Surface roughness of orthodontic wires via atomic force microscopy, laser specular reflectance, and profilometry

European Journal of Orthodontics

Volumn 20, Issue 1, 1998, Pages 79-92

  Bourauel, Christoph ^a   Fries, Thomas ^b   Drescher, Dieter ^a   Plietsch, Reinhard ^c  

^a UNIVERSITY OF BONN   (Germany)

^b Fries Research and Technology GmbH   (Germany)

^c KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

DENTAL ALLOY; NICKEL; STAINLESS STEEL; TITANIUM; TITANIUM NICKELIDE;

ARTICLE; ATOMIC FORCE MICROSCOPY; CHEMISTRY; COMPARATIVE STUDY; CORROSION; FRICTION; HUMAN; INSTRUMENTATION; LASER; MATERIALS TESTING; OPTICS; ORTHODONTIC DEVICE; RADIATION SCATTERING; REGRESSION ANALYSIS; SURFACE PROPERTY;

CORROSION; DENTAL ALLOYS; FRICTION; HUMANS; LASERS; MATERIALS TESTING; MICROSCOPY, ATOMIC FORCE; NICKEL; OPTICS; ORTHODONTIC WIRES; REGRESSION ANALYSIS; SCATTERING, RADIATION; STAINLESS STEEL; SURFACE PROPERTIES; TITANIUM;

EID: 0031994787     PISSN: 01415387     EISSN: None     Source Type: Journal    
DOI: 10.1093/ejo/20.1.79     Document Type: Article

References (37)

