Concrete corrosion and control practices - An overview

Anti-Corrosion Methods and Materials

Volumn 45, Issue 1, 1998, Pages 5-15

  Pandey, Jyoti Lata ^a   Banerjee, M K ^b  

^a NATIONAL METALLURGICAL LABORATORY   (India)

^b NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

CONCRETE ADMIXTURES; CONCRETE CORROSION; EMBEDDED STEEL; REINFORCED STEELS;

CATHODIC PROTECTION; CONCRETE CONSTRUCTION; MIXTURES; REINFORCEMENT; STEEL; CONCRETE ADDITIVES; FAILURE ANALYSIS; REINFORCED CONCRETE;

CORROSION; STEEL CORROSION;

CONCRETE; CONTROL SYSTEM; CORROSION; STEEL; CATHODIC PROTECTION;

CONCRETE ADMIXTURES;

EID: 0031954413     PISSN: 00035599     EISSN: None     Source Type: Journal    
DOI: 10.1108/00035599810194132     Document Type: Review

References (53)

1. Ali, M.G., Rasheeduzzafar, Al-Saadoun, S.S. and Al-Gahtani, A.S. (1991), "The influence of Arabian gulf environment on the cathodic protection criteria for reinforced concrete structures", Fifth Middle East Corrosion Conference, Behrain, 28-30 October 1991, p. 417
2. Allan, M.L. and Cherry, B.W. (1990), "Failure mechanisms for corroding reinforced concrete", CASS 90' Conference, Corrosion-AIR, SEA, SOIL, Auckland, New Zealand, 19-23 November 1990, p. 3, (Paper No. 9).
3. Allan, M.L. and Cherry, B.W. (1991), "Failure mechanism for corroding reinforced concrete", Corrosion Australasia, Vol. 16 No. 3-4, p. 15.
4. Almusallam, A.A., Al-Gahtani, A.S. and Aziz, A.R. (1996), "Effect of reinforcement corrosion on bond strength", Construction and Building Materials, Vol. 10 No. 2, p. 123.
5. Andrade, C., Macias, A., Feliu, S., Escudero, M.L. and Gonzalez, J.A. (1990), "Quantitative measurement of the corrosion rate using a small counter electrode in the boundary of passive and corroded zones of a long concrete beam", Corrosion Rate of Steel in Concrete Conference, Baltimore, MD, 29 June 1990, p. 134.
6. Apostolos, J.A., Douglas, M.P. and Richard, A.C. (1987), "Cathodic protection of reinforced concrete using metallised zinc", Materials Performance, December 1987. p. 25.
7. Arya, C. and Vassie, P.R.W. (1995), "Influence of cathode-to-anode area ratio and separation distance of galvanic corrosion currents of steel in concrete containing chlorides", Cement and Concrete Research, Vol. 25 No. 5, p. 989.
8. Bartholomew, J.J. and Gilligen III, T.J. (1991), "Fibre-filled concrete overlay in cathodic protection", Patent: US 5200259 USA, 22 August.
9. Bennett, J. and Schue, T.J. (1993), " Evaluation of noncure process for electrochemical chloride removal from steel reinforced concrete bridge components", Government Research Announcement Index, p. 39, Report No. 94-104296/XAB.
10. Broomfield, J.P. (1995a), "Corrosion and residual life in concrete structures - an overview", Bull. Electrochem., Vol. 11 No. 3, p. 121.
11. Biezok, I. (1967), Concrete Corrosion Concrete Protection, Akademiai Kiado, Budapest.
12. Broomfield, J.P. (1995b), "Strategic highway research programme on corrosion of steel in concrete", Bull. Electrochem., Vol. 11 No. 4, p. 169.
13. Cherry, B.W. and Kashmirian, A.S. (1983), "Cathodic protection of steel embedded inporous concrete", British Corrosion Journal, Vol. 18 No. 4, p. 9.
14. Chung, H.W. (1991), "Repair strategy - a prognosis of repairing concrete structure damaged by steel corrosion", Australian Civil Engineering Transactions CE 33, No. 4, p. 243.
15. Das, S.C. (1993), "Cathodic protection of R. C. structures", Structural Engineers, Vol. 71 No. 22, p. 400.
16. de-Rincon, O.T., de Carrugo, A.R., Romero, D. and Cuica, E. (1992), "Evaluation of the oxidation products of aluminium sacrificial anodes in reinforced concrete structures", Corrosion, Vol. 48 No. 11, p. 960.
