Probabilistic buckling analysis of plates and shells

Thin-Walled Structures

Volumn 30, Issue 1-4, 1998, Pages 135-157

  Chryssanthopoulos, M K ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

BUCKLING; CYLINDERS (SHAPES); ELASTOPLASTICITY; MATHEMATICAL MODELS; PLATES (STRUCTURAL COMPONENTS); PROBABILITY; RELIABILITY; SHELLS (STRUCTURES); STRUCTURAL PANELS;

AXIAL COMPRESSION; THIN-WALLED STRUCTURES;

STRUCTURAL ANALYSIS;

EID: 0031598917     PISSN: 02638231     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0263-8231(97)00035-9     Document Type: Article

References (44)

1. Lorenz, R., Die nicht achsensymmetrische knickung dunnwandigen hohlzzylinder. Physik. Z., 13 (1911) 241-260.
2. Timoshenko, S., Achsensymmetrische form des ausbeulels einer zylindrischen schale. Z. Math. Physik., 58 (1910) 378-385.
3. Southwell, R. V., On the general theory of elastic stability. Phil. Trans. R. Soc. London, Series A, 213 (1914) 187-244.
4. Donnell, L. H., A new theory for the buckling of thin cylinders under axial compression and bending. Trans. ASME, 56 (1934) 795-806.
5. Von Karman, Th. and Tsien, H. S., The buckling of thin cylindrical shells under axial compression. J. Aero. Sci., 8(8) (1941) 303-312.
6. Koiter, W. T., Elastic stability and post-buckling behavior. In Nonlinear Problems, ed. R. E. Langer. Proc. Symp. of Math. Res. Center, US Army at the University of Wisconsin, Madison, 1962, pp. 257-275.
7. Bolotin, V. V., Statistical Methods in Structural Mechanics. Holden-Day, San Francisco, 1969.
8. Thompson, J. M. T., Towards a general statistical theory of imperfection sensitivity in elastic post-buckling. J. Mech. Phys. Solids, 15 (1967) 413-417.
9. Roorda, J. and Hansen, J. S., Random buckling behavior in axially loaded cylindrical shells with axisymmetric imperfections. J. Spacecraft and Rockets, 9(2) (1972) 88-91.
10. Amazigo, J. C., Buckling under axial compression of long cylindrical shells with random axisymmetric imperfections. Quart. Appl. Math., 26(4) (1969) 537-566.
11. Hansen, J. S., General random imperfections in the buckling of axially loaded cylindrical shells. AIAA J., 15(9) (1977) 1250-1256.
12. Elishakoff, I. and Arbocz, J., Reliability of axially compressed cylindrical shells with general nonsymmetric imperfections. J. Appl. Mech., 52 (1985) 122-128.
13. Arbocz, J. and Hol, J. M. A. M., Collapse of axailly compressed cylindrical shells with random imperfections. Thin-Walled Struct., 23(1-4) (1995) 131-158.
14. Chryssanthopoulos, M. K., Baker, M. J. and Dowling, P. J., Statistical analysis of imperfections in stiffened cylinders. J. Struct. Eng., ASCE, 117(7) (1991) 1979-1997.
15. Chryssanthopoulos, M. K., Baker, M. J. and Dowling, P. J., Imperfection modelling for buckling analysis of stiffened cylinders. J. Struct. Eng., ASCE, 117(7) (1991) 1998-2017.
16. Chryssanthopoulos, M. K. and Poggi, C., Stochastic imperfection modelling in shell buckling studies. Thin-Walled Struct., 23(1-4) (1995) 179-200.
17. Thoft-Christensen, P. and Baker, M. J., Structural Reliability Theory and its Applications. Springer-Verlag, Berlin, 1982.
18. Baker, M. J. and Ramachandran, K., Reliability design of fixed offshore structures. In Integrity of Offshore Structures, ed. D. Faulkner et al. Applied Science Publishers, London, 1981, pp. 135-153.
19. Das, P. K., Frieze, P. A. and Faulkner, D., Reliability of stiffened steel cylinders to resist extreme loads. In Behaviour of Offshore Structures, Hemisphere Publishing Company, New York, Vol. 2, 1982, pp. 769-783.
20. Frieze, P. A., Das, P. K. and Faulkner, D., Partial safety factors for stringer stiffened cylinders under extreme compressive loads. In Proc. 2nd Int. Symp. on Practical Design in Shipbuilding, Tokyo, 1983, pp. 475-482.
21. Faravelli, L., Response surface approach for reliability analysis. J. Eng. Mech., ASCE, 115(2) (1989) 2763-2781.
