Modeling mean flow and turbulence characteristics in gas-agitated bath with top layer

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 29, Issue 1, 1998, Pages 211-222

  Ilegbusi, Olusegun J ^a   Iguchi, Manabu ^a   Nakajima, Keiji ^a   Sano, Mitsuhiro ^a   Sakamoto, Mitsuru ^a  

^a NORTHEASTERN UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BUBBLES (IN FLUIDS); DENSITY (SPECIFIC GRAVITY); KINETIC ENERGY; MATHEMATICAL MODELS; MIXING; PARAFFINS; SILICON; SLAGS; STRESSES; TURBULENCE;

GAS-AGITATED WATER BATH; PENTANE;

STEELMAKING;

EID: 0031988386     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-998-0024-z     Document Type: Article

References (35)

1. 1. K. Mori M. Sano Y. Ozawa 1983 Tetsu-to-Hagané 69 1714 1714 1:CAS:528:DyaL2cXhtVGntQ%3D%3D K. Mori, M. Sano, and Y. Ozawa: Tetsu-to-Hagané, 1983, vol. 69, p. 1714.
2. 2. S.H. Kim R.J. Fruehan 1987 Metall. Trans. B 18B 381 90 1:CAS:528:DyaL2sXkt1Kmtrc%3D S.H. Kim and R.J. Fruehan: Metall. Trans. B, 1987, vol. 18B, pp. 381–90.
3. 3. M. Hirasawa K. Mori M. Sano A. Hatanaka Y. Shimatani Y. Okazaki 1987 Trans. Iron Steel Inst. Jpn. 27 277 277 1:CAS:528:DyaL2sXktFWjtbo%3D M. Hirasawa, K. Mori, M. Sano, A. Hatanaka, Y. Shimatani, and Y. Okazaki: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, p. 277.
4. 4. M. Hirasawa K. Mori M. Sano Y. Shimatani Y. Okazaki 1987 Trans. Iron Steel Inst. Jpn. 27 283 283 1:CAS:528:DyaL2sXitFOgur8%3D M. Hirasawa, K. Mori, M. Sano, Y. Shimatani, and Y. Okazaki: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, p. 283.
5. 5. J. Mietz S. Schneider F. Oeters 1991 Steel Res. 62 10 10 1:CAS:528:DyaK3MXos1WgtQ%3D%3D J. Mietz, S. Schneider, and F. Oeters: Steel Res., 1991, vol. 62, p. 10.
6. 6. G.G.K. Murthy S.P. Mehrotra 1992 Ironmaking and Steelmaking 19 377 377 1:CAS:528:DyaK3sXhsFWmtrY%3D G.G.K. Murthy and S.P. Mehrotra: Ironmaking and Steelmaking, 1992, vol. 19, p. 377.
7. 7. Y. Sahai G.R. St. Pierre 1992 Advances in Transport Processes in Metallurgical Systems Elsevier New York, NY Y. Sahai and G.R. St. Pierre: Advances in Transport Processes in Metallurgical Systems, Elsevier, New York, NY, 1992.
8. 8. F. Gerlach M.G. Frohberg 1993 Steel Res. 64 7 7 1:CAS:528:DyaK3sXosVyrsw%3D%3D F. Gerlach and M.G. Frohberg: Steel Res., 1993, vol. 64, p. 7.
9. 9. M. Iguchi Y. Sumida R. Okada Z. Morita 1994 Iron Steel Inst. Jpn. Int. 34 164 164 1:CAS:528:DyaK2cXisV2rurc%3D M. Iguchi, Y. Sumida, R. Okada, and Z. Morita: Iron Steel Inst. Jpn. Int., 1994, vol. 34, p. 164.
10. 10. Z. Lin R.I.L. Guthrie 1994 Metall. Mater. Trans. B 25B 855 64 1:CAS:528:DyaK2MXjtVOmtb8%3D Z. Lin and R.I.L. Guthrie: Metall. Mater. Trans. B, 1994, vol. 25B, pp. 855–64.
