Tribology issues in machining

Machining Science and Technology

Volumn 2, Issue 1, 1998, Pages 137-154

  Jahanmir, S ^a  

^a NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ABRASIVES; CUTTING TOOLS; GRINDING WHEELS; PROCESS CONTROL; TRIBOLOGY; WEAR OF MATERIALS;

WEAR MEASUREMENT;

MACHINING;

EID: 0031635121     PISSN: 10910344     EISSN: None     Source Type: Journal    
DOI: 10.1080/10940349808945663     Document Type: Review

References (120)

1. C. K. Ludema, Friction, Wear, and Lubrication, CRC Press, Boca Raton, FL (1997).
2. M. Rahman, W. Seah, and T. Teo, J. Mat. Proc. Tech., 63 (1997) 199-204.
3. Y. Liao and R. Shiue, Wear, 193 (1996) 16-24.
4. T. Kitagawa, A. Kubo, and K. Maekawa, Wear, 202 (1997) 142-148.
5. S. Bhaumik, C. Divakar, and A. Singh, Materials and Design, 16 (1995) 221-226.
6. Y. Chou and C. Evans, Int. Sym. on Information Storage and Processing Systems, MED-4 (1996) ASME, New York, NY 237-242.
7. M. Davies, Y. Chou, and C. Evans, Annals of CIRP, 45 (1996) 77-82.
8. M. Masuda, Y. Kuroshima, and Y. Chujo, Wear, 195 (1996) 178-185.
9. M. Masuda, E. Yabuuchi, Y. Kuroshima, and M. Itou, J. of the Japan Society for Precision Engineering, 62 (1996) 463-467.
10. E. Sentoku, H. Tanaka, and H. Kawabata, J. of the Japan Society of Powder and Powder Metallurgy, 43 (1996) 493-497.
11. B. Yan, F. Huang, and H. Chow, J. Mat. Proc. Tech., 54 (1995) 341-347.
12. Z. Wang and K. Rajurkar, Int. J. Machine Tools and Manufacture, 37 (1997) 319-326.
13. W. Konig and A. K. Zaboklicki, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 455-464.
14. A. Chambers, Composites - Part A: Applied Science and Manufacturing, 27 (1996) 143-147.
15. N. Hung, N. Loh, and Z. Xu, J. Mat. Proc. Tech., 58 (1996) 114-120.
16. N. Hung and C. Zhong, J. Mat. Proc. Tech., 58 (1996) 109-113.
17. S. Barnes, I. Pashby, and D. Mok, J. Manuf. Sci. and Eng., 118 (1996) 422 -427.
18. H. Shimanuki, T. Hasegawa, T. Yasuno, T. Takahashi, and N. Nishiwaki, J. Japan Institute of Light Metals, 46 (1996) 632-637.
19. K. Weinert and D. Biermann, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 437-446.
20. R. Komanduri, Machining Science and Technology, 1 (1997) 95-130.
21. G. Santhanakrishnan, R. Krishnamurthy, and S. K. Malhotra, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 489-500.
22. G. Caprino, L. Santo, and L. Nele, Proc. of Conf. on Engineering Systems Design and Analysis, 75 ASME, New York, NY (1996) 83-87.
23. G. Caprino, I. De lorio, L. Nele, and L. Santo, Composites - Part A: Applied Science and Manufacturing, 27 (1996) 409-415.
24. K. Yamaguchi, J. Afaghani, I. Horaguchi, and T. Nakamoto, Trans. of Japan Society of Mech. Eng., Part C, 62 (1996) 2857-2863.
25. K. Yamaguchi, J. Afaghani, T. Nakamoto, and K. Yoshino, Trans. of Japan Society of Mech. Eng., Part C, 62 (1996) 4710-4716.
26. N. L. Cupini and J. R. Ferreira, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 447-454.
27. S. Lin and I. Chen, Wear, 194 (1996) 156-162.
28. A. Di Ilio, A. Paoletti, and F. Veniali, Proc. of Conf. on Engineering Systems Design and Analysis, 75 ASME, New York, NY (1996) 41-46.
