Seismic analysis of base isolated buildings

Archives of Computational Methods in Engineering

Volumn 4, Issue 2, 1997, Pages 153-192

  Barbat, A H ^a   Bozzo, L M ^b  

^a UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

^b UNIVERSITY OF GIRONA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0031535220     PISSN: 11343060     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF03020128     Document Type: Article

References (88)

1. Ali, H.E. and Abdel-Ghaffer, A. (1995), "Modeling of rubber and lead passive-control bearings for seismic analysis", Journal of Structural Engineering, 121(7).
2. Amin, N. and Mokha, A. (1995), "Base isolation gets its day in court", Civil Engineering, (2), 44-47.
3. Arnold, C. (1984), "Soft first stories: Truths & myths", Eighth World Conference on Earthquake Engineering, San Francisco, 5, 943-950.
4. Barbat, A.M. and Canet, J.M. (1994), Estructuras Sometidas a Acciones Sísmicas, segunda edición, Centro Internacional de Métodos Numéricos en Ingeniería, Barcelona.
5. Barbat, A.H., Molinares, N. and Canas, J.A. (1993), "Simulación de sistemas de apoyo antisísmico con comportamiento no lineal", II Congreso de Métodos numéricos en Ingeniería, Navarrina F. and Casteleiro M., editors, Sociedad Española de Métodos Numéricos en Ingeniería (SEMNI), 359-368.
6. Barbat, A.H., Molinares, N. and Codina, R. (1996), "Effectiveness of block iterative schemes in computing the seismic response of buildings with nonlinear base isolation", Computers and structures, 58(1), 133-141.
7. Bozzo, L.M. and Barbat, A.H. (1995), "Nonlinear response of structures with sliding base isolation", Journal of Structural Control, 2(2), 59-77.
8. th US National Conference on Earthquake Engineering, Palm Springs, California.
9. Buckle, I.G. and Mayes, R.L. (1990), "Seismic isolation: history, applications, and performance - a world view", Earthquake Spectra, 6(2), 161-202.
10. Caspe, M.S. (1970), "Earthquake isolation of multi-story concrete structures", Journal of the American Concrete Institute, 923-933, 11.
11. Caspe, M.S. (1984), "Base isolation from earthquake hazards, an idea whose time has come!", Eighth World Conference on Earthquake Engineering, San Francisco, 5, 1031-1038.
12. Caspe, M.S. and Reinhorn, A.M. (1986), "The earthquake barrier. A solution for adding ductility to otherwise brittle buildings", Proceedings of ATC-17 Seminar on Base Isolation and Passive Energy Dissipation, San Francisco, California, 331-342.
13. Codina, R. (1992), "A Finite Element Model for Incompressible Flow Problems", Doctoral Dissertation, Universidad Politécnica de Cataluña, Barcelona.
14. Constantinou, M.C., Mokha, A. and Reinhorn, A.M. (1990), "Teflon Bearings in Base Isolation II: Modeling", Journal of Structural Engineering, ASCE, 116(2), 455-474.
15. Constantinou, M.C., Mokha, A.S. and Reinhorn, A.M. (1990), Experimental and Analytical Study of a Combined Sliding Disc Bearing and Helical Steel Spring Isolation System, Report NCEER-90-0019, National Center for Earthquake Engineering Research, State University of New York, Buffalo.
16. Constantinou, M.C. and Tadjbakhsh, I.G. (1984), "The optimum design of a base isolation system with frictional elements", Earthquake Engineering and Structural Dynamics, 12, 203-214.
17. Chalhoub, M.S. and Kelly, J.M. (1989), "Sliders and tension controlled reinforced elastomeric bearings combined for earthquake isolation", Earthquake Engineering and Structural Dynamics, 19, 333-344.
18. Derham, C.J. (1986), "Nonlinear natural rubber bearings for seismic isolation", ATC-17, Seminar on Base Isolation and Passive Energy Dissipation, California.
19. th European Conference on Earthquake Engineering, Vienna.
20. Dowrick, D.J., Cousins, W.J., Robinson, W.H. and Babor, J. (1992), "Recent developments in seismic isolation in New Zealand", Proceedings of the Tenth World Conference on Earthquake Engineering, Madrid, Spain, 4, 2305-2309.
21. Fan Fa-Gung, Ahmadi, G. and Tadjbakhsh, I.G. (1988), Base Isolation of a Multi-Story Building Under a Harmonic Ground Motion. A Comparison of Performances of Various Systems, Report NCEER-88-0010, National Center for Earthquake Engineering Research, State University of New York, Buffalo.
