Material Design Approaches for Improving Impact Resistance of Composites

Key Engineering Materials

Volumn 141-143, Issue , 1998, Pages 169-186

  Zhong, W ^a   Jang, B Z ^a  

^a BEIHANG UNIVERSITY   (China)

Author keywords

3D Reinforcements; Controlled Interlaminar Phase; Impact Resistance; Modified Thermosets

Indexed keywords

CHEMICAL MODIFICATION; COMPOSITION EFFECTS; DELAMINATION; ENERGY DISSIPATION; FAILURE ANALYSIS; FRACTURE MECHANICS; FRACTURE TOUGHNESS; IMPACT RESISTANCE; PLASTIC LAMINATES; REINFORCEMENT; THERMOSETS; TOUGHENING;

CONTROLLED INTERLAMINAR PHASE (CIP); INTERLEAVING;

FIBER REINFORCED PLASTICS;

EID: 0031649602     PISSN: 10139826     EISSN: 16629795     Source Type: Book Series    
DOI: None     Document Type: Article

References (83)

1. P. W. R. Beaumont, P. G. Riewald, and C. Zweben, "Methods for Improving the Impact Resistance of Composite Materials", in Ref. 1, pp. 134-158.
2. W. Elber, "The Effect of Matrix and Fiber Properties on Impact Resistance", in Tough Composite Materials, NASA Conf. Pub. 2334, Hampton, Va., 1984, pp. 99-121.
3. J. G. Williams and M. D. Rhodes, "Effects of Resin on Impact Damage Tolerance of Graphite/Epoxy Laminates", ASTM STP 787, 450 (1982).
4. S. J. Bless, D. R. Hartman and S. J. Hanchak, "Ballistic Performance of Thick S-2 Glass Composites," Symp. on Comp. Materials in Armament Appl., 20-22 August 1985, UDR-TR-85-88A, 1985.
5. L. T. Drzal, M. J. Rich, and P. F. Lloyd, "Adhesion of Graphite Fibers to Epoxy Matrices: I. The Role of Fiber Surface Treatment", J. Adhesion, 16 (1982) PP. 1-30.
6. P. S. Theocaris, "The Mesophase and its influence on the mechanical Behavior of Composites", in "Charac. of Polymers in the Solid State (I)", Adv. In Polymer Sci. Series, #66, H. H. Kausch and H. G. Zachmann, Springer-Verlag, N. Y. 1985. PP. 150-187.
7. R. W. Walter, R. W. Johnson, R. R. June and J. E. McCarthy, "Designing for Integrity in Long-Life Composite Aircraft Structures," ASTM STP 636, 1977, pp. 228-247.
8. C. S. Hong, "Suppression of Interlaminar Stresses of Thick Composite Laminates Using Sublaminate Approach", in "Adv. Mater. Technol. 87", SAMPE Symp. vol. 32, 1987, PP. 558-565.
9. B. Z. Jang and W. C. Chung, "Structure-Property Relationships in Three Dimensionally Reinforced Fibrous Composites", in "Advanced Composites: The Latest Developments", ASM International, 1986, PP. 183-192.
10. F. K. Ko, H. Chu, E. Ying, "Damage Tolerance of 3-D Braided Intermingled Carbon/Peek Composites", in "Adv. Comp.: The Latest Dev.", ASM International, 1986, PP. 75-88.
11. R. B. Krieger, Jr., "An Adhesive Interleaf to Reduce Stress Concentrations Between Plys of Structural Composites", in "Adv. Mater. Tech. 87, SAMPE Symp. vol. 32, 1987, PP. 279-286.
12. J. Bradshaw, G. Dorey and R. Sidey, "Impact Response of Carbon Fiber Reinforced Plastics," Royal Aircraft Establishment, Tech. Report - 12240, 1973.
13. R. S. Zimmerman and D. F. Adams, "Impact Performance of Various Fiber Reinforced Composites as a Function of Temperature", A Technical Pub of Allied Fibers Technical Center, Petersburg, Va., 1987.
14. D. S. Cordova and A. Bhatnagar, "High Performance Hybrid Reinforced Fiber Composites - Optimizing Properties with PE Fibers", A Tech. Pyub. of Allied Fibers Tech Center, Petersburg, Va., 1987. Also in 32nd SAMPE Conf. and Exhibits, Anaheim, Ca., April 4-9, 1987.
15. D. S. Cordova and A. Bhatnagar, "High Performance Hybrid Reinforced Fiber Composites - Optimizing Properties with PE Fibers", A Tech. Pyub. of Allied Fibers Tech Center, Petersburg, Va., 1987. Also in 32nd SAMPE Conf. and Exhibits, Anaheim, Ca., April 4-9, 1987.
16. D. F. Adams, R. S. Zimmerman and H. W. Chang, "Properties of a Polymer- Matrix Composite Incorporating Allied Spectra 900 PE Fibers", Proceedings of the National SAMPE Symposium, Anaheim, Ca., March 19, 1985.
