Laboratory-made roller compacted concretes containing dry bottom ash: Part I - Mechanical properties

ACI Materials Journal

Volumn 95, Issue 2, 1998, Pages 121-130

  Ghafoori, Nader ^a   Cai, Yuzheng ^a  

^a NONE

Author keywords

Bottom ash; Compaction; Compression; Drying shrinkage; Flexure; Modulus of elasticity; Splitting tension

Indexed keywords

BENDING STRENGTH; COMPACTION; COMPOSITION EFFECTS; COMPRESSIVE STRENGTH; CONSOLIDATION; DEFORMATION; DRYING; ELASTIC MODULI; MOISTURE DETERMINATION; SHRINKAGE; STIFFNESS; TENSILE STRENGTH;

DRY BOTTOM ASH; ROLLER COMPACTED CONCRETES; SPLITTING TENSION;

CONCRETE AGGREGATES;

EID: 0032026381     PISSN: 0889325X     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (34)

1. Energy Information Administration, Cost and Quality of Fuels for Electric Utility Plants 1991, Office of Coal, Nuclear, Electric and Alternate Fuels, U.S. Department of Energy, Washington, D. C., Aug. 1992, 27 pp.
2. Torrey, S., "Coal Ash Utilization," Pollution Technology Review No. 48, Noyes Data Corporation, Park Ridge, New Jersey, 1978, 370 pp.
3. EPA Report to Congress, Wastes from the Combustion of Coal by Electric Utility Power Plants, United States Environmental Protection Agency, Feb. 1988, 44 pp.
4. Ghafoori, N., "Utilization of Type 'C' Bottom Ash in Cement-Based Concrete Mixtures," Annual Report, Material Technology Center, Southern Illinois University at Carbondale, May 1992, pp. 55-76.
5. Piggott, R. W., and Naas, O. O., "Roller Compacted Concrete Pavements in British Columbia, Canada," a Report in Symposium on Roller Compacted Concrete in Denver, May 1985, pp. 31-47.
6. Department of the Army, Office of the Chief of Engineers, "Roller Compacted Concrete (RCC) Pavement for Airfields, Roads, Streets and Parking Lots," Corps of Engineers Guide Specification 02520, in preparation, Washington, D.C., 1980.
7. American Society for Testing and Materials, Annual Book of ASTM Standards, Vol. 04.02, Philadelphia, 1994, 754 pp.
8. Ahmad. S, "Properties of Confined Concrete Under Static and Dynamic Loads," PhD thesis, University of Illinois at Chicago Circle, Department of Materials Engineering, Chicago, March 1981.
9. Creep and Shrinkage of Concrete: Effect of Materials and Environment, SP-135, American Concrete Institute, Detroit, 1992, 97 pp.
10. Andersson, R., "Roller Compacted Concrete Pavements-Physical Properties (Belaggningar av valtbetong-fysikaliskaengenskaper)," CBI Report No. Ra 3:86, Swedish Cement and Concrete Research Institute, Stockholm, 1986 (in Swedish).
11. Andersson, R., "Swedish Experiences with RCC," Concrete International: Design & Construction, Vol. 9, No. 2, Feb. 1987, pp. 18-24.
12. Brett, D. M., "RCC Pavements in Tasmania, Australia," Roller Compacted Concrete 11, Proceedings of the Conference sponsored by the Construction, Geotechnical Engineering, and Materials Engineering Divisions of the American Society of Civil Engineers, San Diego, Feb. 29-Mar. 2, 1988.
13. Bucholc, J. P., "Utilization of Pulverized Coal Combustion Bottom Ash in Structural Concrete," MS thesis, Department of Civil Engineering, Southern Illinois University, Carbondale, Illinois, May 1993, 210 pp.
14. Cannon, R. W., "Design Considerations for Roller Compacted Concrete and Rollcrete in Dams," Concrete International: Design & Construction, Vol. 7, No. 12, Dec. 1985, pp. 50-58.
