Un critère de rupture multiaxial pour matériaux fragiles

Canadian Journal of Civil Engineering

Volumn 25, Issue 2, 1998, Pages 277-290

  Aubertin, Michel ^a   Simon, Richard ^a  

^a ÉCOLE POLYTECHNIQUE DE MONTRÉAL   (Canada)

Author keywords

Brittle materials; Cast iron; Concrete; Failure; Rock

Indexed keywords

BRITTLE FRACTURE; CAST IRON; CONCRETES; FAILURE ANALYSIS; PARAMETER ESTIMATION; ROCKS; STRESS ANALYSIS;

BRITTLE MATERIALS;

FAILURE (MECHANICAL);

EID: 0032041354     PISSN: 03151468     EISSN: None     Source Type: Journal    
DOI: 10.1139/l97-092     Document Type: Article

References (76)

1. Adams, M., et Sines, G. 1978. Crack extension from flaws in a brittle material subjected to compression. Tectonophysics, 49 : 97-118.
2. Akai, K., et Mori, H. 1970. Ein versuch über bruchmecanismus von sandstein unter mehrachsigen spannungszustand. Proceedings of the 2nd International Congress on Rock Mechanics, Belgrade. Vol. 2, pp. 207-213.
3. Amadei, B., et Robinson, M.J. 1986. Strenght of rocks in multiaxial loading conditions. Proceedings of the 27th U.S. Symposium on Rock Mechanics, Tuscaloosa, Ala., pp. 47-55.
4. Andreev, G.E. 1995. Brittle failure of rock materials. Test results and constitutive models. Balkema, Rotterdam.
5. Aplin, P.F., et Eggeler, G.F. 1989. Multiaxial stress rupture criteria for ferritic steels. Mechanics of Creep Brittle Material, Proceedings of the European Mechanics Colloquium 239. Éditeurs : A.C.F. Cocks et A.R.S. Ponter. Elsevier Applied Science, London, pp. 245-261.
6. Ashby, M.F., et Sammis, C.G. 1990. The damage of brittle solids in compression. Pageoph, 113(3) : 489-521.
7. Aubertin, M., et Simon, R. 1997. A damage initiation criterion for low porosity rocks. International Journal Rock Mechanics & Mining Sciences, 34 : 3-4, Paper No. 017 (10 pages sur CD ROM, Elsevier Science Ltd.).
8. Aubertin, M., Gill, D.E., et Ladanyi, B. 1994. Constitutive equations with internal state variables for the inelastic behavior of soft rocks. Applied Mechanics Review, ASME, 47(6-2) : S97-S101.
9. Barton, N., et Choobey, V. 1977. The shear strength of rock joints in theory and practice. Rock Mechanics, 10(1) : 1-54.
10. Bieniawski, Z.T. 1974. Estimating the strength of rock materials. Journal of South African Institute of Mining and Metallurgy, March, pp. 312-320.
11. Biret, F., Valentin, G., Gordo, B., et Henri, J.P. 1989. Influence de la pression sur la ténacité des roches. Rock at great depth. Balkema, Rotterdam, pp. 165-170.
12. Brace, W.F., et Bombolakis, E.G. 1963. A note on brittle crack growth in compression. Journal of Geophysical Research, 68 : 3709-3713.
13. Brestler, B., et Pister, K.S. 1958. Strength of concrete under combined stresses. AGI Journal, 55 : 321-345.
14. Byerlee, J.D. 1968. Brittle-ductile transition in rocks. Journal of Geophysical Research, 73 : 4741-4750.
15. Carter, B.J., Scott Duncan, E.J., et Laitai, E.Z. 1991. Fitting strength criteria to intact rock. Geotechnical and Geological Engineering, 9:73-81.
16. Charlez, P.A. 1991. Rock mechanics. Vol. 1. Theoritical fundamentals. Éditions Technics, Paris.
17. Charmichael, R.S. 1982. Handbook of physical properties of rocks. Vol. II. CRC Press, Boca Raton, Fla.
18. Chen, A.C.T., et Chen, W.F. 1975. Constitutive relations for concrete. ASCE Journal of the Engineering Mechanics Division, 101 : 465-481.
19. Chen, W.F., et Han, D.J. 1988. Plasticity for structural engineers. Springer-Verlag, New York.
20. Coffin, L.F., et Schenectady, N.Y. 1950. The flow and fracture of a brittle material. Journal of Applied Mechanics, 17 : 223-248.
21. Desai, C.S., et Salami, M.R. 1987. Constitutive model for rocks. ASCE Journal of Geotechnical Engineering, 113 : 407-423.
22. Desai, C.S., et Siriwardare, H.J. 1984. Constitutive laws for engineering materials with emphasis on geologic materials. Prentice-Hall Inc. Englewood Cliffs, N.J.
23. Drucker, D.C., et Prager, W. 1952. Soil mechanics and plastic analysis on limit design. Quaterly of Applied Mathematics, 10(2) : 157-165.
24. Dungar, R. 1987. A viscoplastic bounding surface model for concrete under compressive and tensile conditions and its application to arch dam analysis. Constitutive laws for engineering materials: theory and applications. Elsevier Science Publishing, New York. pp. 849-856.
