Nanosized WC-Co holds promise for the future

Metal Powder Report

Volumn 53, Issue 3, 1998, Pages 26-33

[No Author Info available]

Author keywords

[No Author keywords available]

Indexed keywords

CONSOLIDATION; GRAIN SIZE AND SHAPE; HARDNESS; METALLIC MATRIX COMPOSITES; NANOSTRUCTURED MATERIALS; STANDARDS; SYNTHESIS (CHEMICAL); TOUGHNESS;

CEMENTED CARBIDES; NANOSIZE MATERIALS;

TUNGSTEN CARBIDE;

EID: 0032010464     PISSN: 00260657     EISSN: 18734065     Source Type: Journal    
DOI: 10.1016/S0026-0657(97)89643-9     Document Type: Article

References (59)

1. H.J. Scussel, 'Friction and Weat of Cemented Carbides', ASM Handbook, Vol 18. ASM International, (1992), pp. 796.
2. Y. Zhang and J. Zhang, 'Nanometer WC-Co Carbide', Xiyou Jinshu Cailiao Yu Gongcheng, 24(2), (1995), pp. 18-21 (Chinese).
3. 2 Gas Atmosphere', Poroshk. Metall. (Kiev) 910, (1995), pp. 21-26 (Russian).
4. T.A. Emelianova et al., 'Kinetics of Wet Grinding of Submicron Tungsten Carbide Powders', Metally 1, (1992), pp. 75-80 (Russian).
5. I. Morgenthal et al., 'Tungsten Carbide-Cobalt Superfine Grain Hard Metals', Poster Symp. Materialforsch. 3, (1991). pp. 2371-2373 (German).
6. S. Raghunathan et al., 'Synthesis and Evaluation of Nanophase Tungsten-Tungsten Carbide Composites', Microcomposites and Nanophane Materials, (edited by D.C. Van Aken et al.). The Minerals, Metals & Materials Society, (1991), pp. 81-96.
7. R. Porat and A. Dancziger, 'Mechanical Properties and Uses of Cemented Carbide Grades Made with Submicron Tungsten Carbide' PM 1990's, Int. Conf. Powder Metall. 3, (1990), pp. 158-162.
8. L. Gao and B.H. Kear, 'Synthesis of Nanophase WC Powder by a Displacement Reaction Process', NanoStruct. Mater., 9, (1997), pp. 205-208.
9. L. Gao and B.H. Kear, 'Synthesis of Nanophase W and WC Powders from Ammonium Metatungstate' Tungsten Refract. Met. 3-1995, Proc. Int. Conf., 3rd 1995 (edited by A. Bose and R.J. Dowding) (1996), Metal Powder Industries Federation: Princeton, NJ, pp. 247-256.
10. L. Gao and B.H. Kear, 'Low Temperature Carburization of High Surface Area Tungsten Powders' NanoStruct. Mater. 5(5), (1995), pp. 555-569.
11. B.H. Kear and P.R. Strutt, 'Chemical Processing and Applications for Nanostructured Materials', NanoStruct. Mater. 6(14), (1995), pp. 227-236.
12. N.C. Angastiniotis and B.H. Kear, 'Bulk Synthesis of Novel Nanocrystalline and Amorphous Tungsten-Base Materials', Mater. Sci. Forum 179-181, (1995), pp. 357-362.
13. B.H. Kear and L.E. McCandlish, 'Chemical Processing and Properties of Nanostructured WC-Co Materials', NanoStruct. Mater. 3(16), (1993), pp. 19-30.
14. L.E. McCandlish et al., 'Nanostructured WC-Co Composite Powders', Adv. Powder Metall. Part. Mater. (Vol. 5, Specialty Materials and Composites), (1994), pp. 329-337.
15. B.H. Kear et al., 'Synthesis and Processing of Nanostructured Tungsten-Base Materials', Advanced Topics in Materials Science and Engineering, (Proc. Mex.-USA Symp. 1st 1991) (edited by J.L. Moran-Lopez and J.M. Sanchez), (1993), Plenum, New York, pp. 315-332.
16. N.C. Angastiniotis et al., 'Formation and Alloying of Nanostructured β-W Powders', NanoStruct Mater., 1, (1992), pp. 293-302.
17. L.E. McCandlish et al., 'Processing and Properties of Nanostructured WC-Co', NanoStruct. Mater., 1, (1992), pp. 119-124.
18. J.R. Whyte et al., 'Preparation of Nanophase Tungsten Carbide-Cobalt Composite Powders in a Fluidized Bed Reactor', AIChE Symp. Ser. No. 289 (Fluidized Processes), (1992), pp. 116-121.
19. B.H. Kear et al., 'Thermochemical Processing of Nanostructured Materials', Process. Prop. Appl. Met. Ceram. Mater., Proc. Int. Conf. (edited by M.H. Loretton and C.J. Beevers), 2, (1992). Eng. Mater. Adv. Serv.: Warley, UK, pp. 1045-1054.
