Microstructural investigation of a rapidly solidified 12Cr-Mo-V steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 29, Issue 1, 1998, Pages 367-376

  Pryds, N H ^a   Johnson, E ^b   Linderoth, S ^a   Pedersen, A S ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^b UNIVERSITY OF COPENHAGEN   (Denmark)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE; CHROMIUM ALLOYS; COOLING; CRYSTAL ORIENTATION; FERRITE; GRAIN SIZE AND SHAPE; METALLOGRAPHIC MICROSTRUCTURE; PHASE INTERFACES; SOLIDIFICATION; TRANSMISSION ELECTRON MICROSCOPY;

MELT SPINNING;

STAINLESS STEEL;

EID: 0031673702     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-998-0188-9     Document Type: Article

References (38)

1. K.J. Irvine, D.J. Crowe, and F.B. Pickering: J. Iron Steel Inst., 1960, vol. 195, pp. 386-405.
2. R. Blum, J. Hald, W. Bendick, A. Rosselet, and J.C. Vaillant: Int. VGB Conf. on Fossil-Fired Power Plants with Advanced Design Parameters, Kolding, Denmark, 1993.
3. R. Petri and P. Schwaab: Arch. Eisenhüttenwes., 1981, vol. 52, pp. 27-32.
4. W. Bendick, K. Haarmann, G. Wellnitz, and M. Zshau: VGB Kraftwerkstechnik, 1993, vol. 73, pp. 73-79.
5. D.J. Gooch: Met. Sci., 1982, vol. 16, pp. 79-89.
6. E.A. Little, D.R. Harnes, F.B. Pickering, and S.K. Keown: Met. Technol., 1977, vol. 4, pp. 205-17.
7. .D.R. Barraclough and D.J. Gooch: Mater. Sci. Technol., 1985, vol. 1, pp. 961-67.
8. F.B. Pickering: Int. Met. Rev., 1976, vol. 21, pp. 227-68.
9. J.M. Vitek and R.L. Klueh: Metall. Trans. A, 1983, vol. 14A, pp. 1047-55.
10. J.V. Bee and J.V. Wood: Met. Sci., 1982, vol. 16, pp. 268-74.
11. J.V. Wood and J.V. Bee: Proc. 4th Int. Conf. on Rapidly Quenched Metals, Jpn. Inst. of Met., Sendai, Japan, 1981, pp. 1509-14.
12. E. Johnson, L. Grabask, A. Johansen, L.S. Kristensen, and J.V. Wood: Mater. Sci. Eng., 1988, vol. 98, pp. 301-03.
13. R. Trivedi and W. Kurz: Acta Metall, 1986, vol. 34, pp. 1663-70.
14. D.M. Herlach: Mater. Sci. Eng. R, 1994, vol. 12, pp. 177-272.
15. H.H. Libermann and R.L. Bye: in Rapidly Solidified Crystalline Alloys, S.K. Das, B.H. Kear, and C.M. Adam, eds., TMS-AIME, Morristown, NJ, 1985, pp. 61-76.
16. M.C. Flemings and Y. Shiohara: Mater. Sci. Eng., 1984, vol. 65, pp. 157-70.
17. J.H. Perepezko and I.E. Anderson: in Synthesis and Properties of Metastable Phases, E.S. Machlin and T.J. Rowland, eds., TMS-AIME, Warrendale, PA, 1980, pp. 31-63.
18. C.F. Jatczak, J.A. Larson, and S.W. Shine: Retained Austenite and Its Measurements by X-Ray Diffraction, Society of Automotive Engineers, Warrendale, PA, 1980, pp. 1-55.
19. D. Juul Jensen and J.K. Kjems: Text. Microstr., 1983, vol. 5, pp. 239-51.
20. H.J. Bunge: Mathematische Methoden der Texturanalyse, Akademie-Verlag, Berlin, 1969.
21. G. Barton, M. Diefenbach, and J. Betz: in Rapidly Quenched Metals, S. Steeb and H. Warlimont, eds., Elsevier, Amsterdam, 1985, pp. 855-58.
22. A. Remy, A. Oueldennaoua, M. Foos, and C. Frantz: in Rapidly Quenched Metals, S. Steeb and H. Warlimont, eds., Elsevier, Amsterdam, 1985, pp. 843-46.
23. J.H. Vincent, J.G. Herbertson, and H.A. Davies: J. Mater. Sci. Lett., 1983, vol. 2, pp. 88-90.
24. N.H. Pryds: Riso National Laboratory, Roskilde, Denmark, unpublished research, 1996.
25. L.H. Schwartz: Int. J. Nondestr. Test., 1970, vol. 1, pp. 353-81.
26. W. Pitsch: Phil. Mag., 1959, vol. 4, pp. 577-84.
27. W.J. Bottinger and J.H. Perepezko: in Rapidly Solidified Crystalline Alloys, S.K. Das, B.H. Kear, and C.M. Adam, eds., TMS-AIME, Morristown, NJ, 1985, pp. 21-58.
28. C. Hayzelden, J.J. Rayment, and B. Cantor: Acta Metall., 1983, vol. 31, pp. 379-86.
29. B. Sundman, B. Jansson, and J.-O. Andersson: Calphad, 1985, vol. 9, pp. 153-90.
30. M. Hatherley and W.B. Hutchinson: An Introduction to Textures in Metals, The Institution of Metallurgists, Chameleom Press Ltd., London, Monograph No. 5.
31. L. Gråbæk, E. Johnson, and J.V. Wood: Metall. Trans. A, 1989, vol. 20, pp. 2259-66.
32. A. Ludwig, G. Frommeyer, and L. Gránásy: Mater. Sci. Eng. A, 1991, vol. 133, pp. 722-25.
33. H. Jones: Mater. Sci. Eng., 1984, vol. 65, pp. 145-56.
34. B. Cantor: in Science and Technology of the Undercooled Melt, P.R. Sahm, H. Jones, and C.M. Adam, eds., Martinus Nijhoff (NATO ASI Series), Theuern, Germany, 1986, pp. 3-27.
35. A.L. Greer: Mater. Sci. Eng. A, 1991, vol. 133, pp. 16-21.
36. T.A. Chernyshova and T.V. Lyulkina: J. Mater. Sci., 1992, vol. 27, pp. 580-86.
37. A. Kell and G.W. Groves: Crystallography and Crystal Defect, Logman, London, 1970, pp. 328-32.
38. B.V. Narasimha Rao: Metall. Trans. A, 1979, vol. 10A, pp. 645-48.