15. Greene, J. L. "Friction Characteristics Evaluation of Roller Compacted Concrete," letter from Department of the Air Force (DEMP) to U.S. Army Corps of Engineers Waterways Experiment Station, June 16, 1988.
16. Hansen, K. D., Roller Compacted Concrete, Water Control Applications in the U.S. and Canada, Portland Cement Association, Denver, July 1979, 3 pp.
17. Holder, R., "Roller Compacted Concrete Pavement Tactical Equipment Hardstand, Line Item 434," Contract No. DACA 83-C-0188, Fort Hood, Texas, 1984, Fort Worth District, Corps. of Engineers.
18. Jameson, G. W.; Sharp, E. G.; Bailey, D. P.; and Warwick, R. A., "An investigation of the Suitability of Roller Compacted Concrete for High-Speed Traffic Pavements," Australian Road Research Board Research Report No. 181, Victoria, Australia, June 1990.
19. Larsen, J. L., "Roller Compacted Concrete Pavement Design Practices for Intermodal Freight Terminals at the Port of Tacoma," Sverdrup & Parcel and Associates, Inc. Bellevue, Washington. TRB State-of-the-Art Report No. 4 - Facing The Challenge, 1987.
20. Mehta, P. K., Concrete Structure, Properties, and Materials, Prentice-Hall, Inc., Englewood Cliffs, 1986, 450 pp.
21. Mindess, S., and Young, J. F., Concrete, Prentice-Hall, Inc., Englewood Cliffs, 1981, 671 pp.
22. Munn, W. D., "Roller-compacted Concrete Paves Factory Roads," Highway and Heavy Construction, Cahners Publishing Company, New York, Sept. 1989.
23. Oluokun, F. A.; Burdette, E. G.; and Deatherage, J. H., "Elastic Modulus, Poison's Ratio, and Compressive Strength Relationships at Early Ages," ACI Materials Journal, Vol. 88, No. 1, Jan.-Feb. 1991, pp. 3-10.
24. Pittman, D., and Ragan, S. A., "A Guide for Design and Construction of Roller Compacted Concrete Pavements," GL86, U.S. Army Corps of Engineers Waterways Experiment Station, Vicksburg, 1986, 26 pp.
25. Pittman, D. W., "RCC Pavement Construction and Quality Control," Proceedings, Roller Compacted Concrete II, San Diego, 1988, pp. 438-453.
26. Pittman, D. W., "The Effects of the Construction Process on Selected Fresh and Hardened Properties of Roller-Compacted Concrete Pavements," US Army Corps of Engineers Waterways Experiment Station Technical Report GL-89-22, Vicksburg, Sept. 1989.
27. Rollings, R. S., "Design of Roller Compacted Concrete Pavements," Proceedings, Roller Compacted Concrete II, San Diego, 1988, pp. 454-466.
28. Ross, A. D., "Creep and Shrinkage of Plain, Reinforced, and Prestressed Concrete: A General Method of Calculation," Journal Institution of Civil Engineers, London, Nov. 1943, pp. 38-57.
29. Schrader, E. K., "Compaction of Roller Compacted Concrete," Consolidation of Concrete, SP-96, American Concrete Institute, Detroit, 1987, pp. 77-101.
30. Schrader, E. K., "Roller-Compacted Concrete," Military Engineer, Vol. 69, Sept.-Oct. 1977, pp. 314-317.
31. Selvig, W. A., and Gibson, F. H., "Analysis of Ash From United States Coals," Bulletin 567, Bureau of Mines, Washington, D. C.
32. "Structural Design of Roller-Compacted Concrete for Industrial Pavements," IS233.01P, Portland Cement Association, Skokie, 1987, pp. 8.
33. U.S. Army Corps of Engineers, "Engineering and Design, Roller Compacted Concrete," Engineer Manual No. 1110-2-2006, 1985, Department of the Army, Washington, D. C.
34. U.S. Army Corps of Engineers, "Thickness Design of Roller-Compacted Concrete Pavements for Airfields, Roads, Streets and Parking Areas," ETL 1110-1-141, Washington, D. C., 1988, pp. 3.