Three-Dimensional Characterization of Impact Damage in CFRPs

Key Engineering Materials

Volumn 141-143, Issue , 1998, Pages 35-54

  Gao, S L ^a   Kim, J K ^a  

^a HONG KONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Hong Kong)

Author keywords

De Ply Techniques; Delamination; Impact Damage; Laminated Composites; Nondestructive Techniques; Three Dimensional Characterization

Indexed keywords

ACOUSTIC EMISSION TESTING; ACOUSTIC WAVE BACKSCATTERING; CARBON FIBER REINFORCED PLASTICS; COMPUTERIZED TOMOGRAPHY; DELAMINATION; FIBER OPTICS; FRACTOGRAPHY; IMPACT TESTING; LAMINATED COMPOSITES; RADIOGRAPHY; X RAY ANALYSIS;

DE PLY RADIOGRAPHY; SCANNING ACOUSTIC MICROSCOPY (SAM); STEREO RADIOGRAPHY; X RAY COMPUTED TOMOGRAPHY; X RAY RADIOGRAPHY; X RAY TOMOGRAPHIC MICROSCOPY (XTM);

PLASTIC LAMINATES;

EID: 0031647797     PISSN: 10139826     EISSN: 16629795     Source Type: Book Series    
DOI: None     Document Type: Article

References (48)