25. Fairhurst, C. 1964. On the validity of the Brazilian test for brittle materials. International Journal of Rock Mechanics, 1 : 535-546.
26. Freire, J.C.F., et Riley, R.F. 1980. Yield behavior of photoplastic materials. Experimental Mechanics, 20 : 118-125.
27. Germanovitch, L.N., Carter, B.J., Ingraffea, A.R., Dyskin, A.V., et Lee, K.K. 1996. Mechanics of 3-D crack growth under compressive loads. Rock Mechanics, Tools and Techniques. Proceedings of the 2nd North American Rock Mechanics Symposium. Éditeurs : M. Aubertin, F. Hassani et H. Mitri. Balkema, Rotterdam, pp. 1151-1160.
28. e éd. John Wiley & Sons, New York.
29. Grassi, R.C., et Cornet, I. 1949. Fracture of grey-cast-iron tubes under biaxial stresses. Journal of Applied Mechanics, ASME (June), 71 : 178-182.
30. Griffith, A.A. 1921. The phenomena of rupture and flow in solids. Philosophical Transactions of the Royal Society of London, 221 A: 163-198.
31. Griffith, A.A. 1924. The theory of rupture. Proceedings of the First International Congress Applied Mechanics. Delft. Partie l. pp. 55-63.
32. Hjelm, H.E. 1994. Yield surface for grey cast iron under biaxial stress. Journal of Engineering Materials & Technology, ASME, 116: 148-154.
33. Hoek, E., et Brown, E.T. 1980. Empirical strength criterion for rock masses. ASCE Journal of the Geotechical Engineering Division, 106: 1013-1035.
34. Horii, H., et Nemat-Nasser, S. 1986. Brittle failure in compression: splitting, faulting and brittle-ductile transitions. Philosophical Transactions of the Royal Society of London, A319 : 337-374.
35. Hsieh, S.S., Ting, E.C., et Chen, W.F. 1982. A plasticity-fracture model for concrete. International Journal of Solids and Structures, 18(3): 181-197.
36. Humpheson, C., et Naylor, D.J. 1976. The importance of the form of the failure criterion. Numerical Methods in Soil Mechanics and Rock Mechanics. Éditeurs : G. Born et H. Meissner. University of Karlsruhe, pp. 17-30.
37. Hunsche, U. 1994. Uniaxial and triaxial creep and failure tests on rock: experimental technique and interpretation. Visco-plastic behaviour of geomaterials. CISM Courses and Lectures No. 350. Éditeurs : N.D. Cristescu et G. Gioda. Springer-Verlag, Wien. pp. 1-54.
38. Johnston, I.W. 1985. Comparison of two strength criteria for intact rock. ASCE Journal Geotechnical Engineering, 111 : 1449-1454.
39. Kim, M.K., et Lade, D.V. 1984. Modeling rock strength in three dimensions. International Journal of Rock Mechanics, Mining Sciences and Geomechnical Abstracts, 21 : 21-33.
40. Kim, C.H., et Yeh, H.Y. 1994. Development of a new yielding criterion: the Yeh-Stratton criterion. Engineering Fracture Mechanics, 47 : 569-582.
41. Kwasniawski, M. 1989. Laws of brittle failure and of B-D transition in sandstones. Rock at great depth. Éditeurs : V. Maury et D. Fourmaintraux. Balkema, Rotterdam, pp. 45-58.
42. Ladanyi, B., et Archambault, G. 1970. Simulation of shear behavior of a jointed rock mass. Proceedings of the 11th U.S. Symposium on Rock Mechanics, University of California, Berkeley, Calif. pp. 105-125.
43. Lade, P.V. 1982. Three parameter failure criterion for concrete. ASCE Journal of Engineering Mechanics, 108 : 850-863.
44. Lade, P.V. 1993. Rock strength criteria. The theories and evidence. Comprehensive rock engineering - principles, practice and projects. Éditeur: J.A. Hudson. Pergamon Press, Oxford. Vol. 1. pp. 255-284.
45. Lee, J.H. 1988. Some exact and approximate solutions for the modified von Mises criterion. Journal of Applied Mechanics, 55 : 260-266.
46. Lee, J.H. 1989. Characterization of strain hardening for a simple pressure-sensitive plasticity model. Acta Mechanica, 77 : 133-151.
47. Li, C., et Nordlund, E. 1993. Deformation of brittle rocks under compression - with particular reference to microcracks. Mechanics of Materials, 15 : 223-239.
48. Lubliner, J. 1990. Plasticity theory. McMillan Publishing, New York.
49. Maso, J.C., et Lereau, J. 1980. Mechanical behavior of Darney sandstone in biaxial compression. International Journal of Rock Mechanics, Mining Sciences and Geomechanical Abstracts, 17 : 109-115.
50. McClintok, F.A., et Walsh, J.B. 1962. Friction on Griffith cracks under pressure. Proceedings of the 4th U.S. National Congress on Applied Mechanics, Berkeley, Calif. pp. 1015-1021.