29. W. S. Chen and K. F. Ehmann, Tribology in Manufacturing Processes, CRTD-30, ASME, New York, NY (1994) 145-158.
30. C. Chen, H. Yu, R. Zhu, X. Zhou, J. Yu, and S. Wang, Chinese Journal of Lasers, 23 (1996) 1121-1126.
31. A. Chumikov, O. Polunina, and V. Akif'ev, Metal-lovedenie I Termicheskaya Obrabotka Metallov, 11 (1996) 21-22.
32. G. Meier zu Koecker and K.-H. Habig, Surface and Coatings Technology, 82 (1996) 294-304.
33. G. Fox-Rabinovich, A. Kovalev, and S. Afanasyev, Wear, 201 (1996) 38-44.
34. G. Fox-Rabinovich, A. Kovalev, and S. Afanasyev, Wear, 198 (1996) 280-286.
35. I. Konyashin, Proc. of Int. Sym. on Trends and New Applications in Thin Films, Soc. Francaise du Vide, Paris, France (1996) 182-184.
36. G. D'errico, R. Chiara, and E. Guglielmi, Surface and Coatings Tech., 86-87 (1996) 735-738.
37. K.-L. Lin, M.-Y. Hwang, and C-D Wu, Materials Chemistry and Physics, 46 (1996) 77-83.
38. J. Vetter, Surface and Coatings Technology, 76-77 (1995) 719-724.
39. H. Curtins, Surface and Coatings Technology, 76-77 (1995) 632-639.
40. R. Komanduri, Friction and Wear of Ceramics, S. Jahanmir (ed.), Marcel Dekker, New York, NY (1993) 289-312.
41. S. F. Wayne and T. Buljan, Friction and Wear of Ceramics, S. Jahanmir (ed.), Marcel Dekker, New York, NY (1993) 261-288.
42. T. Obikawa, T. Matsumura, T. Shirakashi, and E. Usui, J. Mat. Proc. Tech., 63 (1997) 211-216.
43. J. S. Sternkowski and W. C. Larson, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 295-302.
44. E. Paul, C. Evans, A. Mangamelli, M. McGlauflin, and R. Polvani, Precision Engineering, 18 (1996) 4-19.
45. K. Budinski, J. Testing and Evaluation, 25 (1997) 226-232.
46. S. Kim and B. Klamecki, J. Manuf. Sci. and Eng., 119 (1997) 118-119.
47. S. Kumar, H. Ravindra, and Y. Srinivasa, Int. J. of Production Research, 35 (1997) 739-751.
48. S. Dan, R. Islam, and A. Chattopadhyay, Proc. of Inst. of Mech. Eng., Part B: J. Eng. Manufacture, 211 (1997) 19-27.
49. T. Shirakashi, W. Gong, and T. Obikawa, J. Japan Society for Precision Engineering, 61 (1995) 1750-1754.
50. H.-T. Young, Wear, 201 (1996) 117-120.
51. Y. Wong, A. Nee, X. Li, and C. Reisdorf, J. Mat. Proc. Tech., 63 (1997) 205-210.
52. S. Kurada and C. Bradley, Tribology Int., 30 (1997) 295-304.
53. A. Mei and J. Wang, Proc. of Modeling, Simulation, and Control Technologies for Manufacturing, 2596 SPIE, Bellingham, WA (1995) 124-132.
54. C. Leem, Int. J. Prod. Res., 35 (1997) 1051-1066.
55. C. Leem and D. Dornfeld, Mech. Sys. and Signal Processing, 10 (1996) 439-458.
56. F. Betancourt-Silva, F. Betancourt-Soto, L. Barrios, and D. Guinea, Proc. of Int. Caracas Conference on Devices, Circuits and Systems, IEEE, Piscataway, NJ (1995) 98-102.
57. G. Littlefair, M. Javed, and G. Smith, Int. Conf. on Neural Networks, 2, IEEE, Piscatawy, NJ (1995) 734-737.
58. J. Barton and B. Reuben, Materials World, 4 (1996) 131-132.
59. J. Fang, L. E. Atlas, and G. Bernard, Proc. of Machine Tool, In-Line, and Robot Sensors and Controls, 2595 SPIE, Bellingham, WA (1995) 38-46.
