Torsional resonance of drill collars with PDC bits in hard rock

Proceedings - SPE Annual Technical Conference and Exhibition

Volumn 1999-September, Issue , 1998, Pages 625-637

  Warren, T M ^a   Oster, J H ^a  

^a Amoco E and P Technology Group   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BITS; DIAMOND DRILLS; DRILL COLLARS; INFILL DRILLING; RESONANCE; ROCKS; VIBRATION ANALYSIS; DATA ACQUISITION; DATA RECORDING; FAILURE ANALYSIS; OIL WELLS; ROTATION; SENSORS; VIBRATIONS (MECHANICAL);

DOWNHOLE VIBRATION SENSORS; LABORATORY TEST; OIL AND GAS WELL; PENETRATION RATES; TORSIONAL RESONANCES; TORSIONAL VIBRATION; VIBRATION LIMITS; VISUAL APPEARANCE;

OIL WELL DRILLING; OIL WELL DRILLS;

DOWNHOLE VIBRATION SENSOR; DRILL COLLARS; HARD ROCKS; TORSIONAL RESONANCE;

EID: 0031633489     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2523/49204-ms     Document Type: Conference Paper

References (27)

1. Dufeyete, M. P., and Henneuse, H.: "Detecting and Monitoring of the Stick-Slip Motion: Field Experiments," paper SPE 21945 presented at the 1991 SPE/IADC Drilling Conference, Amsterdam, March 11-14.
2. Dawson, R., and Lin., Y. Q., Spanos, P. D., "Drillstring Stick-Slip Oscillations", the SEM Spring Meeting (1987).
3. Halsey, G.W. et al.: "Drill-string Torsional vibrations: Comparison Between Theory and Experiment on a Full-Scale Research Drilling Rig," paper SPE 15564 presented at the 1986 SPE Annual Technical Conference and Exhibition, New Orleans, Oct. 5-8.
4. Kyllingstad, A. et al.: "A Study of Slip/Stick Motion at the Bit," SPEDE (Dec. 1988)369-73.
5. Brett, J.F.: "The Genesis of Bit-Induced Torsional Drill-string Vibrations," paper SPE/IADC 21943 presented at the 1991 Drilling Conference, Amsterdam, March 11-14.
6. Brett, J.F., Warren, T.M., and Behr, S.M.: "Bit Whirl - A New Theory of PDC Bit Failure," paper SPE 19571 presented at the 1989 SPE Annual Technical Conference and Exhibition, San Antonio, Oct. 8-11.
7. Langeveld, C.J.: "PDC Bit Dynamics," paper IADC/SPE 23867 presented at the 1992 Drilling Conference, New Orleans, Febuary 18-21.
8. Warren, T.M., Brett, J.F., and Sinor, L.A.: "Development of a Whirl-Resistant Bit," paper SPE 19572 presented at the 1989 SPE Annual Technical Conference and Exhibition, San Antonio, Oct, 8-11.
9. Sinor, L.A. and Illerhous, R.: "Anti-Whirl PDC Bits - Evolution and Field Experiences," Oil Gas European Magazine (March 1993), 29-35.
10. Weaver, G.E. and Clayton, R.I., "A New PDC Cutting Structure Improves Bit Stabilization and Extends Application into Harder Rock Types," paper SPE/IADC 25734 presented at the 1993 Drilling Conference, Amsterdam. Feb. 23-25, 1993.
11. Clegg, J.M., "An Analysis of the Field Performance of Anti-Whirl PDC Bits," SPE/IADC 23868 presented at the 1992 IADC/SPE Drilling Conference, New Orleans, LA, February 18-21.
12. Zannoni, S.A., Cheatham, CA, Chen, D.C.K. and Golla, CA. "Development and Field Testing of a New Downhole MWD Drill-string Dynamics Sensor," paper SPE 26341 presented at the 1993 Annual Technical Conference and Exhibition, Houston, October 6-9.
13. Dykstra, M. W., Chen, D. C. K., Warren, T.M.; and Zannoni, S.A.: "Experimental Evaluations of Drill Bit and Drill String Dynamics," paper SPE 28323 presented at the 1994 SPE Annual Technical Conference and Exhibition, New Orleans, Sept. 25-28.
14. Behr, S. M., Warren, T.M., Sinor, L.A and Brett, J.F.: "Three Dimensional Modeling of PDC Bits," paper SPE 21928 presented at the 1991 SPE/IADC Drilling Conference, Amsterdam, March 11-14.
15. Kenner, J. V. and Isbell, M. R.: "Dynamic Analysis Reveals Stability of Roller Cone Rock Bits", paper SPE 28314 presented at the 1994 Annual Technical Conference and Exhibition, New Orleans, LA, September 25-28.
16. Timoshenko, S, and Young., D. H., and Weaver, Jr, W: Vibration Problems in Engineering, fourth addition, John Wiley & Sons Inc., New York City (1974).
17. Den Hertog, J. P., Mechanical Vibrations. Dover Publications, Inc, New York City (1985).
18. DSVIB1. A Drillstring Vibration Program. User's Manual. Massachusetts Institute of Technology, 1991.
19. H. Y. Lee. Drillstring Axial Vibration and Wave Propagation in Boreholes. Ph.D. thesis, M. I. T., 1991.
20. Clayer, F., and Vandiver., J. K., and Lee, H. Y.: "The Effect of Surface and Downhole Boundary Conditions on the Vibration of Drillstrings," paper 20447 presented at the 1990 Annual Technical Conference and Exhibition, New Orleans, Sept. 23-26.
21. Dareing, D. W., "Drill Collar Length is a Major Factor in Vibration Control", Jour. Pet. Tech. (April 1984), 637-644.
22. Fear, M.J., Abbassian, F. and Parfitt, S.H.L.: "The Destruction of PDC Bits by Severe Slip-Stick Vibration," paper SPE/IADC 37639 presented at the 1997 SPE/IADC Drilling Conference, Amsterdam, March 4-6.
23. Jansen, J.D., van der Steen, L, and Zachariassen, E.: "Active Damping of Torsional Drillstring Vibrations with a Hydraulic Topdrive," paper SPE 28911 presented at the 1994 European Petroleum Conference, London, October 25-27.
24. Halsey, G.W., Kyllingstad, A., and Kylling, A.: "Torque Feedback Used to Cure Slip/Stick Motion," paper 18049 presented at the 1988 Annual Technical Conference and Exhibition, Houston, Oct. 2-5.
25. Sananikohe, P., Kamoshima, O., and White, D. B.: "A Field Method of Controlling Drillstring Torsional Vibrations," paper IADC/SPE 23891 presented at the 1992 Drilling Conference, New Orleans, February 18-21.
26. Warren, T.M., Oster, J.H., Sinor, L.A., Chen, D.C.K.: "Shock Sub Performance Tests," paper SPE 39323 presented at the 1998 IADC/SPE Drilling Conference, Dallas, March 3-6.
27. Behr, S.M., Oster, J.H., Warren, T.M., "Amoco's Test Facility Develops New Drilling Technology", World Oil. (October 1995), 37-43.