11. 11. H. Nakajima D. Mazumdar R.I.L. Guthrie 1987 Tetsu-to-Hagané 73 949 949 H. Nakajima, D. Mazumdar, and R.I.L. Guthrie: Tetsu-to-Hagané, 1987, vol. 73, p. S. 949
12. 12. H. Nakajima R.I.L. Guthrie 1987 Tetsu-to-Hagané 73 950 950 H. Nakajima and R.I.L. Guthrie: Tetsu-to-Hagané, 1987, vol. 73, p. 950.
13. 13. M. Iguchi O.J. Ilegbusi H. Ueda T. Kuranaga Z. Morita 1996 Metall. Mater. Trans. B 27B 35 41 1:CAS:528:DyaK28Xps1ejtQ%3D%3D M. Iguchi, O.J. Ilegbusi, H. Ueda, T. Kuranaga, and Z. Morita: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 35–41.
14. 14. J.H. Grevet J. Szekely N. El-Kaddah 1982 Int. J. Heat Mass Transfer 25 487 487 10.1016/0017-9310(82)90052-7 J.H. Grevet, J. Szekely, and N. El-Kaddah: Int. J. Heat Mass Transfer, 1982, vol. 25, p. 487.
15. 15. M. Salcudean K.Y.M. Lai R.I.L. Guthrie 1984 Can. J. Chem. Eng. 63 51 51 10.1002/cjce.5450630109 M. Salcudean, K.Y.M. Lai, and R.I.L. Guthrie: Can. J. Chem. Eng., 1984, vol. 63, p. 51.
16. 16. A.H. Castillejos J.K. Brimacombe 1986 SCANINJECT IV 4th Conf. on Injection Metallurgy MEFOS Lulea, Sweden A.H. Castillejos and J.K. Brimacombe: SCANINJECT IV, Part 1, No. 16, 4th Conf. on Injection Metallurgy, MEFOS, Lulea, Sweden, 1986, paper no. 16.1.
17. 17. J.S. Woo 1987 PhD Thesis Massachusetts Institute of Technology Cambridge, MA J.S. Woo: PhD Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1987.
18. 18. V. Sahajwalla J.K. Brimacombe M.E. Salcudean 1989 SCANINJECT V 5th Int. Symp. on Ladle Metallurgy MEFOS Lulea, Sweden 103 44 V. Sahajwalla, J.K. Brimacombe, and M.E. Salcudean: SCANINJECT V, Part II, 5th Int. Symp. on Ladle Metallurgy, MEFOS, Lulea, Sweden, 1989, pp. 103–44.
19. 19. M. Iguchi J. Tani T. Uemura H. Kawabata H. Takeuchi 1988 Tetsu-to-Hagané 74 1785 1785 1:CAS:528:DyaL1cXlsFahu7g%3D M. Iguchi, J. Tani, T. Uemura, H. Kawabata, and H. Takeuchi: Tetsu-to-Hagané, 1988, vol. 74, p. 1785.
20. 20. M. Iguchi H. Takeuchi Z. Morita 1990 Iron Steel Inst. Jpn. Int. 30 731 731 M. Iguchi, H. Takeuchi, and Z. Morita: Iron Steel Inst. Jpn. Int., 1990, vol. 30, p. 731.
21. 21. M.P. Schwartz J.K. Wright B.R. Baldock 1987 J. Szekely Proc. Symp. on Mathematical Modeling of Materials Processing Operations TMS Warrendale, PA 565 79 M.P. Schwartz, J.K. Wright, and B.R. Baldock: Proc. Symp. on Mathematical Modeling of Materials Processing Operations, J. Szekely, ed., Palm Springs, CA, 1987, TMS, Warrendale, PA, pp. 565–79.
22. 22. O.J. Ilegbusi J. Szekely 1990 Iron Steel Inst. Jpn. Int. 30 731 731 1:CAS:528:DyaK3cXmtleqt7o%3D O.J. Ilegbusi and J. Szekely: Iron Steel Inst. Jpn. Int., 1990, vol. 30, p. 731.