17. Escalante, E. and Ito, S. (1990), "Measuring the rate of corrosion of steel in concrete", Corrosion Rate of Steel in Concrete, Baltimore, MD, 29 June 1990, p. 86.
18. Flis, J., Pickering, H.W. and Osseo-Asare, K. (1995), "Assessment of data from three electrochemical instruments for evaluation of reinforcement corrosion rates in concrete bridge components", Corrosion, Vol. 51 No. 8, p. 602.
19. Fwa, T.F. and Paramasivam, P. (1987), "Properties of fibre reinforced concrete for rigid pavement", International Conference - Symposium on Fibre Reinforced Concrete, Vol. II, Madras, 16-19 December (Conference Paper 5.17-5.27).
20. Glass, O.K. (1996), "Analysis of data on a reinforced concrete cathodic protection system", Materials Performance, Vol. 35 No. 2, p. 36.
21. Gonzalez, J.A. and Andrade, C. (1982), " Effect of carbonation, chlorides and relative ambient humidity on the corrosion of galvanised rebars embedded in concrete", British Corrosion Journal, Vol. 17 No. 1, p. 21.
22. Gonzalez, J.A., Molina, A., Otero, E. and Lopez, W. (1990), "On the mechanism of steel corrosion in concrete: the role of oxygen diffusion", Magazine of Concrete Research, Vol. 42 No. 150, March, p. 23.
23. Green, W.K., Nahas, M.A. and Graphglia, J.P. (1995), "Long term performance of a conductive coating cathodic protection system on a reinforced concrete structure", Corrosion Australia, Vol. 20 No. 1.
24. Hara, N. and Hiramatsu, K. (1990), "The latest techniques in suppressing reinforced concrete deterioration", NTT Review, Vol. 2 No. 5, p. 92.
25. Hertlein, B.H. (1992), "Assessing the role of steel corrosion in the deterioration of concrete in the national infrastructure : a review of the causes of corrosion and current diagnostic techniques", Corrosion Forms and Control for Infrastructure, San Diego, CA, 3-4 June 1991, Publication ASTM, Race St., PA, p. 1916.
26. Hong, N. and He, M. (1991), "Experimental study of in situ measurements of reinforcement corrosion rate by non-destructive method", Corrosion Control 7th APCCC, Vol. 2, China, p. 1285.
27. John, G., Leppard, N.W., and Wyatt, B. (1992), "Repair and cathodic protection of corrosion damaged reinforced concrete wharves in Middle East", Corrosion Forms and Control for Infrastructure, San Diego, California, USA, 3-4, June 1991, Publication, ASTM, Race St. PA, p. 1916.
28. Keyyali, O.A. and Haque, M.N. (1995), "The Cl- exp-/OH-exp- ratio in chloride contaminated", Magazine of Concrete Research, Vol. 47 No. 172, September, p. 235.
29. Kranc, S.C. and Sagues, A.A. (1994), "Computation of reinforcing steel corrosion distribution in concrete marine bridge substructures", Corrosion, Vol. 50 No. 1, p. 50 (Conference paper Corrosion, 93, USA).
30. Kumar, K., Vedalakshmi, R., Rengaswamy, N.S. and Balakrishnan, K. (1995), "Evaluation of cathodic protection of steel in concrete using potential gradient approach", Transactions of the SAEST, Vol. 30 No. 4, p. 164.
31. Larsen, E. S., and Krenchel, H. (1990), "Durability of FRC-materials", Conf. Fibre-reinforced Cementitious Materials, Boston, MA, 26-28 November 1990, p. 119.
32. Lopez, W and Gonzalez, J. A. (1993), "Influence of the degree of pore saturation on the resistivity of concrete and the corrosive rate of steel reinforcement", Cement and Concrete Research, Vol. 23 No. 2, p. 368.
33. Macdonald, D.D., El-Tantawy, Y.A., Rocha-Filho, R.C. and Urquidi-Macdonald, M. (1991), "Evaluation of electrochemical impedance techniques for detecting corrosion on rebar in reinforced concrete", Government Research Announcement and Index, p. 97 Report No. PB 92-186519/XAB.
