Modeling effects of dislocation substructure in polycrystal elastoviscoplasticity

Mechanics of Materials

Volumn 27, Issue 3, 1998, Pages 145-163

  Horstemeyer, Mark F ^a   McDowell, David L ^b  

^a SANDIA NATIONAL LABORATORIES   (United States)

^b GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Anisotropy; Cell blocks; Dislocation substructure; Elastoviscoplasticity; Geometric necessary boundaries; Kinematic hardening

Indexed keywords

ANISOTROPY; CRYSTAL MICROSTRUCTURE; DISLOCATIONS (CRYSTALS); ELASTIC MODULI; ELASTOPLASTICITY; GRAIN SIZE AND SHAPE; HARDENING; SINGLE CRYSTALS; TENSORS; VISCOPLASTICITY;

KINEMATIC HARDENING; POLYCRYSTAL ELASTOVISCOPLASTICITY; SUBGRAIN SCALE DISLOCATION SUBSTRUCTURE;

POLYCRYSTALLINE MATERIALS;

EID: 0032028867     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0167-6636(97)00037-9     Document Type: Article

References (76)

1. Ananthan, V.S., Leffers, R., Hansen, N., 1991. Cell and band structures in cold-rolled polycrystalline copper. Mater. Sci. Technol. 7, 1069-1075.
2. Asaro, R.J., 1983. Crystal plasticity. J. Appl. Mech. 50, 921-934.
3. Asaro, R.J., Needleman, A., 1985. Texture development and strain hardening in rate dependent polycrystals. Acta Metall. 33 (6), 923-953.
4. Ashby, M., 1970. Phil. Mag. 21, 399.
5. Ashby, M., 1971. In: Kelly, A., Nicholson, R.B. (Eds.), Strengthening Methods in Crystals, p. 137.
6. Backofen, W.A., 1950. The torsion texture of copper. Trans. AIME 188, 1454.
7. Bassani, J.L., Wu, T.Y., 1991. Latent hardening in single crystals II. Analytical characterization and predictions. Proc. R. Soc. Lond. A 435, 21-41.
8. Bassim, M.N., Kuhlmann-Wilsdorf, D., 1973. Computer studies of dislocation networks and cells. Cryst. Latt. Defects 4, 9-27.
9. Bassim, M.N., Liu, C.D., 1993. Dislocation cell structures in copper in torsion and tension. Mater. Sci. Eng. A 164, 170-174.
10. Bate, P., Roberts, W.T., Wilson, D.V., 1981. The plastic ani-sotropy of two-phase aluminum alloys - I. Anisotropy in unidirectional deformation. Acta Metall. 29, 1797-1814.
11. Bay, B., Hansen, N., Kuhlmann-Wilsdorf, D., 1989. Deformation structures in lightly rolled pure aluminum. Mater. Sci. Eng. A113, 385-397.
12. Berveiller, M., Zaoui, A., 1979. An extension of the self-consistent scheme to plastically flowing crystals. J. Mech. Phys. Solids 26, 325-344.
13. Bishop, J.F.W., Hill, R., 1951. A theoretical derivation of the plastic properties of a polycrystalline face-centered metal. Phil. Mater. Ser. 7 (42), 1298-1307.
14. Budiansky, B., Wu, T.Y., 1962. Theoretical prediction of plastic strains of polycrystals. In: Proc. 4th US Natl. Congress Applied Mech., p. 1175.
15. Canova, G.R., Kocks, U.F., Jonas, J.J., 1984. Theory of torsion texture development. Acta Metall. 32 (2), 211-226.
16. Chang, Y.J., Shume, A.J., Bassim, M.N., 1988. A note on dislocation cell structures in commercial copper. Mater. Sci. Eng. A 103, L1-L4.
17. Cuitino, A.M., Ortiz, M., 1992. Computational modeling of single crystals. Modelling Sim. Mater. Sci. Eng. 1, 225-263.
18. Dautzenberg, J.H., Zaat, J.H., 1973. Quantitative determination of deformation by sliding wear. Wear 23, 9-19.
19. Dawson, P.R., 1987. On modeling of mechanical property changes during flat rolling of aluminum. Int. J. Solids Struct. 23 (7), 947-968.
20. Eshelby, J., 1957. The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc. R. Soc. Lond. A 241, 376-396.
21. Hansen, N., 1990. Cold deformation microstructures. Mater. Sci. Technol. 6, 1039-1047.
22. Hansen, N., Jensen, J.D., 1991. Microscopic and crystallographic aspects of flow stress anisotropy, in anisotropy and localization of plastic deformation. In: Boehler, J.P., Khan, A.S. (Eds.), Proc. of 3rd Symposium on Plasticity and its Current Applications, pp. 131-134.
23. Hansen, N., Hughes, D.A., 1995. Analysis of large dislocation populations in deformed metals. Phys. Stat. Solidi B 149, 155-172.