20. I. E. McCandlish et al., 'Characterization and Properties of Chemically Processed Nanophase Tungsten Carbide-Cobalt Composites', High Performance Composites for the 1990's, Proc. TMS Northeast Reg. Symp., 6th 1990 (edited by S.K. Das et al.) (1991), Miner. Met. Mater. Soc.: Warrendale, PA, pp. 227-237.
21. B.H. Kear et al., 'Chemically Processed Nanophase Tungsten Carbide-Cobalt Composites', Frontiers of Chemistry: Materials by Design, 2, (1990), ACS's Chemical Abstracts Service, Columbus, Ohio, pp. 65-68.
22. L.E. McCandlish et al., 'Chemical Processing of Nanophase Tungsten Carbide-Cobalt Composite Powders', Mater. Sci. Technol.,. 6(10), (1990), pp. 953-957.
23. L.E. McCandlish and R.S. Polizzotti, 'Control of Composition and Microstructure in the Cobalt Tungsten Carbon System Using Chemical Synthetic Techniques', Solid State Ionics, 32-33 (Pt. 2), (1989), pp. 795-801.
24. L.E. McCandlish et al., 'Metastable Nanocrystalline Carbides in Chemically Synthesized Tungsten-Cobalt Carbide-Ternary Alloys', in Multicomponent Ultrafine Microstructures, (edited by L.E. McCandlish et al.) MRS Symp. Proc., Vol. 132, (1989), pp. 67-72.
25. R.S. Polizzotti et al., 'Multiphase Composite Particle Containing a Distribution of Nonmetallic Compound Particles', US Patent 5,338,330 (16 August 1994).
26. R.S. Polizzotti et al., 'Metal Article and Method for Producing the Same', US Patent 5,441,553 (15 August 1995).
27. L.E. McCandlish et al., 'Spray Conversion Process for the Production of Nanophase Composite Powders', US Patent 5,352,269 (4 October 1994).
28. L.E. McCandlish et al., 'Carbothermic Reaction Process for Making Nanophase WC-Co Powders', US Patent 5,230,729 (27 July 1993).
29. L.E. McCandlish et al., 'Spray Conversion Process for the Production of Nanophase Composite Powders', S. African ZA 91 00,722 (Cl. BOID) (27 November 1991; Appl. 91/722, 31 January 1991), 37 pp.
30. P. Seegopaul and L. E. McCandlish, 'Nanostructured WC-Co Powders: Review of Application, Processing and Characterization Properties', Adv. Powder Metall. Part. Mater. 3, (1995), pp 13/3-13/15.
31. C. Conner, 'Meeting the Needs of the End-User Through Ultrafine Powder Technology', Presented at 7th Int. Tung. Symp., Goslar, Germany, 1996
32. Y.T. Zhu and A. Manthiram, 'Influence of Processing Parameters on the Formation of WC-Co Nanocomposite Powder Using a Polymer as Carbon Source', Composites, Part B, 27 B(5), (1996), pp. 407-413.
33. Y.T. Zhu and A. Manthiram, 'A New Route for the Synthesis of WC-Co Nanocomposites', J. Am. Ceram. Soc., 77, (1994), p. 2777.
34. J.J. Stiglich et al., 'Synthesis of Nano WC/Co for Tools and Dies', Tungsten Refract. Met. 31995, Proc 3rd Int. Conf. 1995 (edited by A. Bose and K.J. Dowding), (1996), Metal Powder Industries Federation, pp. 229-236.
35. S. Wahlberg et al., 'Nanostructured Hard Material Composites by Molecular Engineering 1. Synthesis from Soluble Tungstate Salts', NanoStruct. Mater. 9, (1997), pp. 105-108.
36. S. Raghunathan et al., 'Tungsten Carbide Technologies', Adv. Mater. Process., 4, (1996), pp. 21-23.
37. R.J. Dowding et al., 'Synthesis and Consolidation of Nanoparticles', in Advances in Powder Metallurgy & Particulate Materials, (edited by C. Lall and A.J. Neupaver), (1994), pp. 45-58.
38. S. Eidelman and X. Yang, 'Three Dimensional Simulation of HVOF Spray Deposition of Nanoscale Materials', NanoStruct. Mater., 9, (1997), pp. 79-84
39. L.E. McCandlish et al. 'Low-Pressure Plasma Sprayed Coatings of Nanophase Tungsten Carbide-Cobalt', in Protective Coating: Processing and Characterization: Proc. TMS Northeast Reg. Meet. 5th 1989 (edited by R.M Yazici), (1990), TMS, Warrendale, PA, pp. 113-119.
