Simplified Modelling of the Ballistic Behaviour of Fabrics and Fibre-Reinforced Polymeric Matrix Composites

Key Engineering Materials

Volumn 141-143, Issue , 1998, Pages 383-400

  Navarro, C ^a  

^a UNIVERSIDAD CARLOS III DE MADRID   (Spain)

Author keywords

Ballistics; Composites; Dynamic Behaviour; Fabrics; Fibres; Impact Load

Indexed keywords

ARMOR; BALLISTICS; FABRICS; FIBER REINFORCED PLASTICS; IMPACT TESTING; LOAD TESTING; MATHEMATICAL MODELS; PLASTIC LAMINATES; PROJECTILES;

LIGHT WEIGHT ARMORS;

NONMETALLIC MATRIX COMPOSITES;

EID: 0031674937     PISSN: 10139826     EISSN: 16629795     Source Type: Book Series    
DOI: None     Document Type: Article

References (63)

1. Zukas, Impact Dynamics, John Wiley & Sons (1982)
2. Abrate S., Appl. Mech. Rev., Vol. 44, April (1991)
3. Cantwell W.J. and Morton J., Composites, Vol. 22 No. 5 September (1991)
4. Montgomery T.G. et al., Text. Res. J., 52, (1982), pp. 442-450
5. Leech C.M. and B.A. Adeyefa, Comp. Struct., 15, (1982), pp. 423-432
6. Laible R. C., Fibrous Armour in Ballistic Materials and Penetration Mechanics, Ed.: R. C. Laible, Elsevier, New York, U.S.A., (1980), pp. 73-115
7. Mehlman and Vasudev, SAMPE Quarterly, Vol. 18, No. 4 (1987), pp. 43-48
8. Hartman, 41st Annual Conf. Reinforced Plastic/Composite Inst. (1986), pp. 1-5
9. Bhatnagar, Lin and Chang, 22nd Int. SAMPE Tech. Conf. (1990), pp.1-13
10. Hsieh et al., 22nd Int. SAMPE Tech. Conf. (1990), pp.14-27
11. Cunniff et al., 21nd Int. SAMPE Tech. Conf. (1990), pp.840-851
12. Wilkins M.L., Int. J. Engng. Sci., 16, (1978), pp. 793-807
13. Mayseless, M. et al., J. Appl. Mech., Vol. 54 (1987)
14. Smith, J.C., Blansford, J.M., Schiefer, H.F., Textile Research J., 30, No. 10, (1960)
15. Petterson, D.R. et al. Textile Research J., 30, No. 6, (1960)
16. Lyons, W.J., Impact phenomena in textiles, Cambridge, Mass., M.I.T. Press, (1963)
17. Maheux, C.R., Patterson, D.R., and Hamburger, T., Army Chemical Center Report CWLR 2141, (1957)
18. Anonymous, Quarterly Report No. 6 on Ballistic Protective Buoyant Material, Mellon Institute, Research Project 388-2, (1961)
19. Laible, R.C., and Henry, M.C., US Army Natick Laboratories Technical Report 70-32-CE, (1969)
20. Wilde, A.F., Roylance, D.K., and Rogers, J.M., Textil Research Journal, (1973)
21. Wilde, A.F., Textile Research Journal, (1974)
22. Ballisics Technology of Lightweight Armor, AMMRC TR 73-47, US Army Materials and Mechanics Research Command, Watertown, MA, (1979)
23. Prosser, R.A., Textile Research Journal, (1988)
24. Roylance D., Textile Research Journal, Vol. 47, (1977)
25. Roylance D. and Wang W.W., Polymer Engng. Sci., Vol. 28, (1978)
26. Roylance D., Wilde A. and Tocci G., Textile Research Journal, January (1973)
27. Roylance D. and Wang S-S., Fibre Science and Technology 14, (1981)
28. Greszczuk, L. B. Chapter 3 of Impact Dynamics, John Wiley & Sons, Inc., (1982)
29. Shivakumar, K.N., Elber, W., Illg, W., J. Appl. Mech., Vol. 52, (1985)
30. Hong, S., Liu, D., Exp. Mech., Vol. 29, (1989)
31. Sjöblom, P., Hartness, J., Cordell, T. M., J. Comp. Mat., Vol. 22, (1988)
32. van Gorp et al., Proc. Ballistics 93 (1993)
33. Harding J., Lecture for Short Course on Structural Impact, Oxford Univ., (1992)
34. Newill J. and Vinson J, Proc. ICCM-9, Madrid, Spain, (1993)
35. Staab G.H. and Gilat A., J. Composite Materials, Vol. 29, No. 10, (1995)
36. Rodriguez J., et al., Composites: Part B, 27B, (1996) pp. 147-154
37. Chocron I.S.et al., Int. J. Impact Engng. 19 (1997) pp.135-146
38. Cristescu, N., Malvern, L.E., Sierakowski, R.L., ASTM STP 568, (1975)
39. Cantwell, W.J. and Morton, J. Composites, Vol. 20, (1989)
40. Takeda, N., Sierakowski, R.L, Malvern, L.E., Comp. Tech. Rev., Vol. 4, (1982)
41. Takeda, N., Sierakowski, R.L, Malvern, L.E., J. Materials, Vol. 19, (1987)
42. Takeda, N. et al., Exp. Mech., Vol. 22, (1982)
43. Takeda, N., Sierakowski, R.L, Malvern, L.E., J. Comp. Mater., Vol. 15, (1981)
44. Joshi, S.P., Sun, C.T., J. Comp. Mat., Vol. 19, (1985)
45. Liu, D., Malvern, L.E., J. Comp. Mater., Vol. 21, (1987)
46. Zhu, G., Goldsmith, W., Dharan, C.K.H., Parts I and II, Int. J. Solids Structures, Vol. 29, (1992)
47. Dupont Co., A guide to designing and preparing Ballistic Protection of Kevlar, (1983)
48. Morrison C. and Bader M.G., First ECCM, (1985)
49. Bless and Hartman, 21st Int. SAMPE Technical Conf. (1989), pp. 852 to 866
50. Beaumont and Penazzi, Inst. Phys. Conf., oxford. (1989), pp. 411-418
51. Ajax, Eric, PhD. Thesis. ENSAM. Bordeaux. (1993)
52. Navarro C. et al., Proc, SUSI'94, Comp. Mech. Publ. (1994)
53. Navarro C., Rodríguez J. and Cortés R., Journal de Physique IV, (1994)
54. Roylance, D., Fibre Science and Technology, Vol. 13, (1980)
55. Zhurkov, S.N., Int. J. Fracture Mech., Vol. 1, (1965)
56. Parga, B., Hernández, F., Int. J. Impact Engng., Vol. 16 (1995) pp 455-466
57. Chocron, I.S., PhD Thesis. UPM, (1996).
58. Hetherington, J.G., Rajagopalan, B.P., Int. J. Impact Engng. Vol. 11, (1991)
59. Florence, A. L., Interaction of Projectiles and Composite Plate II, Stanford Research Ins., AMMRG-CR-69-15, (1969)
60. Navarro, C.,et al., Int. J. Impact Engng., Vol.13, (1993)
61. Woodward, R., Int, J. Impact Engng., Vol. 9, (1990)
62. Reijer, P.C. den, PhD Thesis, Delft Univ. of Technology, The Netherlands, (1991)
63. Rodriguez, J., Personal communication.