17. W. J. Cantwell, P. T. Curtis and J. Morton, "An Assessment of the Impact Performance of CFRP Reinforced with High-Strain Carbon Fibers," Composites Science and Technology, 25 (1986) pp. 133-148.
18. W. J. Cantwell and J. Morton, "Ballistic Perforation of CFRP," Proc. Conf. on Impact of Polymeric Materials, Guildford, Durrey, Sept., 1985.
19. P. T. Curtis, "An Initial Evaluation of a High-Strain Carbon Fiber Reinforced Epoxy," Royal Aircraft Establishment TR 84004 (1984).
20. G, Dorey, in Adv. Composites, Ed. by I. K. Partridge, Elsevier Appl. Sci. London (1989) Chap. 11.
21. L. D. Bravenec, A. G. Filippov, and K. C. Dewhirst, 34th International SAMPE Symposium, May 8-11, 1989, pp. 714-725.
22. S. Murakami, O. Watanobe, H. Inoue, M. Ochi, T. Shiraishi, and M. Shimbo, International SAMPE Sympo. May 1989, pp. 2194-2205.
23. C. B. Bucknall and T. Yoshii, Br. Polymer J. 10(1978) 53.
24. C. B. Bucknall, Toughened Plastics, Applied Science, London, (1977).
25. A. Van den Boogaart, in "Physical Basis of Yield and Fracture", Inst. of Phys., London (1966) p. 167.
26. J. N. Sultan, R. C. Laible and F. J. McGarry, Appl. Polymers Symp., 16, (1971) 127.
27. J. N. Sultan and F. J. McGarry, J. Polymer Sci., 13(1973) 29.
28. B. Z. Jang et al. "Thermoplastic Particulate and Whisker-Filled Epoxy", J. Reinforced Plastics and Comp., (1989)
29. W. J. Cartwell and A. C. Roulin-Moloney, in Fractography and Failure Mechanisms of Polymers and Composites; A. C. Roulin-Moloney, Ed., Elsevier Appl. Sci., London, (1989), pp. 233-290.
30. A. J. Kinloch, D. A. Maxwell and R. J. Young, J. Materials Sci. Letter, 4 (1985) 1276.
31. A. J. Kinloch and R. J. Young, "Fracture Behavior of Polymers", Appl. Sci. Pub., New York, 1983.
32. R. H. Pater, in "Encyclopedia of Composites", S. Lee, Ed. VCH Publishers, Inc., 1990.
33. H. G. Recker et al., SAMPE Journal, 26(2) (1990) 73-7.
34. R. S. Bauer, H. D. Stenzenberger, and W. Roomer, 34th International SAMPE Symposium, May 8-11, 1989, pp 899-909.
35. H. D. Stenzenberger, W. Romer, P. M. Hergenrother and B. J. Jensen, 34th International SAMPE Symposium, May 1989, pp.2054-2068 and pp.1877-1888.
36. C. R. Lin, W. L. Liu and J. T. Hu, 34th International SAMPE Symp., May 1989 pp. 1803-1813.
37. R. H. Pater, ANTEC Proceeding, The Soc. of Plastics Engineers, (1989) 1434-1439.
38. R. H. Pater and C. D. Morgan, "LaRC-RP40", SAMPE Journal, vol. 24, No. 5, Sept./Oct. 1988, pp. 25-32.
39. B. Z. Jang, L. C. Chen, R. H. Zee, "The Response of Fibrous Composites To Impact Loading", Polymer Composites, 11 (June 1990) 144-157.
40. L. J. Broutman and P. K. Mallick, "Impact Behavior of Hybrid Composites", AFOSR TR-75-0472, Nov. 1974.
41. S. H. Jao and F. J. Mcgarry, "On the Failure Work and Modulus of Composites Reinforced by Thin Elaster-Coated Fibers", J. of Composite Materials, 26(1992) pp2632-2653.
42. Premamoy ghosh and Nripati Ranjan Bose, "FRP Composites Based on Different Types of Glass Fibers and Matrix Resins: A Comparative Study", J. of Applied Polymer Science, 58(1995) pp2177-2184.
43. Jang-Kyo Kim & Yiu-Wing Mai, "Fracture of CFRP Containing Impregnated Fiber Bundles", Composites Science and Techbnology, 49(1993) 51-60.
44. P. T. Curtis and S. M. Bishop, Composites, 15 (4) (1984) 259-264.
45. S. M. Bishop, in Textile Structural Composites, T. W. Chou and F. K. Ko, Eds., Comp. Materials Series, Vol. 3 (1989) Chap. 6.
46. L. W. Gause. Mech. Composite Review, AFML, Oct. 1983.
47. F. K. Ko and D. Hartman, SAMPE J. 22 (4) (1986) pp.26.
48. A. P. Majidi, M. J. Rotermund and L. E. Taske, SAMPE J. 24 (Jan/Feb 1988) pp.12-17.
49. W. C. Chung, B. Z. Jang, T. C. Chang, L. R. Hwang and R. C. Wilcox, Materials Sci. and Eng., A112 (1989) pp.157-173.
