Microstructural development and creep deformation in equiaxed γ, γ + α2, and γ + α2 + B2 titanium aluminides

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 29, Issue 13, 1998, Pages 965-978

  Ott, Eric A ^a   Pollock, Tresa M ^a  

^a CARNEGIE MELLON UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

B2 STRUCTURES; CREEP DEFORMATIONS; CREEP PROPERTIES; CREEP RATES; DISLOCATION GLIDE; MICROSTRUCTURAL DEVELOPMENT; MINIMUM CREEP RATES; MO ADDITIONS; ORIENTATION VARIANTS; POWER-LAW; RECRYSTALLIZATIONS; STRAIN PATHS; STRESS DROP; STRESS EXPONENTS; STRESS JUMPS; STRESS TEST; TITANIUM ALUMINIDES; UP-QUENCHING;

ALLOYS; ALUMINUM; CHROMIUM; CREEP; CREEP TESTING; MOLYBDENUM; MORPHOLOGY; NIOBIUM; NIOBIUM ALLOYS; QUENCHING; SINGLE CRYSTALS; TEXTURES; TITANIUM; ANNEALING; COOLING; DISLOCATIONS (CRYSTALS); HEAT TREATMENT; METALLOGRAPHIC MICROSTRUCTURE; PHASE TRANSITIONS; TWINNING;

CREEP RESISTANCE; TITANIUM ALLOYS;

CREEP RESISTANCE; POWER LAW STRESS EXPONENT; RAPID UP QUENCHING; SINGLE STRESS TEST; STRAIN PATH DEPENDENCE; STRESS DROP; STRESS JUMP; TITANIUM ALUMINIDE;

EID: 0032026926     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-998-1006-0     Document Type: Article

References (49)

