Formation and dissolution of phase-separated structures in ultrathin blend films

Journal of Polymer Science, Part B: Polymer Physics

Volumn 36, Issue 1, 1998, Pages 191-200

  Ermi, Brett D ^a   Karim, Alamgir ^a   Douglas, Jack F ^a  

^a NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

Author keywords

Atomic force microscopy; Phase separation; Polymer blends; Ultrathin films

Indexed keywords

ATOMIC FORCE MICROSCOPY; COMPOSITION EFFECTS; DISSOLUTION; MORPHOLOGY; PHASE SEPARATION; POLYETHERS; POLYMER BLENDS; POLYSTYRENES; ULTRATHIN FILMS;

POLYVINYLMETHYLETHER;

PLASTIC FILMS;

EID: 0031674920     PISSN: 08876266     EISSN: None     Source Type: Journal    
DOI: 10.1002/(SICI)1099-0488(19980115)36:1<191::AID-POLB21>3.0.CO;2-6     Document Type: Article

References (44)

1. S. Reich and Y. Cohen, J. Polym. Sci., Polym. Phys. Ed., 19, 1255 (1981).
2. W. J. Orts, J. H. van Zanten, W. L. Wu, and S. K. Satija, Phys. Rev. Lett., 71, 867 (1993); J. L. Keddie, R. A. L. Jones, and R. A. Cory, Europhys. Lett. 27, 59 (1994).
3. W. J. Orts, J. H. van Zanten, W. L. Wu, and S. K. Satija, Phys. Rev. Lett., 71, 867 (1993); J. L. Keddie, R. A. L. Jones, and R. A. Cory, Europhys. Lett. 27, 59 (1994).
4. R. C. Ball and R. L. H. Essery, J. Phys.: Cond. Mater., 2, 10303 (1990); S. Puri and K. Binder, Phys. Rev. E, 49, 5359 (1994).
5. R. C. Ball and R. L. H. Essery, J. Phys.: Cond. Mater., 2, 10303 (1990); S. Puri and K. Binder, Phys. Rev. E, 49, 5359 (1994).
6. R. A. L. Jones, L. J. Norton, E. J. Kramer, F. S. Bates, and P. Wiltzius, Phys. Rev. Lett., 66, 1326 (1991); G. Krausch, C. A. Dai, E. J. Kramer, and F. S. Bates, Ber. Bungsm-Ges. Phys. Chem., 98, 446 (1994); G. Krausch, C. A. Dai, E. J. Kramer, J. F. Marko, and F. S. Bates, Macromolecules, 26, 5566 (1993).
7. R. A. L. Jones, L. J. Norton, E. J. Kramer, F. S. Bates, and P. Wiltzius, Phys. Rev. Lett., 66, 1326 (1991); G. Krausch, C. A. Dai, E. J. Kramer, and F. S. Bates, Ber. Bungsm-Ges. Phys. Chem., 98, 446 (1994); G. Krausch, C. A. Dai, E. J. Kramer, J. F. Marko, and F. S. Bates, Macromolecules, 26, 5566 (1993).
8. R. A. L. Jones, L. J. Norton, E. J. Kramer, F. S. Bates, and P. Wiltzius, Phys. Rev. Lett., 66, 1326 (1991); G. Krausch, C. A. Dai, E. J. Kramer, and F. S. Bates, Ber. Bungsm-Ges. Phys. Chem., 98, 446 (1994); G. Krausch, C. A. Dai, E. J. Kramer, J. F. Marko, and F. S. Bates, Macromolecules, 26, 5566 (1993).
9. L. Sung, A. Karim, J. F. Douglas, and C. C. Han, Phys. Rev. Lett. 76, 4368 (1996). Suppression of surface-directed spinodal decomposition in blend films occurs for thicknesses less than 2000 A. For lateral phase separation to occur in ultrathin films, it is also necessary for one of the blend components to enrich both the polymer-solid and the polymerair interface ("symmetric film"). The critical temperature and composition can also shift in ultrathin films. The present studies were performed at temperatures well within the one- and two-phase regions. Shifts in the phase boundary do not affect the qualitative aspects of our study.
10. A. Karim, J. F. Douglas, L. Sung and B. Ermi, Phys. News in 1996, Am. Inst. Phys., College Park, MD, p. 70; Amer. Phys. Soc. News 6, 25 (1997).
11. A. Karim, J. F. Douglas, L. Sung and B. Ermi, Phys. News in 1996, Am. Inst. Phys., College Park, MD, p. 70; Amer. Phys. Soc. News 6, 25 (1997).