23. 23. O.J. Ilegbusi J. Szekely M. Iguchi H. Takeuchi Z. Morita 1993 Iron Steel Inst. Jpn. Int. 33 474 474 1:CAS:528:DyaK3sXltVSgu7Y%3D O.J. Ilegbusi, J. Szekely, M. Iguchi, H. Takeuchi, and Z. Morita: Iron Steel Inst. Jpn. Int., 1993, vol. 33, p. 474.
24. 24. J.T. Kuo G.B. Wallis 1988 Int. J. Multiphase Flow 14 545 545 10.1016/0301-9322(88)90057-2 J.T. Kuo and G.B. Wallis: Int. J. Multiphase Flow, 1988, vol. 14, p. 545.
25. 25. B.E. Launder D.B. Spalding 1972 Lectures in the Mathematical Models of Turbulence Academic Press London 169 169 B.E. Launder and D.B. Spalding: Lectures in the Mathematical Models of Turbulence, Academic Press, London, 1972, p. 169.
26. 26. M. Lopez Bertodano de S.J. Lee R.T. Lahey D.A. Drew 1990 ASME J. Fluids Eng. 112 107 107 10.1115/1.2909357 M. Lopez de Bertodano, S.J. Lee, R.T. Lahey, and D.A. Drew: ASME J. Fluids Eng., 1990, vol. 112, p. 107.
27. 27. H.F. Svendsen H.A. Jakobsen R. Torvik 1992 Chem. Eng. Sci. 47 3297 3304 10.1016/0009-2509(92)85038-D 1:CAS:528:DyaK38XlsFektrw%3D H.F. Svendsen, H.A. Jakobsen, and R. Torvik: Chem. Eng. Sci., 1992, vol. 47, pp. 3297–3304.
28. 28. R.T. Lahey M. Lopez Bertodano de O.C. Jones 1993 Nucl. Eng. Design 141 177 177 10.1016/0029-5493(93)90101-E 1:CAS:528:DyaK3sXkvFyqtro%3D R.T. Lahey, M. Lopez de Bertodano, and O.C. Jones: Nucl. Eng. Design, 1993, vol. 141, p. 177.
29. 29. S.T. Johansen F. Boysan 1988 Metall. Trans. B 19B 755 64 1:CAS:528:DyaL1cXlvFCmsrk%3D S.T. Johansen and F. Boysan: Metall. Trans. B, 1988, vol. 19B, pp. 755–64.
30. 30. J.L. Marie 1987 J. Multiphase Flow 113 309 25 10.1016/0301-9322(87)90051-6 J.L. Marie: J. Multiphase Flow, 1987, vol. 113, pp. 309–25.
31. 31. M. Lopez Bertodano de R.T. Lahey O.C. Jones 1994 Int. J. Multiphase Flow 20 805 18 10.1016/0301-9322(94)90095-7 M. Lopez de Bertodano, R.T. Lahey, and O.C. Jones: Int. J. Multiphase Flow, 1994, vol. 20, pp. 805–18.
32. 32. H.I. Rosten D.B. Spalding 1987 The PHOENICS Reference Manual CHAM Technical Report TR/200 CHAM Ltd. London H.I. Rosten and D.B. Spalding: The PHOENICS Reference Manual, CHAM Technical Report No. TR/200, CHAM Ltd., London, 1987.
33. 33. H.I. Rosten D.B. Spalding 1981 The Mathematical Basis of the PHOENICS-EARTH Computer Code CHAM Technical Report 58b CHAM Ltd. London H.I. Rosten and D.B. Spalding: The Mathematical Basis of the PHOENICS-EARTH Computer Code, CHAM Technical Report No. 58b, CHAM Ltd., London, 1981.
34. 34. W. Rodi 1980 Turbulence Models and Their Application in Hydraulics—A State of the Art Review IAHR Delft, The Netherlands W. Rodi: Turbulence Models and Their Application in Hydraulics—A State of the Art Review, IAHR, Delft, The Netherlands, 1980.
35. 35. K. Hanjalik B.E. Launder 1972 J. Fluid Mech. 52 609 609 10.1017/S002211207200268X K. Hanjalik and B.E. Launder: J. Fluid Mech., 1972, vol. 52, p. 609.