24. Harren, S., Lowe, T.C., Asaro, R.J., Needleman, A., 1989. Analysis of large strain shear in rate-dependent face-centered cubic polycrystals: Correlation of micro- and macromechanics. Phil. Trans. R. Soc. Lond. A 238, 443-500.
25. Hill, R., 1948. A theory of the yielding and plastic flow of anisotropic metals. Proc. R. Soc. A 193, 281-297.
26. Hill, R., 1965. Continuum micromechanics of elastoplastic polycrystals. J. Mech. Phys. Solids 13, 89-101.
27. Hill, R., Rice, J.R., 1972. Constitutive analysis of elastic-plastic crystals at arbitrary strain. J. Mech. Phys. Solids 20, 401-413.
28. Honneff, W.G., Mecking, H., 1978. A Method for the Determination of the Active Slip Systems and Orientation Changes during Single Crystal Deformation. In: Gottstein, G., Lucke, K. (Eds.), Texture of Materials. Springer-Verlag, Berlin, pp. 265-275.
29. Horstemeyer, M.F., 1995. Physically-motivated modelling of deformation-induced anisotropy. Ph.D. thesis, Georgia Institute of Technology.
30. Horstemeyer, M.F., McDowell, D.L., 1995. Double slip polycrystal plasticity and complex loading of OFHC copper. In: Sture, S. (Ed.), Proc. of 10th Conf. of Eng. Mech., vol. 2. Boulder, ASCE, pp. 1026-1029.
31. Hosford, W.F., 1972. J. Appl. Mech., Trans. ASME E 39, 607.
32. Hosford, W.F., Zeisloft, R.H., 1972. The anisotropy of age-hardened Al-4 Pct Cu single crystals during plane-strain compression. Met. Trans. 3 (1), 113-121.
33. Hosford, W.F., Caddell, R.M., 1983. Metal Forming: Mechanics and Metallurgy. Prentice-Hall, Inc., Englewood Cliffs, NJ.
34. Hughes, D.A., 1993. Microstructural evolution in a non-cell forming material: Al-Mg. Acta Metall. Mater. 41, 1421-1430.
35. Hughes, D., Hansen, N., 1991. Microstructural evolution in nickel during rolling and torsion. Mater. Sci. Technol. 7.
36. Hughes, D.A., Hansen, N., 1995. High angle boundaries and orientation distributions at large strains. Scripta Metall. (in press).
37. Hughes, D.A., 1995. The evolution of deformation microstructures and local orientations. In: Hansen, N., Juul-Jensen, D., Liu, Y.L., Ralph, B. (Eds.), Proc. of 16th Riso Int. Symp., Microstructural and Crystallographic Aspects of Recrystallization. Roskilde, Denmark.
38. Hutchinson, J.W., 1976. Bounds and self-consistent estimates for creep of polycrystalline materials. Proc. R. Soc. Lond. A 348, 101-127.
39. Iwakuma, T., Nemat-Nasser, S., 1984. Finite elastic-plastic deformation of polycrystalline metals. Proc. R. Soc. Lond. A 394, 87-119.
40. Jordan, E.H., Walker, K.P., 1992. A viscoplastic model for single crystals. J. Eng. Mater. Technol. 114, 19-26.
41. Kocks, U.F., 1970. The relation between polycrystal deformation and single-crystal deformation. Met. Trans, 1, 1121.
42. Kocks, U.F., Canova, G.R., 1981. How Many Slip Systems and Which?, Def. of Polycrystals: Mechanisms and Microstructures, pp. 35-44.
43. Kocks, U.F., Chandra, H., 1982. Slip geometry in partially constrained deformation. Acta Metall. 30, 695-709.
44. Kroner, E., 1961. Zur plastischen Verformung des Vielkristalls. Acta Metall. 9, 155.
45. Kuhlmann-Wilsdorf, D., 1968. In: Hirth, J.P., Weertman, J. (Eds.), Workhardening. Gordon and Breach, p. 97.
46. Kuhlmann-Wilsdorf, D., 1975. Recent progress in understanding of pure metals and alloy hardening. In: Proc. AIME, Work Hardening in Tension and Fatigue. Cincinnati, OH, pp. 1-44.
47. Kuhlmann-Wilsdorf, D., 1989. Theory of plastic deformation: Properties of low energy dislocation structures. Mater. Sci. Eng. A 113, 1-41.
48. Kuhlmann-Wilsdorf, D., Hansen, N., 1991. Geometrically necessary, incidental and subgrain boundaries. Scripta Metall. 25, 1557-1562.
49. Leffers, T., 1992. A model for rolling deformation with the grains subdivided into cell blocks. In: Proc. of the 13th Riso International Symposium on Mater. Sci.: Modeling of plasic deformation and its engineering applications, p. 7.