22. Fintel, M. and Khan, R.F. (1969), "Shock absorbing soft story concept for multistory earthquake structures", Journal of the American Concrete Institute, 66-29, 318-390.
23. Fujita, T., Suzuki, S. and Fujita, S. (1989), "Hysteretic restoring force characteristics of high damping rubber bearings for seismic isolation", ASME Pressure Vessels and Piping Conference, Hawai, PVP-181, 23-28.
24. Gadala, M.S. (1991), "Unified numerical treatment of hyperelastic and rubber-like constitutive laws", Communications in Applied Numerical Methods, 7, 581-587.
25. Griffith, M.C., Aiken, I.D. and Kelly, J.M. (1990a), "Comparison of earthquake simulator test results with SEAONC tentative seismic isolation design requirements", Earthquake Spectra, 6(2), 403-418.
26. Griffith, M.C., Aiken, I.D. and Kelly, J.M. (1990b), "Displacement control and uplift restrain for base-isolated structures", Journal of Structural Engineering, ASCE, 116(4).
27. Griffith, M.C., Kelly, J.M. and Aiken, I.D. (1988a), Experimental Evaluation of Seismic Isolation of a Nine-Story Braced Steel Frame Subject to Uplift, Report EERC-88/05, Earthquake Engineering Research Center, University of California, Berkeley.
28. Griffith, M.C., Kelly, J.M., Coveney, V.A. and Koh, C.G. (1988b), Experimental Evaluation of Seismic Isolation of Medium-Rise Structures Subject to Uplift, Report EERC-88/02, Earthquake Engineering Research Center, University of California, Berkeley.
29. Guerand, R., Noel-Leronx, J.P., Livolant, M. and Michalopoulos, A.P. (1985), "Seismic isolation using sliding-elastomer bearing pads", Nuclear Engng. and Design, 84, 363-377.
30. Hadjian, A.H. and Tseng, W.S. (1986), "A Comparative Evaluation of Passive Seismic Isolation Schemes", Base Isolation and Passive Energy Dissipation, C. Rojahn, editor, ATC-17, National Bureau of Standards, 291-304.
31. Ikonomou, A.S. (1985), "Alexisismon isolation engineering for nuclear power plants", Nuclear Engineering and Design, 85, 201-216.
32. Jané, L. and Barbat, A.H. (1992), Estructuras de edificación con aislamiento antisísmico, Monografía 13, Centro Internacional de Métodos Numéricos en Ingeniería, Barcelona.
33. Kelly, J.M. (1993), Earthquake-resistant design with rubber, Springer-Verlag, London.
34. Kelly, J.M. (1980), Testing of a Natural Base Isolation System by an Explosively Simulated Earthquake, Report EERC-80/25, Earthquake Engineering Research Center, University of California, Berkeley.
35. Kelly, J.M. (1983a), "Recent developments in aseismic base isolation", Symposium on Base Isolation of Structures, ASCE, Philadelphia.
36. Kelly, J.M. (1983b), The Economic Feasibility of Seismic Rehabilitation of Buildings by Base Isolation, Report EERC-83/01, Earthquake Engineering Research Center, University of California, Berkeley.
37. Kelly, J.M. (1986), "Aseismic base isolation: Rewiew and bibliography", Soil Dynamics and Earthquake Engineering, 5(3), 202-216.
38. Kelly, J.M. (1991), "Base isolation: Linear theory and design", Earthquake Spectra, 7(2), 301-323.
39. Kelly, J.M. (1991), "Base isolation: Origins and development", Bulletin of the Earthquake Engineering Research Center, University of California, Berkeley, 12(1).
40. Kelly, J.M. and Aiken, I.D. (1989), "Recent developments in testing base isolation systems", Proceedings, Seventh ASCE Structures Congress, American Society of Civil Engineers, San Francisco, California.
41. Kelly, J.M. and Beucke, K.E. (1983), "A friction damped base isolation system with fail safe characteristics", Earthquake Engineering and Structural Dynamics, 11, 33-56.
42. Kelly, J.M. and Tsai, H.C. (1984), Seismic Response of Light Internal Equipment in Base Isolated Structures, Report EERC-84/17, Earthquake Engineering Research Center, University of California, Berkeley.
43. Keowen, S., Amin, N., Mokha, A. and Ibanez, P. (1994), "Vibration Study of the U.S. Court of Appeals Building for Seismic Isolation Retrofit", First World Conference on Structural Control, California.
44. Kircher, C.A. and Lashkari, B. (1989), Statistical evaluation of nonlinear response of seismic isolation systems, Report JBA 109-070, 1, Jack R. Benjamin & Associates, Inc., Consulting Engineers, California.
45. Kirikov, B. (1992), History of Earthquake Resistant Construction, Instituto de Ciencias de la Construcción Eduardo Torroja, Madrid.