1. H. Oikawa: Mater. Sci. Eng. A, 1992, vol.A153, pp. 427-432
2. B.D. Worth, J.W. Jones, and J.E. Allison: Metall. Mater. Trans. A, 1995, vol.26A, pp. 2961-2972
3. M. Es-Souni, A. Bartles, and R. Wagner: Structural Intermetallics, TMS, Warrendale, PA, 1993, pp. 335-343
4. G.B. Viswanathan and V.K. Vasudevan: Gamma Titanium Aluminides, TMS, Warrendale, PA, 1995, pp. 967-974
5. M. Es-Souni, A. Bartles, and R. Wagner: Mater. Sci. Eng. A, 1993, vol.A171, pp. 127-141
6. Z. Jin, S.-W. Cheong, and T.R. Bieler: Gamma Titanium Aluminides, TMS, Warrendale, PA, 1995, pp. 975-983
7. S.W. Schwenker and Y.-W. Kim: Gamma Titanium Aluminides, TMS, Warrendale, PA, 1995, pp. 985-992
8. D.A. Wheeler, B. London, and D.E. Larsen, Jr.: Scripta Metall., 1992, vol.26, pp. 939-944
9. M. Lu and K.J. Hemker: Creep and Fracture of Engineering Materials and Structures, TMS, Warrendale, PA, 1996, pp. 299-308.
10. S.C. Cheng, J. Wolfenstine, and O.D. Sherby: Metall. Trans. A, 1992, vol.23A, pp. 1509-1513
11. N. Hamada, Y. Ishikawa, K. Maruyama, and H. Oikawa: Mater. Sci. Eng. A, 1995, vols. A192-A193, pp. 716-721
12. Y. Ishikawa, K. Maruyama, and H. Oikawa: Mater. Trans. JIM, 1992, vol.33, pp. 1182-1184
13. T. Takahashi, H. Nagai, and H. Oikawa: Mater. Sci. Eng. A, 1990, vol.A128, pp. 195-200.
14. S.L. Kampe, J.D. Bryant, and L. Christodoulou: Metall. Trans. A, 1991, vol.22A, pp. 447-454
15. J. Triantafillou, J. Beddoes, L. Zhao, and W. Wallace: Scripta Metall., 1994, vol.31, pp. 1387-1392
16. D.I. Kimm and J. Wolfenstine: Scripta Metall., 1994, vol.30, pp. 615-619
17. P.L. Martin, M.G. Mendiratta, and H.A. Lipsitt: Metall. Trans. A, 1983, pp. 2170-2174
18. P.L. Martin and H.A. Lipsitt: Creep and Fracture of Engineering Materials and Structures: Proc. 4th Int. Conf., The Institute of Metals, London, 1990, pp. 255-263
19. R.W. Hayes and B. London: Acta Metall. Mater., 1992, vol.40, pp. 2167-2175
20. C. Tonnes, J. Rosler, R. Baumann, and M. Thumann: in Structural Intermetallics, R. Darolia, J.J. Lewendowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 241-245
21. P.D. Crofts, P. Bowen, and I.P. Jones: Scripta Metall., 1996, vol.35, pp. 1391-1396
22. G.E. Fuchs: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1995, vol.364, pp. 799-804.
23. S.-C. Huang and E.L. Hall: Metall. Trans. A, 1991, vol.22A, pp. 427-439
24. P. Wang, D. Veeraraghavan, and V.K. Vasudevan: Solid-Solid Phase Transformations, TMS, Warrendale, PA, 1994, pp. 303-308
25. C.M. Austin and T.J. Kelly: Structural Intermetallics, TMS, Warrendale, PA, 1993, pp. 143-150
26. N. Masahashi, Y. Mizuhara, M. Masuo, T. Hanamura, M. Kimura, and K. Hashimoto: Iron Steel Inst. Jpn. Int., 1991, vol.31, pp. 728-737
27. M. Kimura, K. Hashimoto, and H. Morikawa: Mater. Sci. Eng. A, 1992, vol.A152, pp. 54-59.
28. P.L. Martin, H.A. Lipsitt, N.T. Nuhfer, and J.C. Williams: Titanium '80, Science and Technology, 4th World Conf. on Titanium, Metallurgical Society of ATME, Warrendale, PA, 1980, pp. 1245-1254
29. J. Shi, Z. Pu, Z. Zhong, and D. Zou: Scripta Metall., 1992, vol.27, pp. 1331-1336
30. S. Das and H. Perepezko: Scripta Metall., 1991, vol.25, pp. 1193-1198
31. Y.G. Li and M.H. Loretto: Acta. Metall., 1994, vol.42, pp. 2913-2919
32. T.J. Kelly, M.C. Juhas, and S.C. Huang: Scripta Metall., 1993, vol.29, pp. 1409-1414
33. P.R. Bhowal, H.F. Merrick, and D.E. Larsen, Jr.: Mater. Sci. Eng. A, 1995, vols. A192-A193, pp. 685-690
34. L. Zhao, J. Beddoes, D. Morphy, and W. Wallace: Mater. Sci. Eng. A, 1995, vols. A192-A193, pp. 957-964
35. P.L. Martin, C.G. Rhodes, and P.A. McQuay: Structural Intermetallics, TMS, Warrendale, PA, 1993, pp. 177-186
36. Y. Mizuhara and N. Masahashi: Scripta Metall., 1992, vol.27, pp. 1079-1084
37. R.E. Schafrik: Metall. Trans. A, 1977, vol.8A, pp. 1003-1006
38. M.S. Loveday: Mechanical Testing, The Institute of Metals, London, 1988, pp. 43-107.
39. R. Strychor, J.C. Williams, and W.A. Soffa: Metall. Trans. A, 1988, vol.19A, pp. 225-234
40. Y.-W. Kim: Acta Metall., 1992, vol.40, pp. 1121-1134
41. Y.S. Yang and S.K. Wu: Scripta Metall., 1990, vol.24, pp. 1801-1806
42. K. Muraleedharan, T. Pollock, P. Wang, and V.K. Vasudevan: Carnegie Mellon University, Pittsburgh, PA, unpublished research, 1997.
43. T. Takahashi, H. Nagai, and H. Oikawa: Mater. Trans. JIM, 1989, vol.30, pp. 1044-1051
44. T.R. Bieler, D.Y. Seo, R.S. Beals, C.H. Wu, and S.L. Choi: Gamma Titanium Aluminides, 1995, pp. 795-802.
45. O.D. Sherby and P.M. Burke: Progr. Mater. Sci., 1968, vol.13, pp. 325-390
46. H.C. Chang and N.J. Grant: Trans. AIME, 1956, vol.206, pp. 544-550
47. M.F. Bartholomeusz, Q. Yang, and J.A. Wert: Scripta Metall., 1993, vol.29, pp. 389-394
48. M. Lu and K.J. Hemker: Acta Mater., 1997, vol.45, pp. 3573-3585
49. V.M. Aubourg, D. Eylon, M.M. Keller, C.M. Austin, and S.J. Balsone: Titanium '95 Science and Technology, 8th World Conf. on Titanium, The Institute of Metals, London, 1995, pp. 520-526