12. A. M. Mayes and S. K. Kumar, MRS Bull., 22, 43 (1997).
13. T. M. Slawecki, Ph.D. Thesis, Pennsylvania State University, 1995. Transient lateral phase separation was also observed by F. Bruder and R. Brenn [Phys. Rev. Lett., 69, 624 (1992)] after the system initially underwent surface-directed type phase separation.
14. T. M. Slawecki, Ph.D. Thesis, Pennsylvania State University, 1995. Transient lateral phase separation was also observed by F. Bruder and R. Brenn [Phys. Rev. Lett., 69, 624 (1992)] after the system initially underwent surface-directed type phase separation.
15. A. Karim, S. K. Satija, C. C. Han, T. M. Slawecki, S. K. Kumar, and T. P. Russell, ACS PMSE Polym. Prep., 71, 280 (1994).
16. A. Karim, T. M. Slawecki, S. K. Kumar, J. F. Douglas, C. C. Han, T. P. Russell, Y. Liu, and M. Rafailovich, Macromolecules, to appear.
17. S. Affrossman, G. Henn, S.A. O'Neill, R. A. Pethrick, and M. Stamm, Macromolecules, 29, 5010 (1996).
18. K. Dalnoki-Veress, J. A. Forrest, J. R. Stevens, and J. R. Dutcher, J. Polym. Sci., Polym. Phys. Ed., 34, 3017 (1996).
19. P. Keblinski, S. K. Kumar, A. Maritan, J. Koplik, and J. R. Banavar, Phys. Rev. Lett., 76, 4368 (1996).
20. M. F. Schatz, S. J. Van Hook, W. D. McCormick, J. B. Swift, and H. L. Sweeny, Phys. Rev. Lett., 75, 1938 (1995); H. F. Davis, Annu. Rev. Fl. Mech., 19, 403 (1987). For fluid films heated from below, pattern formation arises from the surface tension variation. This phenomenon is similar to surface patterning in phase-separating blends, although the physical origin of the surface tension variations is different.
21. M. F. Schatz, S. J. Van Hook, W. D. McCormick, J. B. Swift, and H. L. Sweeny, Phys. Rev. Lett., 75, 1938 (1995); H. F. Davis, Annu. Rev. Fl. Mech., 19, 403 (1987). For fluid films heated from below, pattern formation arises from the surface tension variation. This phenomenon is similar to surface patterning in phase-separating blends, although the physical origin of the surface tension variations is different.
22. A. Z. Akcasu, I. Bahar, B. Erman, Y. Feng, and C. C. Han, J. Chem. Phys., 97, 5782 (1992).
23. J. M. Deutch, B. U. Felderhof, and M. J. Saxton, J. Chem. Phys., 64, 4559 (1976).
24. v, and it would be called the "Number-Average Relative Molecular Mass." The conventional notation, rather than the ISO notation, has been employed for this publication.
25. C. C. Han, B. J. Bauer, J. C. Clark, Y. Muroga, Y. Matsushita, M. Okada, Q. Tran-Cong, T. Chang, and I. Sanchez, Polymer, 29, 2002 (1988).
26. Certain commercial material and equipment are identified in this publication to adequately specify the experimental procedure. In no case does such identification imply recommendation by the National Institute of Standards and Technology nor does it imply that the material or equipment identified is necessarily the best available for this purpose.
27. Y. Wu, F. J. Alexander, T. Lookman, and S. Chen, Phys. Rev. Lett., 74, 3852 (1995).
28. E. D. Siggia, Phys. Rev. A, 20, 595 (1979); L. P. McMaster, Adv. Chem. Ser., 142, 43 (1975). The breakup of the bicontinuous structure into droplets is a hydrodynamic instability, which dominates the late stages of phase separation.