40. R. Porat et al., 'Dilatometric Study of the Sintering Mechanism of Nanocrystalline Cemented Carbides', NanoStruct. Mater., 7. (1996), pp. 429-436.
41. K. Mohan and P.R. Strutt, 'Observation of Co Nanoparticle Dispersion in WC Nanograms in WC-Co Cermets Consolidated from Chemically Synthesized Powders', NanoStruct. Mater., 7, (1996), pp. 547-555.
42. L. Zhang and T.E. Madey, 'Initial Stages of Sintering of Nanostructured WC7wt%Co', NanoStruct. Mater., 2, (1993), pp. 487-493.
43. X. Fang and J.W. Eason, 'Study of Nanostructured WC-Co Composites', Proc. 13th International Plansee Seminar, Vol 3, (edited by H. Bildstein and R. Eck), (1993), Metallwerk Plansee, Reutte, pp. 625-638.
44. L. Wu, et al., 'Grain Growth Inhihition in Sintering of Nanostructured WC-Co Alloys', Proc. 13th International Plansee Seminar, Vol 3, (edited by H. Bildstein and R. Eck), (1993), Metallwerk Plansee, Reutte, pp. 667-679.
45. L.E. McCandlish et al., The Inhihition of WC Grain Growth during Sintering of Nanostructured WC-Co Powder Compacts', Adv. Powder Metall. Part. Mater. 3, (1995), 13/17-13/23.
46. D.F. Carroll, 'Processing and Properties of Ultrafine WC/Co Hard Materials', Proc. of the 14th Int. Plansee Conf. Abstract No. 89, (1997).
47. Sandvik Coromant Co, 'Carbide Recycling Program Reaps Big Returns, Saves Environment', Mod. Application News (MAN), (December 1997), pp. 38-39.
48. M.G. Park and J. K. Han, 'Processing of Reclaimed Tungsten Carbide/Cobalt Powders with Virgin Properties', Tachan Kumsok Hakhoechi, 30(8), (1992), pp. 996-1004 (Korean).
49. K. Hirose and I. Aoki, 'Recycling Cemented Carbides Without Pollution Sorting Charging Material for Xinc Process, Int. Conf. Process. Mater. Prop., 1st (edited by H. Henein and T. Oki), (1993), Miner. Met. Mater. Soc., Warrendale, PA, pp. 845-848.
50. G N. Srinivasan and A. Varadharaj, 'Electrolytic Recovery of Tungsten Carbide and Cobalt from Scraps/Rejects of Cemented Tungsten Carbide', Trans. Powder Metall. Assoc. India 19, (1992), pp. 90-96.
51. S.A. Vasilev and E.N. Kuznetsova, 'Redox Processing of Dust Wastes from Finish Grinding of Tungsten Carbide Tools', USSR SU 1,770,425 (Cl. C22B34/36) (23 Oct 1992), From Izobreteniya, 39, (1992), p. 88.
52. S.A. Vasilev and E.N. Kuznetsova, 'Redox Processing of Dust Wastes from Finish Grinding of Tungsten Carbide Tools', USSR SU 1,770,425 (Cl. C22B34/36) (23 Oct 1992), From Izobreteniya, 39, (1992), p. 88.
53. N.Y. Doroshkevich et al., 'Manufacture of Sintered Tungsten containing Hard Alloys from Chip Waste, Bord'. USSR SU 1,717,283, (Cl. B22F3/12) (7 March 1992), From Izobreteniya, 9, (1992), p. 44.
54. N.Y. Doroshkevich et al., 'Manufacture of Sintered Tungsten containing Hard Alloys from Chip Waste, Bord'. USSR SU 1,717,283, (Cl. B22F3/12) (7 March 1992), From Izobreteniya, 9, (1992), p. 44.
55. E. Lassner, 'Erom Tungsten Concentrates and Scrap to Highly Pure Ammonium Paratungstate (APT)', in The Chemistry of Non-Sag Tungsten, (edited by L. Bartha et al.), (1995), Pergamon, pp. 35-41.
56. S.L. Gromov and A.N. Zolotnikov, 'Recycling of Tungsten-Containing Sludges', Lhim. Prom-st (Moscow), 11, (1993), pp. 579-580 (Russian).
57. J-C. Lin et al., Jou, 'Selective Dissolution of the Cobalt Binder from Scraps of Cemented Tungsten Carbide in Acids Containing Additives' Hydrometallurgy, 43(13), (1996), pp. 47-61.
58. A.T. Santhanam et al., 'Cemented Carbides', Metals Handbook, Vol. 2, 10th edn, (1990), ASM Int., pp. 950-977.
59. J.D. Schell and K.P. Taylor, 'Wear of Jet Engine Components', ASM Handbook, Vol. 18, (1992), ASM Int., pp. 588-592.