60. D. Saini and Y. Park, J. Mat. Proc. Tech., 58 (1996) 343-350.
61. T. Carolan, D. Hand, J. Barton, J. Jones, P. Wilkinson, and R. Reuben, J. Manuf. Sci. and Eng., 118 (1996) 428-433.
62. S. Das, P. Bandyopadhyay, and A. Chattopadhyay, J. Mat. Proc. Tech., 63 (1997) 187-192.
63. T. Shibasaka and K. Sakata, J. Japan Soc. for Precision Eng., 63 (1997) 65-69.
64. S. Lin and R. Lin, Wear, 198 (1996) 136-142.
65. T. Ko and D. Cho, Int. J. Adv. Manuf. Tech., 12 (1996) 5-13.
66. Z. Wang, W. Lawrenz, R. Rao, and T. Hope, J. Intelligent Manufacturing, 7 (1996) 13-22.
67. M. Javed, A. Hope, G. Littlefair, D. Adradi, G. Smith, and B. Rao, Non-Destructive Testing and Condition Monitoring, 38 (1996) 351-354.
68. J. Lee, D. Kim, and S. Lee, Mechanical Systems and Signal Processing, 10 (1996) 265-276.
69. K. Glass and R. Colbaugh, Proc. Int. Conf. on Robotics and Automation, Part 4, IEEE, Piscataway, NJ (1966) 3067-3072.
70. E. Sunil and Y. Shin, J. Dyn. Syst. Meas. Control, 117 (1995) 459-467.
71. S. Das, A. Chattopadhyay, and A. Murthy, Neural Networks, 9 (1996) 1639 -1645.
72. H. Matsuoka, T. Sakai, A. Katsuki, and Y. Tsuda, Trans. of Japan Society of Mech. Eng., Part C, 62 (1966) 367-374.
73. K. Seah, X. Li, and K. Lee, J. Mat. Proc. Tech., 48 (1995) 495-501.
74. H. Tonshoff, H.-G. Wobker, and D. Brandt, Lub. Eng., 51 (1995) 163-168.
75. H. Matsuoka, A. Katsuki, M. Yano, and S. Inoue, Trans. of Japan Society of Mech. Eng., Part C, 59 (1993) 1878-1883.
76. H. Matsuoka, H. Ono, A. Katsuki, and Y. Tsuda, Trans. of Japan Society of Mech. Eng., Part C, 62 (1966) 359-366.
77. H. Matsuoka, H. Ono, A. Katsuki, and Y. Tsuda, Trans. of Japan Society of Mech. Eng., Part C, 62 (1996) 4069-4077.
78. M. Arai, T. Ohno, M. Ogawa, and S. Sato, J. of Japan Society for Precision Engineering, 62 (1996) 1310-1314.
79. K. Subramanian, Tribology in Manufacturing Processes, CRTD 30, ASME, New York, NY (1994) 61-80.
80. Y. Ichida and K. Kishi, J. Manuf. Sci. and Eng., 119 (1997) 110-117.
81. K. Syoji, J. Tang, L. Zhou, and N. Kawabata, Trans. of Japan Society of Mech. Eng., Part C, 61 (1995) 406-411.
82. T. Kuriyagawa and K. Syoji, Bulletin of Japan Society for Precision Engi-neering, 24 (1990) 118-123.
83. Y. Tomita and H. Eda, Wear, 195 (1996) 74-80.
84. T. Senba, S. Omori, K. Takeuchi, and K. Ohira, Trans. of Japan Society of Mech. Eng., Part C, 61 (1995) 2106-2112.
85. E. Westkamper and H. Tonshoff, Annals of CIRP, 42, (1993) 371-374.
86. Y. Maeda, M. Masuda, Y. Koizumi, and M. Watanabe, J. of Japan Society for Precision Engineering, 59 (1993) 1301-1306.
87. H. Onikura, K. Koshima, and K. Sakuma, J. of Japan Society of Precision Engineering, 57 (1991) 1041-1046.
88. A. Di Ilio, A. Paoletti, V. Tagliaferri, and F. Veniali, Proc. of Conf. on Eng. Systems Design and Analysis, 64, ASME, New York, NY (1994) 27-33.
89. S. Danyluk, Tribology in Manufacturing Processes, CRTD, 30, ASME, New York, NY (1994) 99-108.
90. K. Li, G. Fang, T. Liao, and J. Mayer, Proc. of 24th NAMRC Conference, SME, Dearborn, MI (1996) 1-4.