51. Meredith, P.G. 1990. Fracture and failure of brittle polycrystals: an overview. Deformation processes in minerals, ceramics and rocks. Éditeurs : D.J. Barber et P.G. Meredith. Unwyn Hyman, London, pp. 5-47.
52. Mills, L.L., et Zimmerman, R.M. 1970. Compressive strength of plain concrete under multiaxial loading conditions, ACI Journal, 67 : 802-807.
53. Mogi, K. 1971. Effect of the triaxial stress system on the failure of dolomite and limestone. Tectonophysics, 11 : 111-127.
54. Murrell, S.A.F. 1990. Brittle-to-ductile transitions in polycrystalline non-metallic materials. Deformation processes in minerals, ceramics and rocks, Éditeurs : D.J. Barber et P.O. Meredith. Unwyn Hyman, London, pp. 109-137.
55. Nadai, A. 1950. Theory of flow and fracture of solids. Vol. 1. McGraw-Hill, New York.
56. Nayak, G.C., et Zienkiewicz, O.C. 1972. Convenient form of stress invariants for plasticity. Proceedings of the American Society of Civil Engineers, 98(ST4) : 949-953.
57. Oñate, E., Oller, S., Oliver, J., et Lubliner, J. 1987. A constitutive model for cracking of concrete based on the incremental theory of plasticity. Computational plasticity - models, software, and applications. Éditeurs : D.R.J. Owen, E. Hinton et E. Oñate. Pineridge Press, Swansea, United Kingdom, pp. 1311-1329.
58. Ottosen, N.S. 1977. A failure criterion for concrete. ASCE Journal of Engineering Mechanics, 103 : 527-535.
59. Papantonopoulos, C.I., et Atnatzidis, D.K. 1993. A failure criterion for natural and artificial soft rocks. Geotechnical engineering of hard soils - soft rocks. Balkema, Rotterdam, pp. 729-735.
60. Paterson, M.S. 1978. Experimental rock deformation - the brittle field. Springer-Verlag, Wien.
61. Patton, F.D. 1966. Multiple modes of shear failure in rock joints in theory and practice. Proceedings of the 1st Congress of the International Society of Rock Mechanics, Lisboa. Vol. 1. pp. 521-529.
62. Raghava, R.S., et Caddell, R.M. 1973. A macroscopic yield criterion for crystalline polymers. International Journal of Mechanical Science, 15 : 967-974.
63. Ramamurthy, T., Rao, G.V., et Rao., K.S. 1985. A strength criterion form rocks. Proceedings of the Indian Geotechnical Conference, Roorhee. Vol. 1, pp. 59-64.
64. Schwartz, A.E. 1964. Failure of rock in the triaxial test. Proceedings of the 6th U.S. Symposium on Rock Mechanics, Rolla, Miss, pp. 109-151.
65. e éd. CRC Press, Boca Raton, Fla.
66. Singh, J., Ramamurthy, T., et Rao, G.V. 1989. Strenght of rocks at great depth. Rock at great depth. Éditeurs : V. Maury et D. Fourmaintraux. Balkema, Rotterdam, pp. 37-44.
67. Skrzypek, J.J., et Hetnarski, R.P. 1993. Plasticity and creep - theory, examples, and problems. CRC Press, Boca Raton, Fla.
68. Smith, J.L., DeVries, K.L., Bushnell, D.J., et Brown, W.S. 1969. Fracture data and stress-strain behavior of rocks in triaxial compression. Experimental Mechanics, 9 : 348-355.
69. Stassi-d'Alia, F. 1961. Une fonction quadratique des tensions principales comme conditions de plasticité des corps solides. Bulletin RILEM, 13 : 44-55.
70. Stassi-d'Alia, F. 1967. Flow and fracture of materials according to a new limiting condition of yielding. Meccanica, 3 : 178-195.
71. Theocaris, P.S. 1995. Failure criteria for isotropic bodies revisited. Engineering Fracture Mechanics, 51(2) : 239-264.
72. Tschoegl, N.W. 1971. Failure surface in principal stress space, molecular order - molecular motion: their response to macroscopic stresses. Journal of Polymer Science, 32 : 239-267.
73. Wastiels, J. 1979. Failure criteria for concrete under multiaxial stress states. Proceedings of the Colloquium on Plasticity in Reinforced Concrete, International Association for Bridge and Structural Engineering, Lyngby. pp. 3-10.
74. Williams, K.J., et Warnke, E.P. 1974. Constitutive model for the triaxial behaviour of concrete. International Association of Bridge and Structural Engineers Seminar on Concrete Structures Subjected to Triaxial Stresses, Paper III-1. Bergamo.
75. Yamaguchi, E., et Chen, W.F. 1987. On micro-mechanics of fracture and constitutive modeling of concrete materials. Constitutive laws for engineering materials: theory and applications. Elsevier Science Publishing, New York. pp. 939-947.
76. Zachary, L.W., et Riley, W.F. 1977. Optical response and yield behavior of a polyester model material. Experimental Mechanics, 17:321-326.