On adaptive remeshing techniques for crack simulation problems

Engineering Computations (Swansea, Wales)

Volumn 15, Issue 1, 1998, Pages 74-88

  Koenke, C ^a   Harte, R ^b   Kratzig W B ^a   Rosenstein, O ^c  

^a RUHR UNIVERSITY BOCHUM   (Germany)

^b Kraetzig and Partners Engineering Consultants   (Germany)

^c Philipp Holzmann AG   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

APPROXIMATION THEORY; BOUNDARY CONDITIONS; COMPUTER SIMULATION; CRACK PROPAGATION; ERROR ANALYSIS; FINITE ELEMENT METHOD; FRACTURE; INTERPOLATION; LEAST SQUARES APPROXIMATIONS; MATRIX ALGEBRA; PLASTIC DEFORMATION; PROBLEM SOLVING; STRESS CONCENTRATION; CRACKS;

ADAPTIVE REMESHING; DAMAGE EVOLUTION; MATERIAL ELEMENTS; STRUCTURAL DAMAGE; ADAPTIVE MESH REFINEMENT;

MATERIALS SCIENCE; FRACTURE;

EID: 0031678020     PISSN: 02644401     EISSN: None     Source Type: Journal    
DOI: 10.1108/02644409810200695     Document Type: Article

References (35)