22. Chryssanthopoulos, M. K., Baker, M. J. and Dowling P. J., A reliability approach to the local buckling of stringer-stiffened cylinders. In Proc. 5th Offshore Mechanics and Arctic Engineering Symposium, ASME, Tokyo, 1986.
23. Chryssanthopoulos, M. K., Baker, M. J. and Dowling P. J., Reliability-based design of stringer-stiffened cylinders under axial compression. In Proc. 6th Offshore Mechanics and Arctic Engineering Symposium, ASME, Houston, 1987.
24. Walker, A. C., A brief review of plate buckling research. In Conf. on Behaviour of Thin-Walled Structures, Strathclyde University, ed. J. Rhodes and J. Spence, 1984, Elsevier Applied Science, London, pp. 375-397.
25. Dowling, P. J. and Burgan, B. A., Plated structures - onshore and offshore. Steel Construction Today, 2 (1988) 175-188.
26. Dwight, J. B. and Moxham, K. E., Welded steel plates in compression. The Struct. Engineer, 47(2), (1969) 49-66.
27. Faulkner, D., A review of effective plating for use in the analysis of stiffened plating in bending and compression. J. Ship Res., 19(1) (1975) 1-17.
28. Chapman, J. C., Smith, C. S., Davidson, P. C. and Dowling, P. J., Recent developments in the design of stiffened plate structures. In Advances in Marine Structures - 2, ed. C. S. Smith and R. S. Dow. 1991, Elsevier Applied Science, London, pp. 529-548.
29. Carlsen, C. A., Simplified collapse analysis of stiffened plates. Norwegian Maritime Res., 4 (1977) 20-36.
30. Guedes Soares, C., Uncertainty modelling in plate buckling. Struct. Safety, 5 (1988) 17-34.
31. Rhodes, J., On the approximate predictions of elasto-plastic plate behaviour. Proc. ICE, 71 (1981) 165-183.
32. Vilnay, O. and Rockey, K. C., A generalised effective width method for plates loaded in compression. J. Constr. Steel Res., 1(3) (1980) 3-12.
33. Bonello M. A., Reliability assessment and design of stiffened compression flanges. Ph.D. Thesis, Imperial College, University of London, 1992.
34. Ivanov, L. D. and Roussev, S. G., Statistical estimation of reduction coefficient of ship's hull plates with initial deflections. The Naval Architect, 4 (1979) 158-160.
35. Antoniou, A. C., Lavidas, M. and Karvounis, G., On the shape of post-welding deformations of plate panels in newly built ships. J. Ship Res., 24(1) (1984) 1-10.
36. Fukumoto, Y. and Itoh, Y., Basic compressive strength of steel plates from test data. Trans. Japan Soc. Civil Eng., 344/I-1 (1984) 129-139.
37. Bonello, M. A., Chryssanthopoulos, M. K. and Dowling, P. J., Probabilistic strength modelling of unstiffened plates under axial compression. In Proc. 10th Offshore Mechanics and Arctic Engineering Symposium, ASME, Norway, 1991.
38. Moghtaderi-Zadeh, M. and Madsen, H., Probabilistic analysis of buckling and collapse of plates in marine structures. In Proc. 6th Offshore Mechanics and Arctic Engineering Symposium, ASME, Houston, 1986.
39. Guedes Soares, C. and Silva, A. G., Reliability of unstiffened plate elements under in-plane combined loading. In Proc. 10th Offshore Mechanics and Arctic Engineering Symposium, ASME, Norway, 1991.
40. BS5400: Steel, Concrete and Composite Bridges; Part 3: Code of Practice for Design of Steel Bridges. British Standards Institution, London, 1982.
41. European Recommendations for the Design of Longitudinally Stiffened Webs and of Stiffened Compression Flanges. European Convention for Constructional Steelwork, ECCS Technical Working Group 8.3, Brussels, 1990.
42. Buckling Strength Analysis of Mobile Offshore Units, Classification Note 30.1. Det norske Veritas, Oslo, 1992.
43. Hart, D. K., Rutherford, S. E. and Wickham, A. H. S., Structural reliability analysis of stiffened panels. Trans. RINA, paper 9 (1985) 293-310.
44. Bonello, M. A. and Chryssanthopoulos, M. K., Buckling analysis of plated structures using system reliability concepts. In Proc. 12th Offshore Mechanics and Arctic Engineering Symposium, ASME, Glasgow, 1993.