1. Andreasen G F, Brady P R 1972 A use hypothesis for 55 nitinol wire for orthodontics. Angle Orthodontist 42: 172-177
2. Bennett H E, Porteus J O 1961 Relation between surface roughness and specular reflectance at normal incidence. Journal of the Optical Society of America 51: 123-129
3. Bennett J M 1976 Measurement of the rms roughness, autocovariance function and other statistical properties of optical surfaces using a FECO scanning interferometer. Applied Optics 15: 2705-2721
4. Binnig G, Rohrer H, Gerber C, Weibel E 1982 Tunneling through a controllable vacuum gap. Applied Physics Letters 40: 178-186
5. Binnig G, Quate C F, Gerber C, 1986 Atomic force microscope. Physical Review Letters 56: 930-933
6. Buckthal J E, Kusy R P 1988 Effects of cold disinfectants on the mechanical properties and the surface topography of nickel-titanium archwires. American Journal of Orthodontics and Dentofacial Orthopedics 94: 117-122
7. Buehler W J, Gilfrich J V, Wiley R C 1963 Effect of low-temperature phase changes on the mechanical properties of alloys near composition of TiNi. Journal of Applied Physics 34: 1475-1484
8. Crane R B 1970 Use of a laser-produced speckle pattern to determine surface roughness. Journal of the Optical Society of America 60: 1658-1663
9. Drescher D, Bourauel C, Schumacher H A 1989 Frictional forces between bracket and archwire. American Journal of Orthodontics and Dentofacial Orthopedics 96: 397-404
10. Elson J M, Bennett J M 1979 Relation between the angular dependence of scattering and the statistical properties of optical surfaces. Journal of the Optical Society of America 69: 31-47
11. Fujii H, Asakura T, Shindo Y 1976 Measurements of surface roughness properties by means of laser speckle techniques. Optics Communications 16: 68-72
12. Garner L D, Allai W W, Moore B K 1986 A comparison of frictional forces during simulated canine retraction of a continuous edgewise archwire. American Journal of Orthodontics and Dentofacial Orthopedics 90: 199-203
13. Hartel A, Bourauel C, Drescher D, Schmuth G P F 1992 Die Oberflächenrauheit orthodontischer Drähte - Eine laseroptische und profilometrische Untersuchung. Schweizer Monatsschrift für Zahnmedizin 102: 1195-1202
14. Haywood V B, Heymann H O, Kusy R P, Whitley J Q, Andreaus S B 1988 Polishing porcelain veneers: an SEM and specular reflectance analysis. Dental Materials 4: 116-121
15. Hensler D H 1972 Light scattering from fused polycrystalline aluminium oxide surfaces. Applied Optics 11: 2522-2528
16. Holzer J A, Sung C C 1976 Evaluation of the irradiance of reflected light from rough surfaces. Journal of Applied Physics 47: 3363-3364
17. Kappert H F, Jonas I, Liebermann M, Rakosi T 1988 Korrosionsverhalten verschiedener orthodontischer Drähte. Fortschritte der Kieferorthopädie 49: 358-367
18. Keith O, Kusy R P, Whitley J Q 1994 Zirconia brackets: an evaluation of morphology and coefficients of friction. American Journal of Orthodontics and Dentofacial Orthopedics 106: 605-614
19. Konishi R N, Whitley J Q, Kusy R P 1985 Surface roughness of a dental amalgam via a laser scattering test. Dental Materials 1: 55-57
20. Kuk Y, Siverman P J 1989 Scanning tunneling microscope instrumentation. Review of Scientific Instrumentation 60: 165-180
21. Kusy R P. Whitley J Q 1985 In situ replication techniques: II. Quantitative methodologies for replicate materials. Journal of Biomedical Materials Research 19: 35-55
22. Kusy R P, Whitley J Q 1989 Effects of sliding velocity on the coefficients of friction in a model orthodontic system. Dental Materials 5: 235-240
23. Kusy R P, Whitley J Q, Mayhew M J, Buckthal J E 1988 Surface roughness of orthodontic archwires via laser spectroscopy. Angle Orthodontist 58: 33-45
24. Kusy R P, Whitley J Q, Prewitt M J 1991 Comparison of the frictional coefficients for selected archwire-bracket slot combinations in the dry and wet states. Angle Orthodontist 61: 293-302
25. Léger D, Mathieu E, Perrin J C 1975 Optical surface roughness determination using speckle correlation technique. Applied Optics 14: 872-877
26. Mayhew M J, Kusy R P 1988 Effects of sterilization on the mechanical properties and the surface topography of nickel-titanium archwires. American Journal of Orthodontics and Dentofacial Orthopedics 93: 232-246
27. Miura F, Mogi M, Ohura Y, Karibe M 1986 The superelastic property of the Japanese NiTi alloy wire for use in orthodontics. American Journal of Orthodontics and Dentofacial Orthopedics 90: 1-10
28. Peterson L, Spencer R, Andreasen G F 1982 A comparison of friction resistance for nitinol and stainless steel wire in edgewise brackets. Quintessence International 13: 563-571
29. Sprague R A 1972 Surface roughness measurements using white light speckle. Applied Optics 11: 2811-2816
30. Tanner L H 1976 The use of laser light in the study of metal surfaces. Optics and Laser Technology 8: 113-116
31. Tanner L H 1979 A comparison between Talysurf 10 and optical measurements of roughness and surface slope. Wear 57: 81-91
32. Tanner L H, Fahoum M 1976 A study of the surface parameters of ground and lapped metal surfaces, using specular and diffuse reflection of laser light. Wear 36: 299-316
33. Vedam K, So S S 1972 Characterisation of real surfaces by ellipsometry. Surface Science 29: 379-395
34. Vidosic J P 1964 Metal machining and forming technology. Ronald Press, New York
35. Vorburger T V, Teague E C 1981 Optical techniques for on-line measurement of surface topography. Precision Engineering 3: 61-83
36. Whitley J Q, Kusy R P, Mayhew M J, Buckthal J E 1987 Surface roughness of stainless steel and electroformed nickel standards using a HeNe laser. Optics and Laser Technology 19: 189-196
37. Wickramasinghe H K 1990 Scanning probe microscopy: current status and future trends. Journal of Vacuum Science and Technology A8: 363-368