element Design of Engineering Structures: Handbook [in Russian], Mashinostroenie, Moscow (1989).
170. E. Reissner, "Certain problems of the theory of shells," in: Elastic Shells [Russian translation], IL, Moscow (1962), pp. 7-65.
171. R. Rivlin and A. Pipkin, "Design of pressure vessels reinforced by fibers," Trans. ASME, No. 1, 123-129 (1983).
172. V. A. Rodionova, Theory of Thin Anisotropic Shells with Allowance for Transverse Shear and Compression, IL, Leningrad (1983).
173. V. A. Rodionov and N. A. Fomina, "Refined modified theory of anisotropic plates," Vestn. DGU, Ser. 1, No. 4, 71-74 (1989).
174. D. V. Rosato and K. S. Grove, Winding with Glass Fiber [Russian translation], Mashinostroenie, Moscow (1969).
175. O. F. Ryabov, Design of Spherical Shells [in Ukrainian], Bydivel'nik, Kiev (1968).
176. V. S. Sarkisyan, "Solution of the problem of the bending of anisotropic (nonorthotropic) plates," Inzh. Zh. Mekh. Tverd. Tela, No. 1, 147-150 (1966).
177. V. S. Sarkisyan, Some Problems of the Mathematical Theory of Elasticity of Anisotropic Bodies [in Russian], Erevan. Univ., Erevan (1976).
178. A. V. Sachenkov, "Certain problems of the mathematical theory of multilayered shells," in: Theory of Plates and Shells [in Russian], Izd. AN Ukr. RSR, Kiev (1962), pp. 137-140.
179. L. N. Seleznev and G. G. Portnov, "Cord winding of disks with ribbons of composites," Mekh. Polim., No. 6, 998-1001 (1977).
180. Ya. S. Sidorin, "Bending of simply supported elliptical orthotropic plates," Mekh. Polim., No. 6, 998-1001 (1977).
181. V. S. Sipetov, "Refined analysis of the behavior of laminated composite structures under thermal and mechanical loads," Mekh. Komp. Mater., No. 1, 142-149 (1989).
182. S. N. Sklepus, "Thermoelasticity of shallow laminated shells of complex form," Prikl. Mekh., 32, No. 4, 49-53 (1996).
183. Yu. V. Sokolkin and A. A. Tashkinov, Mechanics of the Deformation and Fracture of Structurally Nonuniform Bodies [in Russian], Nauka, Moscow (1984).
184. V. L. Bazhanov, I. I. Gol'denblat, V. A. Kopnov, A. L. Pospelov, and A. M. Sinyukov, Strength of Glass-Reinforced Plastics [in Russian], Mashinostroenie, Moscow (1968).
185. Yu. M. Tarnopol'skii and A. V. Roze, Features of the Design of Parts Made of Reinforced Plastics [in Russian], Zinatne, Riga (1969).
186. Yu. P. Artyukhin, K. Z. Galimov, V. I. Daragun, et al., Shell Theory with Allowance for Transverse Shear [in Russian], Izd. Kazan. Univ., Kazan' (1977).
187. G. A. Teters, "Plates and shells made of composite and polymeric materials. Survey," Mekh. Polim., No. 4, 486-492 (1977).
188. G. A. Teters and A. D. Kregers, "Multipurpose optimum design of composite structures," Mekh. Komp. Mater., No. 3, 363-376 (1996).
189. G. A. Teters, R. B. Rikards, and V. L. Narusberg, Optimization of Shells Made of Composite Laminates [in Russian], Zinatne, Riga (1978).
190. S. P. Timoshenko, Course in the Theory of Elasticity [Russian translation], Nauk. Dumka, Kiev (1972).
191. S. P. Timoshenko and W. Woinowsky - Krieger, Plates and Shells [Russian translation], Fizmatgiz, Moscow (1963).
192. V. T. Tomashevskii, V. N. Kalinin, and V. S. Yakovlev, "Optimization of composite shells of revolution reinforced by a mixed system of ribs," Mekh. Komp. Mater., No. 6, 1054-1059 (1989).
193. M Hauer, "Mechanics of plates made of asymmetric composite laminates," in: Applied Mechanics of Composites [Russian translation], Mir, Moscow (1989), pp. 143-175.
194. R. Harting, "Pressure vessels obtained by the planar winding of fibers," AIAA J., 1, No. 12, 159-160 (1963).
195. I. Yu. Khoma, Generalized Theory of Anisotropic Shells [in Russian], Nauk. Dumka, Kiev (1986).
196. L. P. Khoroshun, S. V. Kozlov, Yu. A. Ivanov, and I. K. Koshevoi, Generalized Theory of Plates and Shells Nonuniform through Their Thickness [in Russian], Nauk. Dumka, Kiev (1988).
197. L. P. Khoroshun and S. G. Shpakova, "Study of a heat-sensitive cylindrical shell on the basis of shear theory," Prikl. Mekh., 22, No. 1, 59-66 (1986).