46. Koh, C.G. and Balendra, T. (1989), "Seismic response of base isolated buildings including P-Δ effects of isolation bearings", Earthquake Engineering and Structural Dynamics, 18, 461-473.
47. Koh, C.G. and Kelly, J.M. (1986), Effects of Axial Load on Elastomeric Isolation Bearings, Report EERC-86/12, Earthquake Engng. Research Center, Univ. of California, Berkeley.
48. Kwok, K. (1984), "Damping increase in building with tuned mass dampers, Journal of Engineering Mechanics Division, ASCE, 110(11), 1645-1649.
49. Leger, P., Wilson, E. and Clough, R. (1986), The use of load dependent vectors for dynamic and earthquake analysis, Report EERC-86/04, Earthquake Engineering Research Center, University of California, Berkeley.
50. Lin, B.C., Tadjbakhsh, I.G., Papageorgiou, A.S. and Ahmadi, G. (1989), "Response of base-isolated buildings to random excitations described by the Clough-Penzien spectral model", Earthquake Engineering and Structural Dynamics, 18, 49-62.
51. Li, L. (1984), "Base isolation measure for aseismic buildings in China", Eighth World Conference on Earthquake Engineering, San Francisco, California, 6, 791-798.
52. Mokha, A.S., Constantinou, M.C. and Reinhorn, A.M. (1988), Teflon Bearings in Aseismic Base Isolation: Experimental Studies and Mathematical Modeling, Report NCEER-88-0038, National Center for Earthquake Engng. Research, State University of New York, Buffalo.
53. Mokha, A.S., Constantinou, M.C. and Reinhorn, A.M. (1990), Experimental Study and Analytical Prediction of Earthquake Response of a Sliding Isolation System with a Spherical Surface, Report NCEER-90-0020, National Center for Earthquake Engineering Research, State University of New York, Buffalo.
54. Molinares, N. and Barbat, A.H. (1994), Edificios con aislamiento de base no lineal, Monografías de ingeniería sísmica, 5, Centro internacional de métodos numéricos en ingeniería.
55. Mostaghel, N. (1984), Resilient-Friction Base Isolator, Report UTEC 84-097, Univ. of Utah.
56. Mostaghel, N., Hejazi, M. and Khodaverdian, M. (1986), "Response of structures supported on resilient-friction base isolator", Proceeding 3th U. S. National Conference on Earthquake Engineering, Charleston, South Carolina, 1993-2003.
57. Mostaghel, N. and Khodaverdian, M. (1987), "Dynamics of resilient-friction base isolator (R-FBI)", Earthquake Engineering and Structural Dynamics, 15, 379-390.
58. Mostaghel, N. and Kelly, J.M. (1987), Design Procedures for R-FBI Bearings, Report No. EERC-87/18, Earthquake Engineering Research Center, University of California, Berkeley.
59. Mostaghel, N. and Khodaverdian, M. (1988), "Seismic response of structures supported on R-FBI system", Earthquake Engineering and Structural Dynamics, 16, 839-854.
60. Mostaghel, N. and Tanbakuchi, J. (1983), "Response of sliding structures to earthquake support motion", Earthquake Engineering and Structural Dynamics, 11, 729-748.
61. McKay, G.R., Chapman, H.E. and Kirkcaldie, D.K. (1990), "Seismic isolation: New Zealand applications", Earthquake Spectra, 6(2), 203-222.
62. Nagarajaiah, S., Reinhorn, A.M. and Constantinou, M.C. (1991), 3D-BASIS - Nonlinear Dynamic Analysis of Three-Dimensional Base Isolated Structures: Part II, Report NCEER-91-0005, National Center for Earthquake Engineering Research, State University of New York at Buffalo.
63. Nagashima, I., Kawamura, S., Kitazawa, K. and Hisano, M. (1987), "Study on a base isolation system", Proceedings of the Third Conference on Soil Dynamics and Earthquake Engineering, Princeton University.
64. Pan, T.C. and Cui, W. (1994), "Dynamic characteristics of shear buildings on laminated rubber bearings", Earthquake Engineering and Structural Dynamics, 23, 1315-1329.
65. Pinto, P.E. and Vanzi, I. (1992), "Base-isolation: Reliability for different design criteria", Proceedings of the Tenth World Conf. on Earthquake Engng., Madrid, 4, 2033-2038.
66. Robinson, W.H. (1982), "Lead-rubber hysteretic bearings suitable for protecting structures during earthquakes", Earthquake Engineering and Structural Dynamics, 10, 593-604.
67. Rodwell, E., Ehrman, C.S., Maeno, Y., Sigal, G.B. y Womack, G.J. (1990), "Electric power research institute contribution to international utility industry seismic isolation development program", Earthquake Spectra, 6(2).