1. Andersen, T.L. (1991), Fracture Mechanics, Fundamentals and Applications, CRC Press.
2. Babuska, I. and Miller, A. (1987), "A feedback finite element method with a-posteriori error estimates: Part L The finite element method and some properties of the a-posteriori estimator", Camp. Meth. Appl. Mech. Engng., Vol. 61.
3. Babuska, I. and Rheinboldt, W.C. (1978a), "A posteriori error estimates for the finite element method", International Journal of Numerical Methods in Engineering, Vol. 12, pp. 1597-1615.
4. Babuska, I. and Rheinboldt, W.C. (1978b), "Error estimates for adaptive finite element computations", SIAM J. Numer. Anal, Vol 15 No. 4, pp. 736-54.
5. Baehmann, P.L., Shephard, M.S. and Flaherty, J.E. (1992), "A posteriori error estimation for triangular and tetrahedral quadratic elements using interior residuals". International Journal of Numerical Methods in Engineering, Vol. 30, pp. 979-96.
6. Barsoum, R.S. (1977), "Triangular quarter-point elements as elastic and perfectly-plastic crack tip elements", International Journal of Numerical Methods in Engineering, Vol. 11, pp. 85-98.
7. Bathe, K.J. (1996), Finite Element Procedures, Prentice-Hall, Englewood Cliffs, NJ.
8. Broek, D. (1974), Elementary Engineering Fracture Mechanics, Nordhoff International Publishing.
9. De, J.P, Gago, S.R., Kelly, D.W., Zienkiewicz, O.C. and Babuska, I. (1983) "A posteriori error analysis and adaptive processes in the finite element method: Part II - adaptive mesh refinement", International Journal of Numerical Methods in Engineering, Vol 19, pp. 1621-56.
10. Feldmueller, A. (1991), "Ein thermoplastisches Stoffgesetz isotrop geschadigter Kontinua", Mitteilungen aus dem Institut fur Mechanik Nr. 75, Ruhr-Universität Bochum.
11. Graf, U. (1992), Bruchmechanische Kennwerte und Verfahren für die Ermüdungsfestigkeit geschweißter Aluminiumbauteile, Berichte aus dem Konstruktiven Ingenieurbau Technische Universität München 3/92.
12. Griffith, A.A. (1921), "The phenomenon of rupture and flow in solids". Philosophical Transactions, Royal Society, Vol. 221, pp. 163-98.
13. Heckel, K. (1983), Einfuhrung in die technische Anwendung der Bruchmechanik, Carl Hanser Verlag, Munchen.
14. Henshell, R.D. and Shaw, KG. (1975), "Crack tip finite elements are unnecessary", International Journal of Numerical Methods in Engineering, Vol. 9, pp. 495-507.
15. Hinton, E. and Campbell, J.S. (1974), "Local and global smoothing of discontinuous finite element functions using a least squares method", International Journal of Numerical Methods in Engineenng, Vol. 8, pp. 461-80.
16. Hutchinson, J. W. (1968), "Singular behaviour at the end of a tensile crack in a hardening material", Journal of the Mechanics and Physics of Solids, Vol. 16, pp. 13-31.
17. Inglis, C.E. (1913), "Stresses in a plate due to the presence of cracks and sharp corners", Proc. Institute Naval Architects.
18. Irwin, G.R. (1958), "Fracture", in Flügge, S. (Ed), Handbuch der Physik Vol VI, Springer, Berlin.
19. Kelly, D.W., De, J.P., Gago, S.R., Zienkiewicz, O.C. and Babuska, I. (1983), "A posteriori error analysis and adaptive processes in the finite element method: Part I - error analysis", International Journal of Numerical Methods in Engineering, Vol. 19, pp. 1593-1619.
20. Koenke, C. (1994), "Coupling of a micromechanically based void-growth model and a macro crack model for the simulation of damage evolution in ductile materials", IKIB Teckn.-wiss. Mitt. Nr. 94-4, Ruhr-Universität Bochum.
21. Kraetzig, W.B., Harte, R. and Meskouris, K. (1993), "Schwachstellen und restsicherheitsanalysen zur bewertung sowie zur ertüchtigung von ingenieurbauwerken", Bautechnik 70, Vol. 7, Ernst & Sohn, Berlin, pp. 392-401.
22. Kraetzig, W.B., Gruber, K., Meskouris, K. and Zahlten, W. (1994), "Computer-simulations of ultimate and serviceability states of reinforced concrete shells", in Mang, H. et al. (Eds), Proc. EURO-C 1994 International Conference, Vol. 2, Pineridge Press, Swansea, pp. 987-98.
23. Rashid, YR. (1968), "Ultimate strength analysis of prestressed concrete pressure vessels", Nuclear Engineering and Design, Vol. 7, pp. 334-44.
24. Rice, J.R. and Rosengren, G,F. (1968), "Plane strain deformation near a crack tip in a power-law hardening matnal", Journal of the Mechanics and Physics of Solids, Vol. 16, pp. 1-12.
25. Rolfe, S.T. and Barsom, J.M. (1987), Fracture and Fatigue Control in Structures, Applications of Fracture Mechanics, Prentice-Hall, Englewood Cliffs, NJ.
26. Rots, J.G. (1988), "Computational modeling of concrete fracture", PhD thesis, The Technical University of Delft.
27. Schieße, P. (1994), "Ein Beitrag zur Berechnung des Deformationsverhaltens anisotrop geschädigter Kontinua unter Berücksichtigung der thermoplastischen Kopplung", Mitteilungen aus dem Institut für Mechanik Nr. 89, Ruhr-Universitát Bochum.
28. Stein, E., Seifert, B. and Rust, W. (1994), "Adaptive Verfeinerung von Finite-Element-Netzen für Stabilitätsprobleme von Flächentragwerken", Forschungs- und Seminarberichte aus dem Bereich der Mechanik der Universitat Hannover Nr. F 94/1.
29. Swenson, D.V. (1985), "Modeling mixed-mode dynamic crack propagation using finite elements", PhD thesis, Cornell University, Ithaca, New York, NY.
30. Tvergaard, V. (1990a), "Material failure by void growth to coalescence", Advances in Applied Mechanics, Vol 27, pp. 83-151.
31. Tvergaard, V. (1990b), "Modelling of defect and fracture mechanics", IUTAM-CISM Summer School, Notes and Papers relating to the five lectures by V. Tvergaard.
32. Tvergaard, V. and Needleman, A. (1984), "Analysis of the cup-cone fracture in a round tensile bar", Acta Metallurgica, Vol. 32 No. 1, pp. 157-69.
33. Tvergaard, V, Needleman, A. and Lo, K.K. (1981), "Flow localization in the plane strain tensile test", Journal of the Mechanics and Physics of Solids, Vol 29 No. 2, pp. 115-42.
34. Verführt, R. (1995), "A posteriori error estimation and adaptive mesh-refinement techniques", Notes and Papers relating to the lectures by R Verführt.
35. Wawrzynek, P.A. and Ingraffea, A.R. (1991), Discrete Modeling of Crack Propagation. Theoretical Aspects and Implementation Issues in Two and Three Dimensions, Department of Structural Engineering, Report Number 91-5, Cornell University, Ithaca, New York, NY