91. H. G. Wobker and H. K. Tonshoff, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 171-184.
92. K. T. Ritchie, Investigation of Wheel Wear and Its Effect on Forces Encountered in Grinding Silicon Nitride, M.S. Thesis, University of Maryland, College Park, MD, 1996.
93. A. K. Chattopadhyay and H. E. Hintermann, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 33-42.
94. S. C. Siegel and J. A. von Fraunhofer, Machining Science and Technology, 1 (1997) 1-15.
95. E. Gotou and M. Touge, J. Mat. Proc. Tech., 62 (1996) 408-414.
96. E. Gotou, M. Touge, and Y. Ohbuchi, J. of Japan Society for Precision Engineering, 62 (1996) 1320-1324.
97. H. Tonshoff, SME Technical Paper, MR, SME, Dearborn, MI (1993) 1-15.
98. E. Brinksmeier and F. Werner, Annals of CIRP, 42 (1992) 373-376.
99. J. F. Gomes de Oliveira and C. K. Neto, Manufacturing Engineering: 2000 and Beyond, I. D. Marinescu (ed.), Freund Publishing, London, England (1996) 44-46.
100. A. Torrance, Wear, 156 (1992) 281-299.
101. Y. Kawano, T. Matsuo, and R. Hikiji, J. of Japan Society for Precision Engineering, 60 (1994) 808-811.
102. T. Tanaka, Proc. of Sym. on Flexible Automation, Part 2, ASME, New York, NY (1992) 1023-1028.
103. E. Brinksmeier and C. Popp, Annals of CIRP, 40 (1991) 355-358.
104. X. Wen, A. Tay, and A. Nee, J. of Mat. Proc. Tech., 29 (1992) 75-90.
105. G. Srihari and G. K. Lal, J. Mat. Proc. Tech. 44 (1994) 14-28.
106. H.-R. Meyer and N. Koch, SME Technical Paper, MR, SME, Dearborn, MI (1993) 1-21.
107. X. Zhao, K. Syoji, T. Kuriyagawa, and L. Zhou, Trans. of Japan Society of Mech. Eng., Part C, 62 (1996) 3725-3730.
108. N. Babu and V. Radhakrishnan, Int. J. Machine Tools and Manufacture, 35 (1995) 661-671.
109. T. Shimamune, M. Mochida, and K. Ono, Int. J. of Japan Society for Precision Engineering, 25 (1991) 11-17.
110. T. Kuriyagawa, K. Soyoji, and L. Zhou, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 325-332.
111. H. Yazdzik and J. Williams, SME Technical Paper, MR SME, Dearborn, MI (1993) 1-16.
112. H. Ohmori, Proc. of Int. Conf. on Machining of Advanced Materials, NIST SP 847, U.S. Government, Washington, DC (1993) 359-366.
113. T. Bifano, R. Krishnamoorthy, H. Caggiano, and E. Welch, Manufacturing Science and Engineering, ASME, New York, NY (1993) 329-348.
114. E. Welch, Y. Yi, and T. Bifano, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 333-340.
115. K. Fujihara, K. Ohshiba, T. Komatsu, M. Ueno, H. Ohmori, and B. P. Bandopadhyay, Machining Science and Technology, 1 (1997) 85-95.
116. K. Suzuki, T. Uematsu, T. Yanase, and T. Nakagawa, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 83-88.
117. Y. Yamanaka, T. Oi, Y. Sakai, and D. Mukai, Lub. Eng., 52 (1996) 359-364.
118. G. Spur and T. Bruecher, Proc. of NAMRC XXIII Conf., SME, Dearborn, MI (1993) 1-10.
119. H. Liang and S. Jahanmir, Tribology in Manufacturing Processes, CRTD 30, ASME, New York, NY (1994) 133-144.
120. S. Jahanmir and H. Liang, Machining of Advanced Materials, NIST SP847, U.S. Government, Washington, DC (1993) 101-115.