50. Leffers, T., Hansen, N., 1992. Texture, anisotropy, microstructure, and models. In: Proc. of the 13th Riso International Symposium on Mater. Sci.: Modeling of Plastic Deformation and its Engineering Applications, pp. 57-77.
51. Lin, T.H., 1957. Analysis of elastic and plastic strains of face-centered cubic crystals. J. Mech. Phys. Solids 5, 143.
52. Lubarda, V.A., Shih, C.F., 1994. Plastic spin and related issues in phenomenological plasticity. J. Appl. Mech. 61, 524-529.
53. Lustig, S., 1995. Microstructural Analysis of Finite Deformation in FCC Polycrystals. MS, Georgia Institute of Technology.
54. Mathur, K.K., Dawson, P.R., 1989. On modeling the development of crystallographic texture in bulk forming processes. Int. J. Plasticity 5, 67-94.
55. McDowell, D.L., Moosbrugger, J.C., 1992. Continuum slip foundations of elasto-viscoplasticity. Acta Mech. 93, 73-87.
56. Miller, M.P., 1993. Improved Constitutive Laws for Finite Strain Inelastic Deformation. Ph.D. thesis, Georgia Institute of Technology.
57. Molinari, A., Canova, G.R., Ahzi, S., 1987. A self consistent approach to the large deformation polycrystal viscoplasticity. Acta Metall. 35 (12), 2983-2994.
58. Mughrabi, H., 1983. Dislocation wall and cell structures and long range internal stresses in deformed metal crystals. Acta Metall. Mater. 31, 1367-1379.
59. Nouailhas, D., Culie, J.P., Cailletaud, G., and Meric, L., 1992. Multiaxial stress-strain behavior of nickel-base single crystals: Finite element analysis. In: Proc. MECAMAT 92, Int. Seminar on Multiaxial Plasticity, Laboratoire de Mecanique et Technologie. Cachan, France, pp. 712-742.
60. Nye, J.F., 1953. Some geometrical relations in dislocated crystals. Acta Metall. 1, 153-162.
61. Peirce, D., Asaro, R.J., Needleman, A., 1982. An analysis of nonuniform and localized deformation in ductile single crystals. Acta. Metall. 30, 1087-1119.
62. Peirce, D., Asaro, R.J., Needleman, A., 1983. Material rate dependence and localized deformation in cystalline solids. Acta Metall. 31, 1951-1976.
63. Petch, N.J., 1953. The cleavage strength of polycrystals. J. Iron Steel Inst. 174, 25-28.
64. Poynting, J.H., 1909. On pressure perpendicular to the shear planes in finite pure shears and on the lengthening of loaded wires when twisted. Proc. R. Soc. Lond. A 82, 546-558.
65. Rashid, M.M., Nemat-Nasser, S., 1990. A constitutive algorithm for rate dependent crystal plasticity. Comput. Methods Appl. Mech. Eng. 94, 201-228.
66. Rashid, M.M., 1990. High strain rate plastic flow in metallic single crystals. Ph.D. dissertation, UCSD.
67. Rice, J.R., 1971. Inelastic constitutive relations for solids: An internal-Variable theory and its application to metal plasticity. J. Mech. Phys. Solids 9, 433-455.
68. Sachs, G.Z., 1928. Verein Deut. Ing. 72, 734.
69. Saetre, T.O., Ryum, N., 1995. On grain and subgrain rotations in two dimensions. Metall. Mater. Trans. A 26A, 1687-1697.
70. Shrivistava, S.C., Jonas, J.J., Canova, G., 1982. Equivalent strain in large deformation torsion testing: Theoretical and practical considerations. J. Mech. Phys. Solids 30, 75-90.
71. Taylor, G.I., Elam, C.F., 1923. The distortion of an aluminum crystal during a tensile test. Proc. R. Soc. Lond. A 102, 643-667.
72. Taylor, G.I., 1938. Plastic strain in metals. J. Inst. Met. 62, 307.
73. Tome, C., Canova, G.R., Kocks, U.F., Christodoilou, N., Jonas, J.J., 1984. The relation between macroscopic strain hardening in FCC polycrystals. Acta Metall. 32 (10), 1637-1653.
74. Ungar, T., Toth, L.S., Illy, J., Kovacs, I., 1986. Dislocation structure and work hardening in polycrystalline OFHC copper rods deformed by torsion and tension. Acta Metall. 34 (7), 1257-1267.
75. Van Houtte, P., 1982. On the equivalence of the relaxed taylor theory and Bishop-Hill theory for partially constrained plastic deformation of crystals. Mater. Sci. Eng. 55, 69-77.
76. Wilmanski, K., 1992. Macroscopic theory of evolution of deformation textures. Int. J. Plasticity 8, 939-975.