198. M. M. Khebin, Survey of the Current Status of Research into Three-Layer Structures: Mechanics [Russian translation]. Mir, Moscow (1966), No. 2(96), pp. 119-130.
199. Ya. M. Grigorenko, E. I. Bespalova, A. T. Vasilenko, G. P. Golub, G. K. Sudavtsova, and A. I. Shinkar', Numerical Solution of Boundary-Value Problems on the Statics of Orthotropic Laminated Shells of Revolution on an M-220 Computer [in Russian] (1971).
200. Ya. M. Grigorenko, A. T. Vasilenko, E. I. Bespalova, N. D. Pankratova, T. I. Polishchuk, and I. F. Latsinnik, Numerical Solution of Boundary-Value Problems on the Statics of Orthotropic Shells with Variable Parameters [in Russian], Nauk. Dumka, Kiev (1975).
201. S. B. Cherevatskii, "Arbitrary fiber-reinforced shells of revolution loaded by pressure," in: Strength and Dynamics of Aircraft Engines [in Russian], Mashinostroenie, Moscow (1966), No. 4, pp. 20-30.
202. V. S. Chuvikovskii, O. M. Palii, and V. E. Spiro, Shells for Ship Structures [in Russian], Sudostroenie, Leningrad (1966).
203. L. A. Shapovalov, "Representation of equations of the linear theory of shells with allowance for transverse shear," Tr. XVI International Conference on the Theory of Plates and Shells, Izd. Nizhegor. Univ., Nizhnii Novgorod (1994), Vol. 2, pp. 26-41.
204. V. I. Shvabyuk, "Variant of a generalized theory of transversely isotropic slabs," Prikl. Mekh., 10, No. 1, 87-92 (1974).
205. K. Stamm and H. Witte, Multilayered Shells [Russian translation], Stroizdat, Moscow (1983).
206. S. A. Ambartsumian, "One general theory of anisotropic shells and plates," Appl. Mech. Rev., 15, 146-158 (1962).
207. C. W. Bert and P. Y. Francis, "Composite materials mechanics: structural mechanics," AIAA J., 12, No. 9, 205-217 (1974).
208. A. Blinovski, "On the stress distribution in strongly anisotropic plates," Arch. Mech., 41, No. 1, 37-59 (1989).
209. D. Briassoulis, "Machine locking of degenerated thin elements," Int. J. Num. Meth. Eng., 26, No. 8, 1749-1768 (1988).
210. J. G. Chakravorty and P. K. Chaudhuri, "Bending of a symmetrically loaded nonhomogeneous circular plate under uniform compression," Rev. Roum. Sci. Techn. Ser. Mech. Appl., 30, No. 4, 425-437 (1985).
211. R. K. Chaudhuri and S. Dutta, "Bending of a symmetrically loaded circular plate of nonhomogeneous material," J. Math. Phys. Sci., 21, No. 1, 81-92 (1987).
212. G. A. Cohen, "Computer analysis of asymmetrical deformation of orthotropic shells of revolution," AIAA J., 2, No. 5, 932-934 (1964).
213. R. L. Daugherty and J. R. Vinson, "Asymptotic solution for noncircular cylinders of pyrolytic graphite," Dev. Mech., 568-576 (1969).
214. R. G. Dong and S. B. Dong, "Analysis of slightly anisotropic shells," AIAA J., 1, No. 11, 2565-2569 (1963).
215. S. B. Dong, K. S. Pister, and R. L. Taylor, "On the theory of laminated anisotropic shells and plates," J. Aerospace Sci., 29, No. 8, 969-975 (1962).
216. H. Fukunada, "On isotropic laminate configurations," J. Compos. Mater., 24, No. 5, 519-536 (1990).
217. K. Girkmann and R. Beer, "Anwendung der verschafter Plattentheorie nack E. Reissner auf ortotrope Platten," Oster. Jng. Archiv., 12, No. 1-2, 101-110 (1958).
218. L. M. Habip, "A review of recent work on multilayered structures," Int. J. Mech. Sci., No. 7, 584-593 (1965).
219. R. K. Jawager, K. S. Nagaraja, and K. Viiavakumar, "New approach for the analysis of flexure of symmetrical laminates," AIAA J., 29, No. 11, 1960-1966 (1991).
220. G. Jemlelita, "On kinematical assumptions of refined theories of plates: A survey," Trans. ASME J. Appl. Mech., 57, No. 4, 1080-1091 (1990).
221. P. E. Jordan and P. E. Shelley, "Stabilization of unstable two-point boundary-value problems," AIAA J., 4, No. 5, 923-924 (1966).
222. J. P. Juesettte, G. Laschet, P. Charpentier, and P. Deloo, "Finite element analysis of composite revolution structures wound by wide plies," Compos. Struct., 8, No. 3, 221-237 (1987).
223. A. Kalnins, "Analysis of shells of revolution subjected to symmetrical and nonsymmetrical loads," ASME Trans., 31, No. 3, 467-476 (1964).
