High temperature mechanical and microstructural behavior of A356/15 VOL% SiCp and A356 alloy

Canadian Metallurgical Quarterly

Volumn 37, Issue 2, 1998, Pages 125-139

  Mcqueen, H J ^a   Myshlyaev, M ^b   Konopleva, E ^a   Sakaris, P ^a  

^a Dept of Electrical and Computer Engineering   (Canada)

^b BAIKOV INSTITUTE OF METALLURGY AND MATERIALS SCIENCE   (Russian Federation)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVATION ENERGY; DISLOCATIONS (CRYSTALS); DUCTILITY; HIGH TEMPERATURE EFFECTS; MECHANICAL PROPERTIES; METALLIC MATRIX COMPOSITES; METALLOGRAPHIC MICROSTRUCTURE; NUCLEATION; PLASTIC FLOW; RECRYSTALLIZATION (METALLURGY); STRAIN HARDENING; STRAIN RATE;

ARRHENIUS TERM; DECOHESION VOIDS; DYNAMIC RECOVERY; DYNAMIC RECRYSTALLIZATION; FLOW STRESSES;

SILICON ALLOYS;

EID: 0032035583     PISSN: 00084433     EISSN: None     Source Type: Journal    
DOI: 10.1179/cmq.1998.37.2.125     Document Type: Article

References (56)

