Modeling the chip-work contact force for chip breaking in orthogonal machining with a flat-faced tool

Journal of Manufacturing Science and Engineering, Transactions of the ASME

Volumn 120, Issue 1, 1998, Pages 49-56

  Ganapathy, B K ^a   Jawahir, I S ^a  

^a UNIVERSITY OF KENTUCKY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CUTTING TOOLS; FORCE MEASUREMENT; INTERFACES (MATERIALS); MACHINING; MATHEMATICAL MODELS; PARAMETER ESTIMATION;

CHIP BREAKING; CHIP FORMATION; FLAT FACED TOOL; ORTHOGONAL MACHINING;

METAL CUTTING;

EID: 0032000726     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.2830110     Document Type: Article

References (33)

1. Ernst, H., and Merchant, M. E., 1941, “Chip Formation, Friction and High Quality Machined Surface,” Surface Treatment of Metah, American Society of Metals, New York, Vol. 29, p. 299.
2. Henriksen, E. K., 1954, “Balanced Design will fit the Chip Breaker to the Job—How to Select?” American Machinist, April 27 and May 10.
3. Henriksen, E. K., 1955, “Findings and Directions in Chip Breaker Research,” paper presented at the 23rd Annual Meeting of Am. Soc. Of Tool Engineers, Los Angeles, California, March 14-18.
4. Jawahir, I. S., 1988a, “The Chip Control Factor in Machinability Assessments: Recent Trends, “Journal of Mechanical Working Technology, Vol. 17, p. 213.
5. Jawahir, I. S., 1988b, “The Tool Restricted Contact as a Major Influencing Factor in Chip Breaking: An Experimental Analysis, “Annals of the CIRP, Vol. 37, p. 121.
6. Jawahir, I. S., 1990, “On the Controllability of Chip Breaking Cycles and Modes of Chip Breaking in Metal Machining, “Annals of the CIRP, Vol. 39, p. 47.
7. Jawahir, I. S., and Oxley, P. L. B., 1988a, “Efficient Chip Breaking at Reduced Power Consumption: An Experimental Analysis,” Proceedings of the 4th International Conference on Manufacturing Engineering, Brisbane, Australia, p. 97.
8. Jawahir, I. S., and Oxley, P. L. B., 1988b, “New Developments in Chip Control Research: Moving Towards Chip Breakability Predictions for Unmanned Manufacture,” Proceedings of Manufacturing International, Atlanta, USA, ASME Publ., Vol. 1, p. 311.
9. Jawahir, I. S., and Zhang, J., 1995, “An Analysis of Chip Curl Development, Chip Deformation and Chip Breaking in Orthogonal Machining, “Transactions ofNAMRI, Vol. 23, p. 109.
10. Kluft, W., Konig, W., Van Luttervelt, C. A., Nakayama, K., and Pekelharing, A. J., 1979, “Present Knowledge of Chip Control, “Keynote Paper, Annals of the CIRP, Vol. 28, p. 452.
11. Knight, W. A., 1968, “Application of the Universal Machinability Chart to the Prediction of Machine Tool Stability,” International Journal of Machine Tool Design and Research, Vol. 8, p. 1.
12. Nakayama, K., 1962a, “Chip Curl in Metal Cutting Process, “Bulletin of the Faculty of Engineering, Yokohama National University, Vol. 11, p. 1.
13. Nakayama, K., 1962b, “A Study on Chip Breaking,” Bulletin of JSME, Vol. 5, p. 142.
14. Nakayama, K., 1963, “Pure Bending Test of Chip: An Approach to the Prediction of Cutting Forces, “Bulletin of the Faculty of Engineering, Yokohama National University, Japan, Vol. 12, p. 1.
15. Nakayama, K., 1984, “Chip Control in Metal Cutting, “Bulletin of Japanese Society of Precision Engineering, Vol. 18, p. 97.
16. Nakayama, K., and Arai, M., 1977, “Roles of Brittleness of Work Material in Metal Cutting,” International Symposium on Influence of Metallurgy on Machinability of Steel, Tokyo, Japan, Sept. 26-28, p. 425.
17. Nakayama, K., and Arai, M., 1980, “The Breakability of Chip in Metal Cutting,” Proceedings of International Conference on Manufacturing Engineering, Melbourne, Australia, p. 6.
18. Nakayama, K., and Tamura, K., 1964, “Hardness Test of Chip, “Bulletin of the Faculty of Engineering, Yokohama National University, Japan, Vol. 13, p. 17.
19. Nakayama, K., and Ogawa, M., 1978, “Basic Rules on the Form of Chip in Metal Cutting, “Annals of the CIRP, Vol. 27, p. 17.
20. Nakayama, K., Arai, M., and Kondo, T., 1981, “Cutting Tools with Curved Rake Face—A Means for Breaking Thin Chips,” Annals of the CIRP, Vol. 30, p. 5.
21. Nigm, M. M., Sadek, M. M., and Tobias, S. A., 1977a, “Dimensional Analysis of the Steady State Orthogonal Cutting Process,” International Journal of Machine Tool Design and Research, Vol. 17, p. 1.
22. Nigm, M. M., Sadek, M. M., and Tobias, S. A., 1977b, “Determination of the Dynamic Cutting Coefficients from Steady State Cutting Data,” International Journal of Machine Tool Design and Research, Vol. 17, p. 19.
23. Spaans, C. 1970, “A Systematic Approach to Three Dimensional Chip Curl, Chip Breaking and Chip Control, “SME paper 70-241.
24. Spaans, C, 1971a, “The Fundamentals of Three-Dimensional Chip Curl, Chip Breaking and Chip Control, “PhD Thesis, TH Delft, Netherlands.
25. Spaans, C, 1971b, “A Comparison of an Ultrasonic Method to Determine the Chip/Tool Contact Length with some other Methods,” Annals of the CIRP, Vol. 19, p. 485.
26. Spaans, C, and Van Geel, P. F. H. J., 1970, “Break Mechanisms in Cutting with a Chip Breaker,” Annals of the CIRP, Vol. 18, p. 87.
27. Stevenson, R., 1992, “The Morphology of Machining Chips Formed During Low Speed Quasi-Orthogonal Machining of CA 360 Brass and a Model for their Formation,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 114, p. 404.
28. Sullivan, K. F., Wright, P. K., and Smith, P. D., 1978, “Metallurgical Appraisal of Instabilities Arising in Machining, “Metals Technology, June 1978, p. 181.
29. Worthington, B., 1975a, “The Effect of Rake Face Configuration on the Curvature of the Chip in Metal Cutting,” International Journal of Machine Tool Design and Research, Vol. 15, p. 223.
30. Worthington, B., 1975b, “The Operation and Performance of a Groove-Type Chip Forming Device,” International Journal of Production Research, Vol. 14, p. 529.
31. Worthington, B., and Rahman, M. H., 1979, “Predicting Breaking with Groove Type Breakers,” International Journal of Machine Tool Design and Research, Vol. 19, p. 121.
32. Worthington, B., and Redford, A. H., 1973, “Chip Curl and the Action of the Groove Type Chip Former,” International Journal of Machine Tool Design and Research, Vol. 13, p. 257.
33. Zhang, Y. Z., 1980, “Chip Curl, Chip Breaking and Chip Control of the Difficult- to-Cut Materials,” Annals of the CIRP, Vol. 29, p. 79.