50. B. Z. Jang, L. C. Chen, C. Z. Wang, H. T. Lin, and R. H. Zee, "Impact Resistance and Energy Absorption Mechanisms In Hybrid Composites," Composites Science and Technology, 34 (1989) pp.305-335.
51. D. F. Adams and A. K. Miller, Materials Sci. Eng. 19 (1975) 245-260.
52. P. W. R. Beaumont, P. G. Reiwald and C. Zweben, in Foreign Object Impact Behavior of Composites, ASTM STP 568 (1974) pp.134-158.
53. A. Poursartip, G. Riahi, E. Teghtsoonian, N. Chinatambi, N. Mulford, "Mechanical Prop Of PE Fiber/Carbon Fiber Hybrid Laminates", ICCM-VI and ECCM-II, Vol. 1, 1987, Elsevier Appl. Aci., PP.209-220.
54. W. C. Shih and B. Z. Jang, J. Reinforced Plastics and Comp. 8 (May 1989) pp.270-298.
55. P. Keung and L. J. Broutman, Polyner Eng. Sci. 18 (2) (1978) 62-72.
56. R. E. Evans and J. E. Masters, in "Toughened Composites, ASTM STP 937, American Society for Testing and Materials, Philadelphia, 1987, pp. 413-436.
57. C. M. Tung, T. T. Liao, and C. L. Leung, 33rd International SAMPE Symposium, 1988, pp. 503-511.
58. B. Carroll, 33rd International SAMPE Symposium, 1988, pp. 78-90.
59. R. B. Krieger, Jr., 29th International SAMPE Symposium, 1984, pp. 1570-1584.
60. K. R. Hirshbuehler, SAMPE Quarterly 17, 1985, pp. 46-49.
61. G. L. Dolan and J. E. Masters, 20th International SAMPE Technical Conference, 1988, pp. 34-45.
62. J. E. Masters, J. L. Courter, and R. E. Evans, 31st International SAMPE Symposium, 1986, pp. 844-858.
63. R. B. Krieger, Jr., SAMPE J., July/August 1987, pp. 30-32.
64. C. T. Sun and S. Rechak, in Composite Materials: Testing and Design (Eight Conf.), ASTM STP 972, J. D. Whitcomb, Ed. ASTM, Phila., 1988, pp. 97-123.
65. J. E. Masters, Internl. Conf. on Comp. Mater., (ICCM-VI) 1987, pp. 3.96-3.107.
66. A. K. Kaw an J. G. Goree, ICCM-VI, 1987, pp. 3.146-3.155.
67. W. S. Chan, C. Rogers, and S. Aker, in Composite Materials: Testing and Design (Seventh Conf.), ASTM STP 893, ASTM, Phila., 1986, pp. 266-285.
68. C. T. Sun and P. M. Voit, Composites Technology Review, (1985) 109-113.
69. K. R. Hirschbuehler, in "Toughened Composites, ASTM STP 937, American Society for Testing and Materials, Philadelphia, 1987, pp. 61-73.
70. R. J. Palmer, Proceedings of the Fifth DoD/NASA Conf on Fibrous Composites in Structural Design, NADC-81096-60, Jan. 1981.
71. H. T. Hahn and J. G. Williams, NASA Tech. Memo. 85834, Aug. 1984.
72. R. Garcia, R. E. Evans and R. J. Palmer, in Toughened Comp., ASTM STP 937, N. J. Johnston, Ed., ASTM, Phila., 1987, pp. 397-412.
73. R. Garcia, NADC-83058-60, July 1983.
74. T. L. Lin and B. Z. Jang, Ann. Tech. Conf. (ANTEC) May 1989, NYC.
75. J. Y. Liau, B. Z. Jang, L. R. Hwang, and R. C. Wilcox, Plastic Eng. Nov. 1988.
76. L. A. Mignery, T. M. Tan, and C. T. Sun, in W. S. Johnson, (ed.), Delamination and Debonding, ASTM Spec. Tech. Publ. 876, 1985, pp. 371-385.
77. J. G. Funk, H. B. Dexter and S. J. Lubowinski, in NASA Conf. Proc. 2420, November 1985, pp. 185-205.
78. X. Du, F. Xue, and Z. Gu, International Symp. on Composite Materials and Structures, Beijing, June 10-13, 1986, Technomic, Lancaster, Pa. 1986, pp. 912-18.
79. B. Z. Jang and W. C. Chung, Proc. 2nd Conf. on Advanced Composites: The Latest Developments, Dearborn, MI, November 18-20, 1986, ASM International, Metals Park, OH, 1986 pp. 183-191.
80. D. Liu, K. G. Kim and S. Hong, in Advanced Composites III: Expanding the Technology, Proc. of the 3rd Annual Conf. on Adv. Comp, Sep. 1987, Pub. by ASM International, PP. 343-347.
81. W. C. Chung, B. Z. Jang, T. C. Chung, L. R. Hwang, and R. C. Wilcox, Materials Science and Eng., A112 (1989) pp. 157-173.
82. B. Z. Jang, W. K. Shih and W. C. Chung, J. of Reinforced Plastics and Composites, Nov. (1989) pp. 538-564.
83. D. Liu, Proc. of the Am. Soc. for Composites 2nd Tech. Conf., Sep. 1987, Newark, Delaware.