29. E. D. Siggia, Phys. Rev. A, 20, 595 (1979); L. P. McMaster, Adv. Chem. Ser., 142, 43 (1975). The breakup of the bicontinuous structure into droplets is a hydrodynamic instability, which dominates the late stages of phase separation.
30. G. T. Dee and B. B. Sauer, Macromolecules, 22, 2581 (1989).
31. B. D. Ermi, A. Karim, J. F. Douglas, and L. P. Sung, ACS PMSE Poly. Prep., 77, 606 (1997).
32. I. M. Lifshitz and V. V. Slyozov, J. Phys. Chem. Solids, 19, 35 (1961); A. Z. Akcasu and R. Klein, Macromolecules, 26, 1429 (1993); H. Sato, N. Kuwahara, and K. Kubota, Phys. Rev. E, 50, R1752 (1994).
33. I. M. Lifshitz and V. V. Slyozov, J. Phys. Chem. Solids, 19, 35 (1961); A. Z. Akcasu and R. Klein, Macromolecules, 26, 1429 (1993); H. Sato, N. Kuwahara, and K. Kubota, Phys. Rev. E, 50, R1752 (1994).
34. I. M. Lifshitz and V. V. Slyozov, J. Phys. Chem. Solids, 19, 35 (1961); A. Z. Akcasu and R. Klein, Macromolecules, 26, 1429 (1993); H. Sato, N. Kuwahara, and K. Kubota, Phys. Rev. E, 50, R1752 (1994).
35. G. Coulon, B. Collin, D. Ausserré, D. Chatenay, J. Physiol. (Paris), 51, 2571 (1990); G. Coulon, B. Collin, D. Ausserré, D. Chatenay, and T. P. Russell, J. Physiol. (Paris), 51, 2801 (1990); G. Coulon, D. Ausserré, and T. P. Russell, J. Physiol. (Paris), 51, 7777 (1990). Transient mound structures have been observed in polymer bilayers prepared under non-equilibrium conditions, see U. Steiner, J. Klein, and L. J. Fetters, Phys. Rev. Lett., 72, 1498 (1994).
36. G. Coulon, B. Collin, D. Ausserré, D. Chatenay, J. Physiol. (Paris), 51, 2571 (1990); G. Coulon, B. Collin, D. Ausserré, D. Chatenay, and T. P. Russell, J. Physiol. (Paris), 51, 2801 (1990); G. Coulon, D. Ausserré, and T. P. Russell, J. Physiol. (Paris), 51, 7777 (1990). Transient mound structures have been observed in polymer bilayers prepared under non-equilibrium conditions, see U. Steiner, J. Klein, and L. J. Fetters, Phys. Rev. Lett., 72, 1498 (1994).
37. G. Coulon, B. Collin, D. Ausserré, D. Chatenay, J. Physiol. (Paris), 51, 2571 (1990); G. Coulon, B. Collin, D. Ausserré, D. Chatenay, and T. P. Russell, J. Physiol. (Paris), 51, 2801 (1990); G. Coulon, D. Ausserré, and T. P. Russell, J. Physiol. (Paris), 51, 7777 (1990). Transient mound structures have been observed in polymer bilayers prepared under non-equilibrium conditions, see U. Steiner, J. Klein, and L. J. Fetters, Phys. Rev. Lett., 72, 1498 (1994).
38. G. Coulon, B. Collin, D. Ausserré, D. Chatenay, J. Physiol. (Paris), 51, 2571 (1990); G. Coulon, B. Collin, D. Ausserré, D. Chatenay, and T. P. Russell, J. Physiol. (Paris), 51, 2801 (1990); G. Coulon, D. Ausserré, and T. P. Russell, J. Physiol. (Paris), 51, 7777 (1990). Transient mound structures have been observed in polymer bilayers prepared under non-equilibrium conditions, see U. Steiner, J. Klein, and L. J. Fetters, Phys. Rev. Lett., 72, 1498 (1994).
39. G. Reiter, Phys. Rev. Lett. 68, 75 (1992); G. Reiter, Langmuir, 9, 1344 (1993).
40. G. Reiter, Phys. Rev. Lett. 68, 75 (1992); G. Reiter, Langmuir, 9, 1344 (1993).
41. A. Faldi, R. J. Composto, and K. I. Winey, Longmuir, 11, 4855 (1995).
42. B. D. Ermi, A. Karim, and J. F. Douglas, in preparation.
43. L. O. Kornum and K. K. Raaschou Nielsen, Prog. Org. Coat., 8, 273 (1980).
44. A. Karim, J. F. Douglas, J. A. Rogers, R. J. Jackson, E. J. Amis, and G. M. Whitesides, submitted.