1. W.J. Cantwell and J. Morton, "The impact resistance of composite materials - A review," Composites, 1991, Vol. 22, 347-372.
2. J.K. Kim, D.B. Mackay and Y.W. Mai, "Drop-weight impact damage tolerance of CFRP with rubber-modified epoxy matrix," Composites, 1993, Vol. 24, 485-491.
3. K.I. McRae, A.G. McCray, A.J. Russell and C.P. Bowers, "Ultrasonic imaging of delamination damage around fastener holes in a graphite/epoxy composite," in Damage Detection in Composite Materials, ASTM STP 1128, J.E. Masters, Ed., American Society for Testing and Materials, Philadelphia, 1992, pp.163-179.
4. F.K. Ko, "Three-dimensional fabrics for composites," in Textile Structural Composites, T.W. Chou and F.K. Ko eds. Elsevier Sci. Pub., Amsterdam, 1989, Chapter 7, pp.129-171.
5. J.K. Kim, "Methods for improving impact damage resistance of CFRPs," in Key Eng. Mater., 1997, in press.
6. R.D. Adams and P. Cawley. NDT Int., 1988, Vol. 21, 208.
7. S.K. Burke, S.M. Cousland and C.M. Scala. "Nondestructive Characterization of Advanced Composite Materials," Mater. Forum, 1994, Vol. 18, 85-109.
8. S. Abrate, "Impact on Laminated Composite Materials," Appl. Mech. Rev., 1991, Vol. 44, 155-187.
9. P. Potet, P. Jeannin and C. Bathias, "The use of digital image processing in vibrothermographic detection of impact damage in composite materials," Mater. Eval., 1987, Vol. 45, 466-470.
10. J.B. Deaton and R.S. Rogowski, in Review of Progress in Quantitative Nondestructive Evaluation, D.O. Thompson and D.E. Chimenti, Ed., Plenum Press, New York, 1993, Vol. 12A, pp.395.
11. A. Haque and P.K. Raju, "Sensitivity of the acoustic impact technique in characterizing defects/damage in laminated composites," J. Rein. Plastics Compos., 1995, Vol. 14, 281-296.
12. S.M. Freeman, "Characterization of Lamina and Interlaminar Damage in Graphite/epoxy Composites by the De-ply Technique," ASTM STP 787, 1982, pp. 50-64.
13. E.G. Henneke II. "Destructive and nondestructive tests," in Engineered Materials Handbook, Vol. I: Composites., American Society for Metals, OH, 1987, pp.774-778.
14. A. Palazotto, G.E. Maddux and B. Horban, "The use of stereo X-ray and de-ply techniques for evaluation instability of composite cylindrical panels with de-laminations," Exper. Mech., 1989, Vol. 29, 144-151.
15. S.M. Freeman, "Correlation of X-ray radiograph images with actual damage in graphite-epoxy composites by the de-ply technique," in Proceedings of Composites in Manufacturing 3, Society of Manufacturing Engineers, Dearborn, MI, 1984, pp. EM84/101/1-EM84/101/13.
16. C.E. Harris, "Damage evaluation by laminate de-ply," in Manual on Experimental Methods for Mechanical Testing of Composites, Soc. Exp. Mechanics, CN, USA, 1989,pp.147-149.
17. C.G. Kim and E.J. Jun, "Measurement of impact delamination by de-ply technique," Exper. Tech., 1992, pp. 26-28.
18. G. Clark, "Modelling of impact induced damage in composite laminates," Composites, 1989, Vol. 20, 209-214.
19. R.J. Chester, and G. Clark, "Modelling of impact damage features in graphite/epoxy laminates," in Damage Detection in Composite Materials, ASTM STP 1128, J.E. Masters, Ed., American Society for Testing and Materials, Philadelphia, 1992, pp. 200-212.
20. D.J. Boll, W.D. Bascom, J.C. Weidner, and W.J. Murri, "A microscopy study of impact damage of epoxy-matrix carbon-fibre composites," J. Mater. Sci., 1986, Vol. 21, 2667-2677.
21. C. A. Ross, and R. L. Sierakowski, "Studies on the impact resistance of composite plates," Composite, 1973, Vol. 4, 157-161.
22. L.E. Malvem, C.T. Sun, and D. Liu, "Delamination damage in central impacts at subperforation speeds on laminated Kevlar/epoxy plates," ASTM STP 1012, 1989, pp. 387-405.
23. Y. Hirai, H. Hamada, and J.K. Kim, "Damage modes in impact loading of glass woven fibric composites," Adv. Compos. Lett., 1996, Vol. 5, 59-63.
24. S.R. Finn, and G.S. Springer, in Composite Plates Impact Damage, Technomic Pub. Co., Lancaster, PA. 1991.
25. M.T. Kortschot and C.J. Zhang, "Characterization of composite mesostructures and damage by de-ply radiography," Compos. Sci. Technol., 1995, Vol. 53, 175-181.
26. R.D. Jamison, "Microscopic techniques for damage assessment in laminated composites," in Microstructural Science (Vol.14), M.R. Louthan Jr, I. LeMay & G.F. Vander Voort. Ed., American Society for Metals, OH, 1987, pp. 539-559.