68. SEAOC (1990), Structural Engineering Association of California, "Tentative general requirements for the design and construction of seismic isolated structures", Appendix IL of Reccomended Lateral Force Requirements and Commentary Blue Book, California.
69. Shustov, V. (1992), "Base isolation: Fresh insight", Proceedings of the Tenth World Conference on Earthquake Engineering, Madrid, Spain, 4, 1983-1986.
70. Skinner, R.I., Robinson, W.H. and McVerry, G.H. (1993), An Introduction to Seismic Isolation, John Wiley & Sons, Chichester.
71. Skinner, R.I., McVerry, G.H. and Robinson, W.H. (1992), "Developments in understanding, analysing and designing structures with aseismic isolation", Proceedings of the Tenth World Conference on Earthquake Engineering, Madrid, Spain, 4, 1977-1982.
72. Skinner, R.I., Kelly, J.M. and Heine, A.J. (1975), "Hysteric dampers for earthquake-resistant structures", Earthquake Engineering and Structural Dynamics, 3, 287-296.
73. SMIRT11 (1991a), "Base isolation and vibration control systems" in Seismic Isolation and Response Control for Nuclear and Non-Nuclear Structures, SMIRT 11, Tokyo, 137-148.
74. SMIRT11 (1991b), "Seismic isolation and vibration control system" in Seismic Isolation and Response Control for Nuclear and Non-Nuclear Structures, SMIRT 11, Tokyo, 85-92.
75. SMIRT11 (1991c), "Rubber technology for seismic isolation", en Seismic Isolation and Response Control for Nuclear and Non-Nuclear Structures, SMIRT 11, Tokyo, 45-56.
76. Su, L., Ahmadi, G. and Tadjbakhsh, I.G. (1989), "A comparative study of performances of various base isolation systems. Part I: Shear beam structures", Earthquake Engineering and Structural Dynamics, 18, 11-32.
77. Su, L., Ahmadi, G. and Tadjbakhsh, I.G. (1990), "A comparative study of performances of various base isolation systems. Part II: Sensitivity analysis", Earthquake Engineering and Structural Dynamics, 19, 21-33.
78. Tajirian, F.F., Kelly, J.M. and Aiken, I.D. (1990a), "Seismic isolation for advanced nuclear power stations", Earthquake Spectra, 6(2), 371-402.
79. Tajirian, F.F., Kelly, J.M., Aiken, I.D. and Veljovich, W. (1990b), "Elastomeric bearings for three-dimensional seismic isolation", ASME PVP Conference, Nashville, Tennessee.
80. Tajirian, F.F. and Kelly, J.M. (1987), "Seismic and shock isolation system for modular power plants", The 1987 Pressure Vessels and Piping Conference, California.
81. Tsopelas, P. and Constantinou, M.C. (1994), NCEER-Taisei Corporation Research Program on Sliding Seismic Isolation Systems for Bridges: Experimental and Analytical Study of a System Consisting of Sliding Bearings and Fluid Restoring Force/Damping Devices, Report NCEER-94-0014, National Center for Earthquake Engineering Research, State University of New York at Buffalo.
82. Way, D. and Jeng, V. (1988), "NPAD - A computer program for the analysis of base isolated structures", ASME Pressure Vessels and Piping Conference, Pennsylvania, PVP-147, 65-94.
83. Way, D. and Howard, J. (1990), "Seismic rehabilitation of the Mackay School of Mines, Phase III, with base isolation", Earthquake Spectra, 6(2), 297-308.
84. Way, D. and Howard, J. (1992), "Rehabilitation of the Mackay School of Mines, Phase III, with base isolation", Proceedings of the Tenth World Conf. on Earthquake Engineering, Madrid, Spain, 4, 2027-2031.
85. Wen, Y.K. (1976), "Method for random vibration of hysteretic systems", Journal of the Engineering Mechanics Division, ASCE, 102, 249-263.
86. Zayas, V.A., Low, S., Bozzo, L.M. and Mahin S. (1989), Feasibility and Performance Studies on Improving the Earthquake Resistance of New and Existing Buildings using the Friction Pendulum Base Isolation System, Report UCB-EERC 89-09, Earthquake Engineering Reserach Center, University of California at Berkeley.
87. Zayas, V.A., Low, S.S. and Mahin, S.A. (1988), The FPS Earthquake Resisting System: Experimental Report, Report EERC-87/01, 16, Earthquake Engineering Research Center, University of California, Berkeley, 839-854.
88. Zayas, V.A., Low, S.S. and Mahin, S.A. (1990), "A simple pendulum technique for achieving seismic isolation", Earthquake Spectra, 6(2), 317-334.