34. Maslehuddin, M., Al-Mana, A.I., Saricimen, H. and Shamin, M. (1991), "Studies on corrosion of reinforcement in concrete", Fifth Middle East Corrosion Conference, Behrain, 28-30 October 1991, p. 638.
35. Moskvin, V., Ivanov, F., Alekseyev, S. and Guzeyev, E. (1980), Concrete and Reinforced Concrete Deterioration and Protection, Moskvin, V. (Ed.), Mir Publishers, Moscow.
36. Mudd, C.J., Mussinelli, G.L., Tettamanti, M. and Pedeferri, P. (1988), "Cathodic protection of steel", Materials Performance, September, p. 18.
37. Ohama, Y. (1987), "Durability and long-term performance of FRC", International Symposium on Fibre Reinforced Concrete, Vol. II, Madras, 16-19 December 1987, (Conference Paper 5.3-5.16).
38. Pedeferri, P. (1996), "Cathodic protection and cathodic prevention", Construction and Building Materials, Vol. 10 No. 5, p. 391.
39. Pedeferri, P. and Tettamanti, M. (1991), "Long-term test on cathodic protection of steel in concrete with mixed metal oxides activated titanium anode net", Fifth Middle East Corrosion Conference, Behrain, 28-30 October, 1991, p. 272.
40. Polder, R.B., Walker, R.J. and Page, C.L. (1995), "Electrochemical desalination of cores from a reinforced concrete coastal structures", Magazine of Concrete Research, Vol. 47 No. 173, p. 321.
41. Raupach, M. (1996), "Chloride-induced macrocell corrosion of steel in concrete-theoretical background and practical consequences", Construction and Building Materials, Vol. 10 No. 5, p. 329.
42. Rodrique, P., Ramirez, E. and Bonzalez, J.A. (1994) "Method for studying corrosion in reinforced concrete", Concrete Research Magazine, Vol. 46 No. 167, p. 81.
43. Salparantra, L. (1990), "Epoxy coated concrete reinforcements", Corrosion of reinforcement in concrete, Wishaw, 21-24 May, 1990, p. 559.
44. Sanjurjo, A., Hettiaracheli, S., Lau, K.H., Cox. P. and Wood, B. (1992), "Coatings for corrosion protection of steel used in reinforced concrete", Surface and Coating Technology, Vol. 54-55 No. 1-3, November 1992, p. 224.
45. Sehgal, A., Kho, Y.T., Osseo-Asare and Pickering, H.W. (1972), "Comparison of corrosion rate-measuring devices for determining corrosion rate of steel in concrete systems", Corrosion, Vol. 48 No. 10, p. 871.
46. Solomon, I., Bird, M.F. and Phang, B. (1993), "An economic solution for the cathodic protection of concrete columns using a conductive tape system", Corrosion Science, Vol. 35 No. 5-8, p. 1649.
47. Swarup, J. and Trikha, D.N. (1996), "Corrosion of reinforcement in concrete structure under various conditions", Transactions of the Metals Finishers' Association of India, Vol. 5 No. 1, p. 15.
48. Thangavel, K. and Rengaswamy, N.S. (1986), "Environmental influence on the electrode potential of steel in concrete", Transactions of the Metal Finishers Association of India, Vol. 5 No. 1, p. 23.
49. Vasan, R.M., Tiwari, V.K., Kaushik, S.K. and Godbole, P.N. (1987), "Corrosion of steel fibres in steel fibre reinforced concrete", International Symposium on Fibre Reinforced Concrete, Vol. II, Madras, 16-19 December, (Conference Paper 5.39-5.47).
50. Webb, N. C. (1992), "Cathodic protection of reinforced concrete". Constructions and Building Materials, Vol. 6 No. 3, p. 179.
51. Wheat, H.G. (1990), "Corrosion rate determination on repaired reinforced concrete specimens", Corrosion Rate of Steel in Concrete, Baltimore, MD, 29 June 1990, p. 52.
52. Wire (1996), "Stainless reinforced concrete bars", Wire, Vol. 24 No. 4, August, (Germany), p. 260.
53. Wyatt, B.S. and Irvine, D.J. (1987), "A review of cathodic protection of reinforced concrete", Materials Performance, December, p. 13.