27. J.H. Kinney, D.L. Haupt, M.C. Nichols, T.M. Breunig, G.W. Marshall, Jr. and S.J. Marshall, "The X-ray tomographic microscope: three-dimensional perspectives of evolving microstructures," Nucl. Instr. Meth. Phys. Res., 1994, Vol. 347 A, 480-486.
28. S.R. Stock, T.M. Breunig, A. Guvenilir, J.H. Kimmey and M.C. Nichols, "Nondestructive X-ray tomographic microscopy of damage in various continuous-fiber metal matrix composites," in Damage Detection in Composite Materials, ASTM STP 1128, J.E. Masters, Ed., American Society for Testing and Materials. PA, 1992, pp. 25-34.
29. S. Girshovich, T. Gottesman, H. Rosenthal, E. Drukker, and Y. Steinberg, "Impact damage assessment of composites," in Damage Detection in Composite Materials, ASTM STP 1128, J.E. Masters, Ed., American Society for Testing and Materials. PA, 1992, pp.183-199.
30. C. Bathias and A. Cagnasso, "Application of X-ray tomography to the nondestructive testing of high-performance polymer composites," in Damage Detection in Composite Materials, ASTM STP 1128, J.E. Mastters, Ed., American Society for Testing and Materials, PA, 1992, pp.35-54.
31. C.F. Buynak and R.H. Bossi, "Applied X-ray computed tomography," Nucl. Instr. Meth. Phys. Res., 1995, Vol. B99, 772-774.
32. J.H. Kinney, S.R, Stock, M.C. Nichols, U. Bonse, T.M. Breunig, R.A. Saroyan, R. Nusshardt, Q.C. Johnson, F. Busch and S.D. Antolovich, "Nondestructive investigation of damage in composites using x-ray tomographic microscopy (XTM)," J.Mater. Res., 1990, Vol. 5, 1123-1129.
33. P.M. Mummery, B. Derby, P. Anderson, G.R. Davis and J.C. Elliott, "X-ray microtomographic studies of metal matrix composites using laboratory x-ray sources," J. Microscopy, 1995, Vol. 177, 399-406.
34. B.P. Flannery, H. Deckman, W. Roberge and K. D'Amico, "Three-dimensional X-ray microtomography," Science, 1987, Vol. 237, 1439.
35. T. Hirano, K. Usami, Y. Tanaka, and C. Masuda, "In situ x-ray CT under tensile loading using synchrotron radiation," J. Mater. Res., 1995, Vol. 10, 381-386.
36. C.F. Buynak, T.J. Moran and S. Donaldson, "Characterization of impact damage in composites," SAMPE J., 1988, Vol. 24, .35-39.
37. B.G. Frock, T.J. Moran, K.D. Shimmin and R.W. Martin, "Imaging of impact damage in composite materials," Rev. Prog. Quant. Nondestruct. Eval., 1988, Vol. 7B, 1093-1099.
38. S.L. Gao, J.K. Kim, and X.J. Xian, "Characterization of impact damage in CFRPs using a scanning acoustic microscope," in Proc. 11th Intern. Conf. Composite Mater. (ICCM-11), 1997, in press.
39. B.T. Smith, G.L. Farley, J. Maiden, D. Coogan and J.G. Moore, "Damage assessment and residual compression strength of thick composite plates with through-the-thickness reinforcements," Rev. Prog. Quant. Nondestruct. Eval., 1991, Vol. 10, 1623-1630.
40. B.T. Smith, J.S. Heyman, A.M. Buoncristiani, E.D. Boldgett, J.G. Miller and S.M. Freeman, "Correlation of the de-ply technique with ultrasonic image of impact damage in graphite-epoxy composites," Mater. Evalu., 1989, Vol. 47, 1408-1416.
41. C.F. Buynak, T.J. Moran, and R.W. Martin, "Delamination and crack imaging in graphite/epoxy composites," Mater. Evalu., 1987, Vol. 6B, 1203-1211.
42. H. Kaczmarek, and S. Maison, "Comparative ultrasonic analysis of damage in CFRP under static indentation and low-velocity impact," Compos. Sci. Technol., 1994, Vol. 51, 11-26.
43. J.N. Zalameda, G.L. Farey and B.T. Smith, "A field deployable nondestructive impact damage assessment methodology for composite structures," J. Compos. Technol. Res. (JCTRER), 1994, Vol. 16, 161-169.
44. R.M. Crane and J. Gagorik, "Fibre optics for a damage assessment system for fibre reinforced plastic composite structures," Rev. Prog. Quant. Nondestruct. Eval., 1984, Vol. 28, 288-294.
45. B. Hofer, "Fibre optic damage detection in composite structures," Composites,1997, Vol. 18, 309-316.
46. W.B. Spillman and P.L. Fuhr, "Impact detection and location system for smart skins application," in Proceeding SPIE, Fibre Optic Smart Structures and Skins III, 1990, Vol. 1370, 308-315.
47. J.S. Sirkis, C.C. Chang, and B.T. Smith, "Low velocity impact of optical fibre embedded laminated graphite/epoxy panels, part I: macro-scale," J. Compos. Mater., 1994, Vol. 28, 1347-1370.
48. K.A. Murphy, C.A. Schmid, T.A. Tran, G. Carman, A. Wang, and R.O. Claus, "Delamination detection in composites using optical fibre," in Proceeding of the SPIE - The International Society for Optical Engineering, 1994, Vol. 2191, 227-231.