1. Lloyd, D. J., High Performance Composites for the 1990s, ed. S. K. Das, C. P. Ballard and F. Marikar. TMS, Warrendale, PA, 1991, pp. 33-45.
2. Kjar, A. R., Miihelich, J. L., Srithavan, T. and Heathcock, C. J., Light Weight Alloys for Aerospace Applications, ed. E. W. Lee et al. TMS-AIME, Warrendale, PA, 1989, pp. 273-288.
3. Lloyd, D. J., Advanced Structural Materials, ed. D. S. Wilkinson. Pergamon Press, Oxford, U.K. 1989, pp. 1-21.
4. Klimowicz, F. T., JOM (TMS), 1996, 46(11), 49-53.
5. McQueen, H. J. and Sakaris, P., First Canadian International Composites Conference and Exhibition, CANCOM '91, Montreal, Canada, 1991, 3C3-1-3C3-8.
6. Bieler, T. R., Hot Workability of Steels and Light Alloys-Composites, ed. H. J. McQueen et al. Met. Soc. CIMM Montreal, 1996, pp. 113-124.
7. Humphreys, F. J., Mechanical and Physical Behaviour of Metallic and Ceramic Composites, ed. S. I. Andersen, H. Lilholt and O. B. Pedersen. RISO, Roskilde, Denmark, 1988, pp. 51-74.
8. Stanford-Beale, C. A. and Clyne, T. W., Composites Science and Technology, 1989, 35, 121-157.
9. McQueen, H. J. and Xia, X., Joint Canada-Japan Workshop on Composites, Kyoto, August 1996, Sci. Eng. Comp. Mat., 1997, 6, 185-200.
10. Harrigan Jr., W. C., Gaebler, G., Davis, E. G. and Levin, E. J., Mechanical Behaviour of Metal Matrix Composites, ed. J. E. Hack and M. F. Amateau. TMS-AIME, Warrendale, PA, 1983, pp. 169-180.
11. Rao, K. P., Doraivelu, S. M., Roshan, H. Md. and Prasad, Y. V. R. K., Metal Trans. A, 1983, 14A, pp. 1671-1679.
12. Arsenault, R. J., Wang, L. and Feng, C. R., Acta Metal., 1991, 39, 47-57.
13. Arsenault, R. J., Strength of Metals and Alloys, ICSMA9, Tel-Aviv, Vol. 2, ed. D. G. Brandon et al. Freund Pub. Co. Ltd., London, U.K., 1990, pp. 31-46.
14. Pickens, J. R., Langan, T. J., England, R. O. and Liebson, M. R., Metal. Trans. A, 1987, 18A, 303-312.
15. Xiong, Z., Geng, L. and Yao, C. K., Composites Science and Technology, 1990, 39, 117-125.
16. Tuler, F. R., Beals, J. T., Demetry, C. and Zhao, D., Cast Reinforced Metal Composites, ed. S. G. Fishman and A. K. Dhingra. ASM, Metals Park, OH, 1988, pp. 321-325.
17. Humphreys, F. J., Miller, W. S. and Djazeb, M. R., Mat. Sci. Tech., 1990, 6, 1157-1166.
18. Demetry, C., Beale, J. T. and Tuler, F. R., Advanced Structural Materials, ed. D. S. Wilkenson. Pergamon Press, Oxford, 1989, pp. 33-39.
19. Subramanian, K. N., Bieler, T. R. and Lucas, J. P., Key Engineering Materials, part 1, ed. G. M. Newaz et al. Trans. Tech Pub. Ltd. 104-107, 1995, 175-213.
20. Juul Jensen, D., Liu, Y. L., Hansen, N., Metal Matrix Composites - Processing, Microstructures and Properties, ed. N. Hansen et al. Riso Natl. Lab., Roskilde, 1991, pp. 417-422.
21. Liu, Y. L., Scripta Mat., 1996, 35, 253-259.
22. Yu, D. and Chandra, T., Advanced Composites '93, Wollongong, ed. T. Chandra et al. TMS-AIME, Warrendale, PA, 1993, pp. 1073-1077.
23. Sakaris, P. and McQueen, H. J., Advance in Production and Fabrication of Light Metals, ed. M. M. Avedesian et al. Met. Soc., CIMM Montreal, 1992, pp. 605-617.
24. McQueen, H. J., Sakaris, P. and Bowles, J., Advanced Composites '93, ed. T. Chandra, A. K. Dhingra. TMS-AIME, Warrendale, PA, 1992, pp. 1193-1198.
25. McQueen, H. J., Konopleva, E. and Myshlyaev, M., Strength of Materials (ICSMA/10, Sendai), ed. H. Oikawa et al. Japan Inst. Metals, 1994, pp. 773-776.
26. Myshlyaev, M. M., Konopleva, E. and McQueen, H. J., Mat. Sci. Tech., 1997 (in press).
27. Xia, X., Sakaris, P. and McQueen, H. J., Developments and Applications of New Ceramic and Metal Alloys, ed. R. A. L. Drew and H. Mostaghed. Met. Soc. - CIMM, Montreal, 1993, pp. 495-510.
28. Xia, X., Sakaris, P. and McQueen, H. J., Recent Developments in Light Metals, Met. Soc. CIMM, Montreal, 1994, pp. 123-134.
29. Xia, X. and McQueen, H. J., Microstructural Science, (Intnl. Met. Soc. Conf., Montreal, 1994, 1995, 22, 297-314.
30. Xia, X., Sakaris, P. and McQueen, H. J., Mat. Sci. Tech., 1994, 10, 487-494.
31. Xia, X., McQueen, H. J. and Sakaris, P., Scripta Metal. Mat., 1995, 32, 1185-1190.
32. Xia, X., Zhao, J. and McQueen, H. J., Joint Canada-Japan Workshop on Composites, Kyoto, August 1996. Sci. Eng. Comp. Mat., 1996, 5, 215-234.
33. McQueen, H. J., Xia, X., Konopleva, E. V., Sakaris, P. and Qin, Q., Al Alloys, Physical and Mechanical Properties, (ICAA/4, Atlanta), Vol. 2, ed. T. Sanders and E. A. Starke. Georgia Inst. Tech., Atlanta, 1994, pp. 645-652.
34. McQueen, H. J., Konopleva, E. V., Myshlyaev, M. and Qin, Q., Proc. Tenth International Conf. on Composite Materials, ICCM-10 (Whistler, B. C.) Vol II, ed. A. Poursartip and D. Street. Woodhead Pub., Abington, 1995, pp. 519-530.
35. McQueen, H. J., Konopleva, E. V. and Avramovic-Cingara, G., Proc. 11th Intnl. Conf. Composite Materials, Vol. III, ed. M. L. Scott, et al. Australian Comp. Struc. Soc., Melbourne, 1997, pp. 418-428.
36. McQueen, H. J. and Xia, X., Recrystallization and Related Topics (Proc. 3rd Intnl. Conf., ReX '96). ed. T. R. McNelley, Monterey Inst. Advanced Studies, CA, 1997, pp. 603-610.
37. De Sanctis, A. M., Evangelista, E., Forcellese, A., Wang, Y. Z., Appl. Comp. Mat., 1996, 3, 179-198.
38. De Sanctis, A. M., Evangelista, E., Forcellese, A., Key Eng. Mat., 1997, 127-131, 525-532.
39. McQueen, H. J., Hot Deformation of Aluminum Alloys, ed. T. G. Langdon and H. D. Merchant. Warrendale, PA: TMS-AIME, 1991, 31-54, 105-120.
40. Humphreys, F. J. and Kalu, P. N., Acta Metal., 1987, 35, 2815-2829.
41. Pilling, J., Scripta Metal, 1989, 23, 1375-1380.
42. Mahoney, M. W. and Ghosh, A. K., Metal. Trans. A, 1987, 20A, 2409-2417.
43. Xia, X., Herba, E. and McQueen, H. J., Hot Workability of Steels and Light Alloys-Composites, ed. H. J. McQueen, E. V. Konopleva and N. D. Ryan. Met. Soc. CIM, Montreal, 1996, pp. 125-133.
44. Boyer, H. E. and Gall, T. L., ed. ASM Metals Handbook, Desk Edition, ASM, Metals Park, OH, 1985, pp. 6.1-6.48.
45. Fulop, S., Cadien, K., Luton, M. J. and McQueen, H. J., J. Test. Evaluation, 1977, 5, 419-426.
46. McQueen, H. J., Evangelista, E. and Ryan, N. D., Recrystallization '90 (Intnl. Conf. Recrystallization in Metallic Materials, ed. T. Chandra. TMS-AIME, Warrendale, PA, 1990, pp. 89-100.
47. McQueen, H. J., Evangelista, E. and Kassner, M. E., Z. Metalkde, 1991, 82, 336-345.
48. McQueen, H. J. and Ryum, N., Scand. J. Met., 1985, 14, 183-194.
49. McQueen, H. J., Avramovic-Cingara, G., Conrad, K. and Szkrumelak, I., Microstructural Sci., 1989, 17, 375-392.
50. McQueen, H. J., Conrod, K. and Avramovic-Cingara, G., Can. Metal. Q., 1993, 32, 375-386.
51. Evangelista, E., Ryan, N. D. and McQueen, H. J., Metal. Sci. Tech., 1991, 9, 75-92.
52. Avramovic-Cingara, G., Aust, K. T., Perovic, D. D., Palumbo, G. and McQueen, H. J., Can. Metal. Quart., 1995, 34, 265-273.
53. Barrett, C. S. and Levenson, L. H., Trans. AIME, 1990, 137, 112-127.
54. Doherty, R. D., Microstructural and Crystallographic Aspects of Recrystallization, ed. N. Hansen et al. Riso Natl. Lab, Roskilde, DK 1995, pp. 1-23.
55. Hughes, D. A., Al Alloys for Packaging II, ed. J. Morris et al. TMS-AIME, Warrendale, PA, 1996, pp. 129-144.
56. Bay, B., Hansen, N., Hughes, D. A. and Kuhlman-Wilsdorf, D., Acta Metal Mat., 1992, 40, 205-219.