224. I. M. Klosner and H. S. Levine, "Further comparison of elasticity and shell theory solution," Journ., 4, No. 3, 467-480 (1966).
225. Z. Li, "The general solution for axial symmetrical bending of nonhomogeneous circular plates resting on an elastic foundation," Appl. Mat. Mech., 12, No. 9, 813-820 (1991).
226. L. P. Liang, "A series boundary integration method for the bending analysis of anisotropic plates," Appl. Mat. Mech., 11, No. 8, 743-750 (1990).
227. L. Librescu, Statica si Dinamica Structurilor Elastice Anisotrope si Eterogene, Editura Academici Republicii Socialiste Ramania, Bucharest (1969).
228. L. Librescu and R. Schmidt, "Substantiation of a shear deformable theory of anisotropic composite laminated shells accounting for the interlaminar continuity conditions," Int. J. Eng. Sci., 29, No. 6, 669-683 (1991).
229. K. H. Lo, R. M. Christensen, and E. M. Wu, "A high-order theory of plate deformation. Part 2. Laminated plates," Trans. ASME J. Appl. Mech., 74, No. 4, 663-668 (1977).
230. E. H. Mansfield, "Analysis of unbalanced multilayered elliptical plates under linearly varying pressure," Int. J. Mech. Sci., 32, No. 5, 417-422 (1990).
231. A. P. Misovec and J. Kempner, "Approximate elasticity for orthotropic cylinder under hydrostatic pressure and band loads," Trans. ASME Ser. E, 37, No. 1, 106-113 (1970).
232. M. Mitsunori and S. Yohihiko, "Optimum design of laminated composite plates using lamination parameters," AIAA J., 31, No. 5, 921-922 (1993).
233. A. K. Noor and W. S. Burton, "Assessment of computational models for multilayered composite shells," Appl. Mech. Rev., 43, No. 4, 67-97 (1990).
234. A. K. Noor, W. S. Burton, and J. M. Peters, "Assessment of computational models for multilayered composite cylinders," Int. J. Solids Struct., 27, No. 10, 1269-1286 (1991).
235. A. K. Noor and W. S. Burton, "Computational model for high-temperature multilayered composite plates and shells," Appl. Mech. Rev., 45, No. 10, 419-446 (1992).
236. Y. Ohasi, "Bending of thin elliptic plate on orthotropic material under uniform lateral load," ZAMP, 3, No. 3, 212-224 (1952).
237. J. N. Reddy, "On refined theories of composite laminates," Meccanica, 25, No. 4, 230-238 (1990).
238. J. N. Reddy and C. F. Lin, "High-order shear deformation theory of laminated elastic shells," Int. J. Eng. Sci., 23, No. 3, 319-330 (1985).
239. E. Reissner, "On the theory of bending of elastic plates," J. Math. Phys., 23, No. 2, 184-191 (1944).
240. W. K. Sepetoski, C. E. Pearson, J. W. Dingwell, and A. W. Adkins, "A digital computer program for the general axially symmetric thinshell problem," Trans. ASME, 29, No. 4, 655-661 (1962).
241. S. Srinivas and A. K. Rao, "Bending, vibration, and buckling of simple thick orthotropic rectangular plates and laminated plates," Int. J. Solids Struct., 6, No. 11, 1463-1481 (1970).
242. L. X. Sun and T. R. Hsu, "Thermal stress analysis of laminated composite solids of axisymmetric geometry," AIAA J., 28, No. 8, 1527-1529 (1990).
243. J. Q. Tarn and C. B. Yen, "A three-dimensional asymptotic analysis of anisotropic inhomogeneous and laminated cylindrical shells," Acta Mech., 113, No. 1-4, 137-153 (1995).
244. A. S. Tooth, W. M. Banks, and D. M. Rahman, "The specially orthotropic GRP multi-layered cylindrical shell: A theoretical approach for the general loading case," Compos. Struct., 9, No. 1, 53-68 (1988).
245. R. R. Valisetty and L. W. Rehfield, "A theory for stress analysis of composite laminates," AIAA J., 23, No. 7, 1111-1117 (1985).
246. E. Volterra, "Effect of deformation on the bending of rectangular plates," Trans. ASME, No. 3, 241-243 (1960).
247. J. T. Wang and T. M. Su, "Discrete analysis of stiffened composite cylindrical shells," AIAA J., 23, No. 4, 1753-1761 (1985).
248. Weng Tu-Lung, "Thermal stresses in anisotropic hollow cylinders," Trans. ASME Ser. D, 87, No. 2, 391-396 (1965).
249. J. M. Whitney and C. T. Sun, "A higher order theory for extensional motion of laminated anisotropic cylindrical shells," J. Sound. Vib., 30, No. 1, 85-91 (1973).
250. J.-X. Zeng and Ye-I. Fan, "A new higher-order theory for laminated plates and shells," Appl. Mat. Mech., No. 1, 23-32 (1990).